[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Powerbook G3, video device not found

Hi All-

I have just installed woody on my Powerbook Bronze, and I have hit a wall
trying to get XF86 4 running.  I have been running MkLinux for the past two
years, and I thought it was about time that I made the change :)

I am using the 2.2.19 kernel, and I installed off the net, so I am pretty
sure all the software is up to date.  Basically, the problem is that my
video card is not being found, even though it shows up in the startup
message and 'X -scanpci'.  I included all the info that I thought would be
helpfull because I have basically run out of ideas.

Some other info that might be usefull...  I am using an external monitor
since my LCD is cracked.  I have been told by a friend that should not
really make a difference, but I thought I would throw it in there...

There must be someone on this list running XF86 4 on a Lombard.  If you
have any tips, I would love them.  I want a GUI agian!!!

Thanks for any help-  Neil Macneale

The tail of the stderr from startx:

(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
	ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
	ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
	ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE (AGP)
(WW) ATI:  PCI/AGP Mach64 in slot 0:17:0 could not be detected!
(EE) No devices detected.

Fatal server error:
no screens found

Device section of XF86Config-4:

Section "Device"
	Identifier	"Generic Video Card"
	BusID		"PCI:0:17:0"
	Driver		"ati"
	Option		"UseFBDev"		"true"

Output from `X -scanpci`:

Probing for PCI devices (Bus:Device:Function)

(0:0:0) Motorola MPC105 Grackle
(0:14:0) unknown card (0x11c1/0x5801) using an unknown chipset(0x11c1/0x5801)
(0:16:0) unknown chip (DeviceId 0x0017) from Apple
(0:17:0) ATI Mach64 LI
(0:19:0) unknown chip (DeviceId 0xac1e) from Texas Instruments

Startup info:
MacOS display is /pci/ATY,LTProParent/ATY,264LTProA
atyfb: 3D RAGE LT PRO [0x4c49 rev 0xdc] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK
7b33a140 82010182 14651a7b e0000c01     03000300      002a063f   01b005f0
PLL ad d5 3c 64 c8 13 00 80 8e 9e 65 01 a6 1b 00 00
atyfb: monitor sense=221, maps to mode 2
Console: switching to colour frame buffer device 128x48
fb0: ATY Mach64 frame buffer device on /pci/ATY,LTProParent

Reply to: