Re: albook 15": bluetooth stopped working after firmware upgrade to 1.1
On Wed, 2004-04-21 at 14:58, Sebastian Henschel wrote:
> hi folks..
>
> hw: albook 15"
> kernel: 2.6.5-rc3-ben0-mh3 (mh3 means latest bluetooth patches)
>
> today, i did a software update on OS X which brought a new firmware
> (1.1) for the bluetooth device. this firmware should improve the behaviour of
> bluetooth keyboards and mice. so far, under OS X, i can still talk to my
> mobile phone.
> now under linux, i do not have a device hci0 anymore and thus no
> connection to my phone. the driver hci_usb loads just fine, but does not
> generate the needed device. by chance, i found out, that the bluetooth
> device claims to be something different than before in the list of USB
> devices:
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 44/900 us ( 5%), #Int= 2, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.5-rc3-ben0-mh3 ohci_hcd
> S: Product=PCI device 106b:003f (Apple Computer Inc.)
> S: SerialNumber=0001:01:1a.0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=05ac ProdID=1000 Rev=12.41
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
> E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>
> please note the device in lev 01. usbview says that Prot 01 and 02 are
> keyboard and mouse protocols. interesting coincidence...
> since i looked quite often into /proc/bus/usb/devices in the last days,
> i strongly believe that the device had more interfaces back then.
> could someone of you please send me the relevant part of your output of
> /proc/bus/usb/devices? with that information, i hope to be able to persuade
> hci_usb to treat this device as a bluetooth device again. though perhaps
> i am completely misguided here...
>
> thanks,
> sebastian
apple.com, on its "Bluetooth Firmware Updater 1.1":
"Important: Applying this firmware updater to a D-Link USB to Bluetooth
adapter will make it incompatible with non-Macintosh systems."
<http://www.apple.com/support/downloads/bluetoothfirmwareupdater.html>
Anybody out there who knows more on that in the meantime, i.e. is there
already a fix for it, or workaround, or whatever?
Or is there even someone out there with a working bluetooth on Linux ppc
after upgrading the machine to the new Buetooth Firmware?
Thanks in anticipation.
Best Regards
Wolfgang
--
Profile, Links: http://profiles.yahoo.com/wolfgangpfeiffer
Reply to: