Re: How to get infrared and/or Nokia working
Hi Julien and everybody
Finally, irdadump is showing these:
19:40:11.620026 xid:cmd b9e67de2 > ffffffff S=6 s=3 (14)
19:40:11.710036 xid:cmd b9e67de2 > ffffffff S=6 s=4 (14)
19:40:11.800029 xid:cmd b9e67de2 > ffffffff S=6 s=5 (14)
19:40:11.880010 xid:rsp b9e67de2 < 0000dc28 S=6 s=5 Nokia 6100
hint=b125 [ PnP Modem Fax Telephony IrCOMM IrOBEX ] (27)
19:40:11.890052 xid:cmd b9e67de2 > ffffffff S=6 s=* lombi hint=0400 [
Computer ] (21)
But still no luck with gnokii.
I've tried with both
cat /proc/sys/net/irda/max_baud_rate
16000000
and
echo "57600" > /proc/sys/net/irda/max_baud_rate
irdadump showed correct output with both, gnokii did not work with either.
Here's what I get from gnokii:
with model = 6100 in /root/.gnokiirc:
root@lombi root# xgnokii
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
GSM/FBUS init failed!
Xlib: unexpected async reply (sequence 0x3897)!
with model = 6110:
root@lombi root# xgnokii
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
root@lombi root# gnokii --identify
GNOKII Version 0.5.2
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
Timeout: aborting command ``/usr/lib/gnokii/gnokii'' with signal 9
/usr/bin/gnokii: line 16: 28743 Getötet timeout
$TIMEOUT $BINARY "$@"
There's a ./common/phones/nk6100.c in the debian sources,
and:
root@lombi root# strings /usr/lib/libgnokii.so.1.0|grep 6100
driver_nokia_6100
root@lombi root# strings /usr/lib/libgnokii.so.1.0|grep 6110
6110
6110|6130|6150|6190|5110|5130|5190|3210|3310|3330|3360|3410|8210|8250|8290|5100|RPM-1
Does that mean 6100 is supported or not?
I've never seen any other packet in irdadump output than those
already shown above (i.e. normal discovery activity).
At 8:37 Uhr +0100 26.10.2003, Julien BLACHE wrote:
> b) anyone succeeded in using gnokii with a mac?
Yes, works fine. At least last I tried, which was some months ago with
a 2.4.20-benh kernel.
But you shouldn't use /dev/ttyS1. You should load the ircomm module
and use /dev/ircomm0.
Only for minicom, right? (or also for gnokii? I guess that no?)
The irda port on the mac can be used as a SIR device (what you're
currently doing), I think it could be used as a FIR device too but
there is currently no driver for that (assuming it's possible at all,
which I'm not sure).
Aren't you using a FIR driver, if you have
* irda-common/firdev: smc-ircc
in your irda-common configuration?
At 20:51 Uhr +0100 01.11.2003, Julien BLACHE wrote:
Here's what I answered when installing irda-common :
Here's my new config:
* irda-common/ttydev: /dev/ttyS1
* irda-common/aboutdoc:
* irda-common/enable: true
* irda-common/changes:
irda-common/mkirdev:
* irda-common/discovery: true
* irda-common/regen: true <---how to change that?
* irda-common/dongle: none
irda-common/firdev: <----there was no possiblity to choose smc-ircc
irda-common/firopt:
* irda-common/selectdevice: serial
Where's the smc-ircc coming from that you are using?
Here are the only modules shown by lsmod that were loaded by my tests:
irtty 7072 2 (autoclean)
irda 101572 0 (autoclean) [irtty]
The device (ttydev) to use is the _serial_ device on which the IrDA
port is attached, so that would be /dev/ttyS1 and not /dev/ircomm0
(that you should use when you want to reach a device over the IrDA
link).
(I know what a serial protocol looks like; I know a little bit about
talking to serial devices on linux; now is ircomm implemented on top
of serial or vice versa or are they both implemented on top of
something else - i.e. what does the protocol look like that's
flashing the lights, normal serial or not?)
Use ps to see what options where passed to irattach. You should find
the serial device (/dev/ttyS1) and the discovery option (-s).
yep that's the case.
> the above lines. /etc/init.d/irda restarts a new instance of
irattach. /etc/init.d/irda stop does not terminate them. kill does
Yes, I've had this problem, however, I no longer experience that with
2.4.22-ben2 and an up-to-date unstable system (dunno which of the
kernel or userspace tools changed, but that doesn't happen anymore).
Running 2.4.22-ben1 and (+-) up-to-date unstable.
Non-commentedout contents of /root/.gnokiirc:
[global]
port = /dev/ttyS1
model = 6110
initlength = default
connection = irda
bindir = /usr/sbin/
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
Thanks for the endurance
Christian.
Reply to: