Re: New sleep code for ATI M6, M7 and M9
On Wednesday 19 March 2003 17:24, Francesco Rao wrote:
> Jamie Wilkinson wrote:
> >TiBook IV, Radeon M9. Commenting out Load "dri" and the Section "DRI"
> > from XF86Config-4 sleeps and wakes up, with DRI enabled the screen
> > doesn't come back on. I do not know if it has woken up, though.
> Hi all,
> I've a TiBook 15' 1GHz SuperDrive.
> For me it is the same story.
> - I'm able to awake from sleep only when DRI is off. No matter if I
> have "DRIReinit" option on or off
I had the same problems with DRI on a TiBook IV 1GHz with M9, although on a
gentoo (nobody's perfect...) and running xfree-4.3.0 and gentoo's xfree-drm
(should be same source as debian drm-trunk-modules). I wasn't able to awake
from sleep with DRI enabled and the "DRIReinit" option on. Furthermore, I
would get the following warning in my XFree86.log :
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(WW) RADEON(0): Option "DRIReinit" is not used
However I got it working, following advice on the gentoo forums, by adding the
"ForcePCIMode" "false" and "AGPMode" "4" options to my XF86Config-4, which
thus is as follows :
Option "UseFBDev" "true"
Option "DRIReinit" "true"
Option "ForcePCIMode" "false"
Option "AGPMode" "4"
Now I still get the "DRIReinit not used", but dri is enabled and my 'book goes
to sleep and wakes up like a charm (well, except, alsa gets a bit messed up
and has to be restarted, and it is definitely not a good idea to leave the
firewire HD mounted...).
The usual bits of info:
cpu : 7455, altivec supported
clock : 1000MHz
revision : 3.2 (pvr 8001 0302)
bogomips : 997.28
machine : PowerBook3,5
motherboard : PowerBook3,5 MacRISC2 MacRISC Power Macintosh
detected as : 80 (PowerBook Titanium IV)
pmac flags : 0000000b
L2 cache : 256K unified
memory : 512MB
pmac-generation : NewWorld
Bus 0, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth 1.5 AGP (rev 0
Bus 0, device 16, function 0:
VGA compatible controller: PCI device 1002:4c66 (ATI Tec
hnologies Inc) (rev 1).