Re: tibookIII + projector
> How to configure XF86Config-4 to use my laptop (video card M7) with a
> projector? I have to give a conference next week. The projector is in
> the conference room. I need to have enabled the _two_ screens there. But
> I haven't chance to test the possible configurations. I've read in
> Cristophe's web page about TiBookIII:
>
> > Depending on the X configuration both screens will work correctly or
> > only one.
>
Finally, I had to use MacOs X. I couldn't resolve the resolution
problem.
Does anybody know how to make compatible the special resolution of
TiBook III to use with a projector?
I'd like use Linux in future.
This is my XF86Config-4
=====================================================================
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf,
the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make
changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a
dexconf-generated
# XF86Config or XF86Config-4 file?" in
/usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7110" # local font
server
# if the local font server has problems, we can fall back on
these
FontPath "/usr/lib/X11/fonts/misc"
# FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/75dpi"
# FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
# Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
# Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
# My customization
Option "LeftAlt" "Meta"
Option "RightAlt" "Meta"
Option "ScrollLock" "Compose"
Option "RightCtl" "Control"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
# Option "XkbModel" "macintosh"
Option "XkbLayout" "es"
# Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon 7500"
Driver "radeon"
BusID "PCI:0:16:0"
# Option "UseFBDev" "true"
Option "DRIReinit" "true"
Option "ForcePCIMode" "false"
Option "AGPMode" "4"
Option "Monitor" "CRT"
EndSection
Section "Monitor"
Identifier "LCD Panel"
HorizSync 40-100
VertRefresh 40-120
Option "DPMS"
Mode "1280x854"
# D: 79.815 MHz, H: 51.963 kHz, V: 60.003 Hz
DotClock 79.816
HTimings 1280 1296 1408 1536
VTimings 854 855 858 866
EndMode
EndSection
Section "Monitor"
Identifier "projector"
HorizSync 30-70
VertRefresh 48-120
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Mobility Radeon 7500"
Monitor "LCD Panel"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x854"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI Mobility Radeon 7500"
Monitor "sony"
DefaultDepth 24
Option "NoAccel"
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0"
Screen "Screen1"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
### END DEBCONF SECTION
LuiS.
Reply to: