PCMCIA in pb g3
Here I am, writing about the pcmcia again...
Is there anyone who's got it working, everything else works excellent..
and now i wish to use the pcmcia-port to read my compact-flash cards.
Some additional information;
cat /proc/iomem:
80000000-afffffff : /pci@f2000000
80000000-8007ffff : 0001:01:17.0
80000000-8007ffff : 0.80000000:mac-io
80000034-80000034 : 0.00000034:media-ba
80000034-80000034 : media-bay
80000050-8000007f : 0.00000050:gpio
80008800-800088ff : 0.00014000:davbus
80008800-800088ff : davbus (tx dma)
80008900-800089ff : 0.00014000:davbus
80008900-800089ff : davbus (rx dma)
80008a00-80008aff : 0.0001f000:ata-4
80008a00-80008aff : ide-pmac (dma)
80008b00-80008bff : 0.00020000:ata-3
80008b00-80008bff : ide-pmac (dma)
80008c00-80008cff : 0.00021000:ata-3
80008c00-80008cff : ide-pmac (dma)
80013000-80013000 : 0.00013000:ch-b
80013000-80013000 : pmac_zilog
80013010-80013010 : 0.00013000:ch-b
80013010-80013010 : pmac_zilog
80013020-80013020 : 0.00013020:ch-a
80013020-80013020 : pmac_zilog
80013030-80013030 : 0.00013020:ch-a
80013030-80013030 : pmac_zilog
80013040-80013040 : 0.00013000:ch-b
80013040-80013040 : pmac_zilog
80013050-80013050 : 0.00013020:ch-a
80013050-80013050 : pmac_zilog
80014000-80014fff : 0.00014000:davbus
80014000-80014fff : davbus
80015000-80015fff : 0.00015000:timer
80016000-80017fff : 0.00016000:via-pmu
80016000-80017fff : via-pmu
80018000-80018fff : 0.00018000:i2c
8001a000-8001a0ff : 0.00030000:radio
8001f000-8001ffff : 0.0001f000:ata-4
8001f000-8001ffff : ide-pmac (ports)
80020000-80020fff : 0.00020000:ata-3
80020000-80020fff : ide-pmac (ports)
80021000-80021fff : 0.00021000:ata-3
80030000-800300ff : 0.00030000:radio
80030000-800300ff : airport
80040000-8007ffff : 0.00040000:interrup
80040000-8007ffff : interrupt-controller
a0000000-a0000fff : 0001:01:1a.0
a0001000-a0001fff : 0001:01:19.0
a0001000-a0001fff : ohci_hcd
a0002000-a0002fff : 0001:01:18.0
a0002000-a0002fff : ohci_hcd
b0000000-bfffffff : /pci@f0000000
b0000000-b0003fff : 0000:00:10.0
b0000000-b0003fff : aty128fb MMIO
b4000000-b7ffffff : 0000:00:10.0
b4000000-b7ffffff : aty128fb FB
f1000000-f1ffffff : /pci@f0000000
f3000000-f3ffffff : /pci@f2000000
f5000000-f5ffffff : /pci@f4000000
f5000000-f5000fff : 0002:06:0e.0
f5000000-f50007ff : ohci1394
f5200000-f53fffff : 0002:06:0f.0
f5200000-f53fffff : eth0
f8000000-f8ffffff : uni-n
cat /proc/ioports:
00000000-007fffff : /pci@f2000000
00000060-0000006f : i8042
00802000-01001fff : /pci@f0000000
00802400-008024ff : 0000:00:10.0
ff7fe000-ffffdfff : /pci@f4000000
cat /etc/pcmcia/config.opts: (someone spoke about this ranges, but i
dont really know..!)
include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
include memory 0x80080000-0x8008ffff
/etc/init.d/pcmcia start
Starting PCMCIA services: cardmgr[1477]: no sockets found!
done.
Using 2.6.3-ben2 and pcmcia-cs
Can anyone from this information tell me how to solve the problem with
the pcmcia not working?
greetings
David 'fenrus' Syk
Reply to: