Re: Albook 15" CD/DVD burning
On Sun, Jan 11, 2004 at 03:30:07PM +0100, eric.bachard@b.org wrote:
> Hi,
>
> Luis Sanjuan a écrit :
> >On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
> >wrote:
> >
> >>Hi,
> >>
> >> today I tried to get burning working with my new Powerbook 15". Has
> >>anyone of you already burnt successfully with the PBook?
> >
> >
> >Succes here as well with CD burning on an AlBook 17" (now without SCSI
> >emulation):
> >
> >cdrecord -dev=/dev/hdc <your-image-file>
> >
>
> The docuumentation of cdrecord says the syntax is :
> dev=ATAPI:bus,target,lun
>
Thanks for your advise, Eric.
'-dev=/dev/hdc' option is a recomendation I've read in many documents about
2.5-2.6 migration.
For example:
http://www.linux.org.uk/~davej/docs/post-halloween-2.6.txt
http://lwn.net/Articles/13160/
Greetings.
> So, now, how to find the good device ?
>
> For example :
>
> cdrecord -scanbus -dev=ATAPI give :
>
> alube:/home/eric# cdrecord -scanbus -dev=ATAPI
> Cdrecord-Clone 2.01a19 (powerpc-unknown-linux-gnu) Copyright (C)
> 1995-2003 Jörg Schilling
> scsidev: 'ATAPI'
> devname: 'ATAPI'
> scsibus: -2 target: -2 lun: -2
> Warning: Using ATA Packet interface.
> Warning: The related libscg interface code is in pre alpha.
> Warning: There may be fatal problems.
> Using libscg version 'schily-0.7'
> scsibus0:
> 0,0,0 0) 'MATSHITA' 'DVD-R UJ-816 ' 'DXJ3' Removable CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
>
> So, for direct CD-burning, you'll have to do :
>
> cdrecord -v image.iso speed=supported_speed dev=ATAPI:bus,target,lun
>
> BTW : first : what is new is "ATAPI:", secondly I don't know the
> supported speed value ]
>
>
> Finally, a good command line is :
>
>
> cdrecord -v image.iso speed=supported_speed dev=ATAPI:0,0,0
>
>
> >DVD burning not tested.
> >
>
> For DVD burning, you'll have to download the powerpc version of
> cdreocrd-dvd-pro, called, if I'm not wrong,
> "cdrecord-prodvd-2.0-powerpc-unknown-linux-gnu" on the cdrecord ftp
> site. (free for personnal use)
>
> I think You'll have to ask a key. For this, read the doc carefully.
>
>
> >
>
> Regards,
> eric
>
>
> --
> NO ePATENTS / NON AUX BREVETS SUR LES LOGICIELS. See / Voir
> http://swpat.ffii.org/
>
> eric bachard
>
>
> --
> To UNSUBSCRIBE, email to debian-powerpc-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
Reply to: