2.6.8.1 doesn't boot
Hello all...now that I've gotten my serial console to work, I've got a
log to share. At the very bottom of the log, I get stuck there, no more
boot activity after that. After a few minutes, I reboot. Can anyone
help?
Russell
Total memory = 384MB; using 1024kB for hash table (at c0500000)
Linux version 2.6.8.1 (root@poet) (gcc version 3.3.4 (Debian
1:3.3.4-6sarge1)) #
1 Thu Oct 7 09:17:04 EDT 2004
Found a Heathrow mac-io controller, rev: 1, mapped at 0xfdc80000
PowerMac motherboard: PowerMac G3 (Silk)
Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus
number: 0->0
L2CR overriden (0xa9100000), backside cache is enabled
nvram: OF partition at 0x1800
nvram: XP partition at 0x1300
nvram: NR partition at 0x1400
Built 1 zonelists
Kernel command line: root=/dev/hda6 video=tdfx:1024x768-8@60
keyboard_sends_linu
x_keycodes=1 noaccel console=ttyS1,9600n8
System has 64 possible interrupts
PID hash table entries: 2048 (order 11: 16384 bytes)
GMT Delta read from XPRAM: -240 minutes, DST: on
via_calibrate_decr: ticks per jiffy = 16708 (1002492 ticks)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 383488k available (3100k kernel code, 1484k data, 192k init, 0k
highmem)
Calibrating delay loop... 532.48 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:12.0
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
atyfb: 3D RAGE PRO (PQFP, PCI) [0x4750 rev 0x7c] 6M SGRAM, 14.31818 MHz
XTAL, 23
0 MHz PLL, 100 Mhz MCLK
atyfb: monitor sense=73f, mode 6
fb0: ATY Mach64 frame buffer device on PCI
fb: 3Dfx Voodoo3 memory = 16384K
MacOS display is /pci/3Dfx,Voodoo3
Thermal assist unit using timers, shrink_timer: 2000 jiffies
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block numbers, no debug enabled
PCI: Via IRQ fixup for 0000:00:0e.0, from 24 to 8
PCI: Via IRQ fixup for 0000:00:0e.1, from 24 to 8
Console: switching to colour frame buffer device 80x30
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
[drm] Initialized tdfx 1.0.0 20010216 on minor 0: 3Dfx Interactive, Inc.
Voodoo
3
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
pmac_zilog: Error registering serial device, disabling pmac_zilog.
pmac_zilog: Did another serial driver already claim the minors?
Reply to: