Re: Airport stops working.
El Viernes, 21 de Octubre de 2005 00:07, Benjamin Herrenschmidt escribió:
> You mean that occasionally, when you boot, it doesn't work ?
No, when i boot the computer, the card works ok, but from time to time, it
stops working. Ifdowning ang ifuping again doesn't solve the problem, and
neither does rmmoding airport, hermes...
I seems more an issue of
eth1: New link status: Connected (0001)
eth1: New link status: Disconnected (0002)
as Wojciech says in his message.
But i don't know how to trace the problem better or reproduce.
For that is what I need help, so I could be more precise.
Regards,
Enric
PD: It happened again while I was typing this message. Looking at logs, I've
found this, perhaps its useful:
Oct 21 16:19:00 fourier kernel: eth0: Hardware identity 0005:0001:0001:0002
Oct 21 16:19:00 fourier kernel: eth0: Station identity 001f:0001:0008:0046
Oct 21 16:19:00 fourier kernel: eth0: Firmware determined as Lucent/Agere 8.70
Oct 21 16:19:00 fourier kernel: eth0: Ad-hoc demo mode supported
Oct 21 16:19:00 fourier kernel: eth0: IEEE standard IBSS ad-hoc mode supported
Oct 21 16:19:00 fourier kernel: eth0: WEP supported, 104-bit key
Oct 21 16:19:00 fourier kernel: eth0: MAC address 00:30:65:26:FF:7C
Oct 21 16:19:00 fourier kernel: eth0: Station name "HERMES I"
Oct 21 16:19:00 fourier kernel: eth0: ready
Oct 21 16:19:00 fourier kernel: airport: Card registered for interface eth0
Oct 21 16:19:00 fourier kernel: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet
00:0a:95:71:d1:a8
Oct 21 16:19:00 fourier kernel: eth0: Found BCM5221 PHY
Oct 21 16:19:00 fourier kernel: eth1: New link status: Connected (0001)
It's really messed with eth0 and eth1, and iwconfig says eth0 has no wireless
extensions.
Reply to: