Re: mac serial port settings in linux

[dylan <dylan@iici.no-ip.org>]

thanks to all that sent ideas,

i finally just resorted to installing minicom, and setting up the ports with
that. it seems to work just fine.

thanks!

dylan

on 03.5.20 10:55 AM, Mich Lanners at mlan@cpu.lu was reported to have
writen:

> On  20 May, this message from Boris Bezlaj echoed through cyberspace:
>>> this might be a really dumb question... but: is there any easy way to
>>> set my serial ports to a given speed, parity, ect - and have those
>>> changes stay?
>> 
>> Take a look inside /etc/init.d/setserial and /var/lib/setserial/*
> 
> Nope. That's essentially i386-only, and doesn't give options for speed
> or parity.
> 
> The only thing I can think of is a custom init script in /etc/init.d
> linked into the proper /etc/rc[].d, containing a cal to stty for each
> port you want to configure.
> 
> But ideally, your application should perform all required serial port
> config.
> 
> Cheers
> 
> Michel
> 
> -------------------------------------------------------------------------
> Michel Lanners                 |  " Read Philosophy.  Study Art.
> 23, Rue Paul Henkes            |    Ask Questions.  Make Mistakes.
> L-1710 Luxembourg              |
> email   mlan@cpu.lu            |
> http://www.cpu.lu/~mlan        |                     Learn Always. "
> 





-- 
"The world is a dangerous place to live; not because of the people who are
evil, but because of the people who don't do anything about it."
-Albert Einstein