Re: [ballen@gravity.phys.uwm.edu: Re: Re: HDD failing? :'( (fwd)]
You need a new disk. If under warranty call Fujitsu. They may ask you to
run their "disk test" utility. It will find the same problem. If you are
lucky you'll get someone who understand when you say "it failed the
extended SMART self test" and they'll not make you go through the
additional step.
Bruce
On Tue, 14 Oct 2003, J. Javier Maestro wrote:
> On Oct Tue 14 2003 14:21, Guido Guenther wrote:
> > On Tue, Oct 14, 2003 at 09:23:30PM +1000, J. Javier Maestro wrote:
> > > SMART Self-test log structure revision number 1
> > > No self-tests have been logged
> > Could you run "smartctl -t long <device>" and see if anything changes here?
>
> I just finished it! :) 83 min test!
>
> Here it is
>
> smartctl version 5.1-18 Copyright (C) 2002-3 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: FUJITSU MHS2060AT
> Serial Number: NL24T3114CF3
> Firmware Version: 8105
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 6
> ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
> Local Time is: Tue Oct 14 22:47:28 2003 EST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Off-line data collection status: (0x02) Offline data collection activity was
> completed without error.
> Auto Off-line Data Collection: Disabled.
> Self-test execution status: ( 105) The previous self-test completed having
> the servo (and/or seek) element of the
> test failed.
> Total time to complete off-line
> data collection: ( 492) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Automatic timer ON/OFF support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging support.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 83) minutes.
> Conveyance self-test routine
> recommended polling time: ( 2) minutes.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 55893
> 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 308
> 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 25601
> 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 382
> 5 Reallocated_Sector_Ct 0x0033 080 080 024 Pre-fail Always - 497
> 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2872
> 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
> 9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 17409234
> 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
> 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 251
> 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 28
> 193 Load_Cycle_Count 0x0032 049 049 000 Old_age Always - 190249
> 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Lifetime Min/Max 21/52)
> 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1950
> 196 Reallocated_Event_Count 0x0032 080 080 000 Old_age Always - 480
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
> 200 Multi_Zone_Error_Rate 0x000f 084 071 060 Pre-fail Always - 8616438
> 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3732317666876
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
> # 1 Extended off-line Completed: servo/seek failure 90% 4834 -
>
>
> Seesh... the last line sounds really bad... does that mean that when the
> remaining % reaches 50% I will have quite many chances of my servo/seek
> head messing up? I know that laptops don't last forever but... already
> 10% in less than a year? :_(
>
> Anyways, if you find more significant data in the readings, please let
> me know. Thank you very much for your help, Guido.
>
>
> --
> J. Javier Maestro
> <jjmaestro@computer.org>
> http://rigel.homelinux.com
>
>
Reply to: