Re: [ballen@gravity.phys.uwm.edu: Re: Re: HDD failing? :'( (fwd)]
Guido,
here is the test with smartctl -v 9,seconds -t offline /dev/hda4
smartctl version 5.1-18 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHS2060AT
Serial Number: NL24T3114CF3
Firmware Version: 8105
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Tue Oct 14 21:20:35 2003 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x02) Offline data collection activity was
completed without error.
Auto Off-line Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete off-line
data collection: ( 492) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 229229
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 308
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 25601
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 382
5 Reallocated_Sector_Ct 0x0033 080 080 024 Pre-fail Always - 497
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2502
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 17404082
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 251
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 28
193 Load_Cycle_Count 0x0032 049 049 000 Old_age Always - 190154
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 41 (Lifetime Min/Max 21/52)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 11951
196 Reallocated_Event_Count 0x0032 080 080 000 Old_age Always - 480
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 084 071 060 Pre-fail Always - 4679553
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3732317077049
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged
About the damaged sectors, I know 497 sectors is not that much, but, I
mean, the laptop is under warranty... would you consider going to Apple
to get them to change the HDD?
Thanks so much for the help,
--
J. Javier Maestro
<jjmaestro@computer.org>
http://rigel.homelinux.com
Reply to: