[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#795131: segfault in libvclplug_gtk3lo.so to use gcc5 libraries



Chris,

Now that you told me this happens reproducibly with a long click, I was able to make it happen with --backtrace
and got a much more useful trace than the one I sent earlier (attached).

 
thanks,
--jack


From: JS <jshaio@yahoo.com>
To: Chris Halls <halls@debian.org>; "795131@bugs.debian.org" <795131@bugs.debian.org>
Sent: Monday, September 14, 2015 10:53 AM
Subject: Re: Bug#795131: segfault in libvclplug_gtk3lo.so to use gcc5 libraries

Thanks Chris,

It was exactly reproduced by a long click, just as you said.

I hadn't noticed that before although the click only needs to last about 2 seconds so one barely notices it's long.

I was able to run under gdb but this is all I got (could retry if you suggest a group of breakpoints to set):

Breakpoint 2, __GI_exit (status=139) at exit.c:103
103 exit.c: No such file or directory.
(gdb) bt
#0  __GI_exit (status=139) at exit.c:103
#1  0xb7bcca6b in __libc_start_main (main=0x804a2b0 <main>, argc=1, argv=0xbffff184, init=0x804e390 <__libc_csu_init>, fini=0x804e400 <__libc_csu_fini>, 
    rtld_fini=0xb7fedc90 <_dl_fini>, stack_end=0xbffff17c) at libc-start.c:321
#2  0x0804a31d in _start ()
(gdb)
 
thanks,
--jack




From: Chris Halls <halls@debian.org>
To: js <jshaio@yahoo.com>; 795131@bugs.debian.org
Sent: Monday, September 14, 2015 10:13 AM
Subject: Re: Bug#795131: segfault in libvclplug_gtk3lo.so to use gcc5 libraries

Hi there

Thanks for the report. Is it possible you have the same problem as bug
#798591, which is reproduced by a long click?

On 14/09/15 16:06, js wrote:
> My environment uses only xfce and does not have gnome components running. I have the xfce4-clipman
> (from xfce4-goodies package installed) but it was not running; no other clipboard manager is installed.

Intersting, thanks for that.

> These segfaults happened every few minutes when modifying a simple drawing with only a few
> rectangles on it, but I did not have a sequence to reproduce it. I was unable to make this
> happen with --backtrace on.

Could you try running libreoffice under gdb directly? Hopefully that
should return control to gdb when the crash occurs.

Thanks
Chris





warning: Currently logging to gdbtrace.log.  Turn the logging off and on to make the new setting effective.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1".
[New Thread 0xad8bdb40 (LWP 15221)]
[New Thread 0xac352b40 (LWP 15222)]
[New Thread 0xab9ffb40 (LWP 15223)]
[New Thread 0xaafa8b40 (LWP 15224)]
[New Thread 0xa8b64b40 (LWP 15227)]
[Thread 0xa8b64b40 (LWP 15227) exited]
[Thread 0xac352b40 (LWP 15222) exited]
[New Thread 0xac352b40 (LWP 15228)]
[New Thread 0xa8b64b40 (LWP 15229)]
[Thread 0xac352b40 (LWP 15228) exited]
[New Thread 0xac352b40 (LWP 15234)]
[Thread 0xac352b40 (LWP 15234) exited]
[New Thread 0xac352b40 (LWP 15235)]
[Thread 0xac352b40 (LWP 15235) exited]
[New Thread 0xac352b40 (LWP 15236)]
[Thread 0xac352b40 (LWP 15236) exited]
[New Thread 0xac352b40 (LWP 15237)]
[New Thread 0xa7c70b40 (LWP 15238)]
[Thread 0xa8b64b40 (LWP 15229) exited]
[New Thread 0xa8b64b40 (LWP 15239)]
[New Thread 0xa11a5b40 (LWP 15240)]
[Thread 0xac352b40 (LWP 15237) exited]
[New Thread 0xac352b40 (LWP 15241)]
[Thread 0xac352b40 (LWP 15241) exited]
[Thread 0xa11a5b40 (LWP 15240) exited]
[New Thread 0xa11a5b40 (LWP 15242)]
[Thread 0xa11a5b40 (LWP 15242) exited]
[New Thread 0xa11a5b40 (LWP 15243)]
[Thread 0xa11a5b40 (LWP 15243) exited]
[New Thread 0xa11a5b40 (LWP 15244)]
[Thread 0xa11a5b40 (LWP 15244) exited]
[New Thread 0xa11a5b40 (LWP 15245)]
[Thread 0xa11a5b40 (LWP 15245) exited]
[New Thread 0xa11a5b40 (LWP 15246)]
[Thread 0xa11a5b40 (LWP 15246) exited]
[New Thread 0xa11a5b40 (LWP 15247)]
[Thread 0xa11a5b40 (LWP 15247) exited]
[New Thread 0xa11a5b40 (LWP 15248)]
[Thread 0xa11a5b40 (LWP 15248) exited]
[New Thread 0xa11a5b40 (LWP 15249)]
[Thread 0xa11a5b40 (LWP 15249) exited]
[New Thread 0xa11a5b40 (LWP 15250)]
[Thread 0xa11a5b40 (LWP 15250) exited]
[New Thread 0xa11a5b40 (LWP 15251)]
[Thread 0xa11a5b40 (LWP 15251) exited]
[New Thread 0xa11a5b40 (LWP 15252)]
[New Thread 0xac352b40 (LWP 15253)]
[New Thread 0x9ebc5b40 (LWP 15254)]
[New Thread 0x9e3c4b40 (LWP 15255)]
[New Thread 0x9dbc3b40 (LWP 15256)]
[New Thread 0x9d3c2b40 (LWP 15257)]
[New Thread 0x9cbc1b40 (LWP 15258)]
[New Thread 0x9c3c0b40 (LWP 15259)]
[Thread 0xa11a5b40 (LWP 15252) exited]
[New Thread 0xa11a5b40 (LWP 15260)]
[Thread 0xa11a5b40 (LWP 15260) exited]
[Thread 0xa7c70b40 (LWP 15238) exited]
[Thread 0xab9ffb40 (LWP 15223) exited]
[Thread 0x9cbc1b40 (LWP 15258) exited]
[Thread 0x9d3c2b40 (LWP 15257) exited]
[Thread 0x9dbc3b40 (LWP 15256) exited]
[Thread 0x9e3c4b40 (LWP 15255) exited]
[Thread 0x9ebc5b40 (LWP 15254) exited]
[Thread 0xac352b40 (LWP 15253) exited]
[Thread 0xad8bdb40 (LWP 15221) exited]
[Thread 0x9c3c0b40 (LWP 15259) exited]
[Thread 0xaafa8b40 (LWP 15224) exited]
[Thread 0xadac0900 (LWP 15216) exited]
[Inferior 1 (process 15216) exited normally]
/usr/lib/libreoffice/program/gdbtrace:9: Error in sourced command file:
No stack.
quit
warning: Currently logging to gdbtrace.log.  Turn the logging off and on to make the new setting effective.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1".
[New Thread 0xad8bdb40 (LWP 324)]
[New Thread 0xac73eb40 (LWP 325)]
[New Thread 0xabdffb40 (LWP 326)]
[New Thread 0xab3ffb40 (LWP 327)]
[New Thread 0xaa801b40 (LWP 328)]
[New Thread 0xa9eb3b40 (LWP 329)]
[New Thread 0xa8af7b40 (LWP 332)]
[New Thread 0xa80ffb40 (LWP 333)]
[Thread 0xa80ffb40 (LWP 333) exited]
[New Thread 0xa80ffb40 (LWP 334)]
[Thread 0xa80ffb40 (LWP 334) exited]
[Thread 0xac73eb40 (LWP 325) exited]
[New Thread 0xac73eb40 (LWP 335)]
[Thread 0xac73eb40 (LWP 335) exited]
[New Thread 0xac73eb40 (LWP 336)]
[Thread 0xac73eb40 (LWP 336) exited]
[New Thread 0xac73eb40 (LWP 337)]
[New Thread 0xa80ffb40 (LWP 338)]
[Thread 0xa8af7b40 (LWP 332) exited]
[New Thread 0xa8af7b40 (LWP 339)]
[New Thread 0xa6fe5b40 (LWP 340)]
[Thread 0xac73eb40 (LWP 337) exited]
[New Thread 0xac73eb40 (LWP 341)]
[Thread 0xac73eb40 (LWP 341) exited]
[New Thread 0xac73eb40 (LWP 343)]
[Thread 0xac73eb40 (LWP 343) exited]
[Thread 0xa6fe5b40 (LWP 340) exited]
[New Thread 0xa6fe5b40 (LWP 344)]
[New Thread 0xac73eb40 (LWP 345)]
[Thread 0xa6fe5b40 (LWP 344) exited]
[Thread 0xac73eb40 (LWP 345) exited]
[New Thread 0xac73eb40 (LWP 346)]
[Thread 0xac73eb40 (LWP 346) exited]
[New Thread 0xac73eb40 (LWP 347)]
[Thread 0xac73eb40 (LWP 347) exited]
[New Thread 0xac73eb40 (LWP 348)]
[Thread 0xac73eb40 (LWP 348) exited]
[New Thread 0xac73eb40 (LWP 349)]
[Thread 0xac73eb40 (LWP 349) exited]
[New Thread 0xac73eb40 (LWP 350)]
[Thread 0xac73eb40 (LWP 350) exited]
[New Thread 0xac73eb40 (LWP 351)]
[Thread 0xac73eb40 (LWP 351) exited]
[New Thread 0xac73eb40 (LWP 352)]
[Thread 0xac73eb40 (LWP 352) exited]
[New Thread 0xac73eb40 (LWP 353)]
[Thread 0xac73eb40 (LWP 353) exited]
[New Thread 0xac73eb40 (LWP 354)]
[Thread 0xac73eb40 (LWP 354) exited]
[New Thread 0xac73eb40 (LWP 355)]
[New Thread 0xa6fe5b40 (LWP 356)]
[New Thread 0xa60c5b40 (LWP 357)]
[New Thread 0xa56ffb40 (LWP 358)]
[New Thread 0xa4cffb40 (LWP 359)]
[New Thread 0xa42ffb40 (LWP 360)]
[New Thread 0xa3afeb40 (LWP 361)]
[New Thread 0xa32fdb40 (LWP 362)]
[Thread 0xac73eb40 (LWP 355) exited]
[New Thread 0xac73eb40 (LWP 363)]
[Thread 0xac73eb40 (LWP 363) exited]
[New Thread 0xac73eb40 (LWP 364)]
[New Thread 0xa2afcb40 (LWP 365)]
[Thread 0xac73eb40 (LWP 364) exited]
[Thread 0xa2afcb40 (LWP 365) exited]
[Thread 0xa32fdb40 (LWP 362) exited]
[New Thread 0xa32fdb40 (LWP 366)]
[Thread 0xa32fdb40 (LWP 366) exited]
[New Thread 0xa32fdb40 (LWP 367)]
[Thread 0xa32fdb40 (LWP 367) exited]
[New Thread 0xa32fdb40 (LWP 368)]
[Thread 0xa32fdb40 (LWP 368) exited]
[New Thread 0xa32fdb40 (LWP 369)]
[Thread 0xa32fdb40 (LWP 369) exited]
[New Thread 0xa32fdb40 (LWP 370)]
[Thread 0xa32fdb40 (LWP 370) exited]
[New Thread 0xa32fdb40 (LWP 372)]
[New Thread 0xa2afcb40 (LWP 373)]
[Thread 0xa32fdb40 (LWP 372) exited]
[New Thread 0xa32fdb40 (LWP 375)]
[Thread 0xa32fdb40 (LWP 375) exited]
[Thread 0xa2afcb40 (LWP 373) exited]
[New Thread 0xa2afcb40 (LWP 376)]
[New Thread 0xa32fdb40 (LWP 377)]
[Thread 0xa9eb3b40 (LWP 329) exited]
[Thread 0xa2afcb40 (LWP 376) exited]
[New Thread 0xa2afcb40 (LWP 378)]
[Thread 0xa2afcb40 (LWP 378) exited]
[Thread 0xa80ffb40 (LWP 338) exited]
[Thread 0xabdffb40 (LWP 326) exited]
[Thread 0xaa801b40 (LWP 328) exited]
[Thread 0xa3afeb40 (LWP 361) exited]
[Thread 0xa42ffb40 (LWP 360) exited]
[Thread 0xa4cffb40 (LWP 359) exited]
[Thread 0xa56ffb40 (LWP 358) exited]
[Thread 0xa60c5b40 (LWP 357) exited]
[Thread 0xa6fe5b40 (LWP 356) exited]
[Thread 0xad8bdb40 (LWP 324) exited]
[Thread 0xa32fdb40 (LWP 377) exited]
[Thread 0xa8af7b40 (LWP 339) exited]
[Thread 0xadac0900 (LWP 319) exited]
[Inferior 1 (process 319) exited normally]
/usr/lib/libreoffice/program/gdbtrace:9: Error in sourced command file:
No stack.
warning: Currently logging to gdbtrace.log.  Turn the logging off and on to make the new setting effective.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1".
[New Thread 0xad8bdb40 (LWP 1755)]
[New Thread 0xac352b40 (LWP 1756)]
[New Thread 0xab9ffb40 (LWP 1757)]
[New Thread 0xaafa8b40 (LWP 1758)]
[New Thread 0xa8b64b40 (LWP 1761)]
[Thread 0xa8b64b40 (LWP 1761) exited]
[Thread 0xac352b40 (LWP 1756) exited]
[New Thread 0xac352b40 (LWP 1762)]
[Thread 0xac352b40 (LWP 1762) exited]
[New Thread 0xac352b40 (LWP 1763)]
[New Thread 0xa8b64b40 (LWP 1764)]
[Thread 0xa8b64b40 (LWP 1764) exited]
[New Thread 0xa8b64b40 (LWP 1765)]
[Thread 0xa8b64b40 (LWP 1765) exited]
[New Thread 0xa8b64b40 (LWP 1766)]
[Thread 0xa8b64b40 (LWP 1766) exited]
[New Thread 0xa8b64b40 (LWP 1767)]
[New Thread 0xa6138b40 (LWP 1768)]
[Thread 0xac352b40 (LWP 1763) exited]
[Thread 0xa8b64b40 (LWP 1767) exited]
[New Thread 0xa8b64b40 (LWP 1769)]
[Thread 0xa8b64b40 (LWP 1769) exited]

Program received signal SIGSEGV, Segmentation fault.
GtkSalFrame::gestureLongPress (gesture=0x8997ad0, frame=0x0) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/window/../../gtk/window/gtksalframe.cxx:3552
3552	/build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/window/../../gtk/window/gtksalframe.cxx: No such file or directory.
#0  GtkSalFrame::gestureLongPress (gesture=0x8997ad0, frame=0x0) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/window/../../gtk/window/gtksalframe.cxx:3552
#1  0xadf38d72 in ffi_call_SYSV () from /usr/lib/i386-linux-gnu/libffi.so.6
#2  0xadf389ec in ffi_call () from /usr/lib/i386-linux-gnu/libffi.so.6
#3  0xb2d1841d in g_cclosure_marshal_generic_va () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#4  0xb2d17abf in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#5  0xb2d318d9 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#6  0xb2d321b5 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#7  0xac98a7ac in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0
#8  0xac714dfc in ?? () from /usr/lib/i386-linux-gnu/libgdk-3.so.0
#9  0xb2c29a21 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#10 0xb2c28e03 in g_main_context_dispatch () from /lib/i386-linux-gnu/libglib-2.0.so.0
#11 0xb2c29219 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#12 0xb2c292e6 in g_main_context_iteration () from /lib/i386-linux-gnu/libglib-2.0.so.0
#13 0xacfe68fa in GtkData::Yield (this=0x80d8278, bWait=true, bHandleAllCurrentEvents=false) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/app/../../gtk/app/gtkdata.cxx:596
#14 0xacfe7bf0 in GtkInstance::Yield (this=0x80d81e0, bWait=true, bHandleAllCurrentEvents=false) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/app/../../gtk/app/gtkinst.cxx:407
#15 0xb696fdb5 in ImplYield (i_bAllEvents=false, i_bWait=true) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:353
#16 Application::Yield () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:382
#17 0xb696fe55 in Application::Execute () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:336
#18 0xb59876af in desktop::Desktop::Main (this=0xbffff038) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/app.cxx:1605
#19 0xb69759bb in ImplSVMain () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svmain.cxx:162
#20 0xb6975a29 in SVMain () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svmain.cxx:196
#21 0xb59a7730 in soffice_main () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/sofficemain.cxx:96
#22 0x0804857d in sal_main () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/main.c:48
#23 main (argc=2, argv=0xbffff174) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/main.c:47

Thread 13 (Thread 0xa6138b40 (LWP 1768)):
#0  0xb7fdcd3c in __kernel_vsyscall ()
#1  0xb3a78c4b in pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:187
#2  0xb3fa91bc in __pthread_cond_wait (cond=0xa85c400, mutex=0xa85c430) at forward.c:149
#3  0xb40e2f5a in osl_waitCondition (Condition=0xa85c400, pTimeout=0x0) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/osl/unx/conditn.cxx:228
#4  0xb5454209 in osl::Condition::wait (pTimeout=0x0, this=0x353d4) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/include/osl/conditn.hxx:80
#5  GrammarCheckingIterator::DequeueAndCheck (this=0xa85b270) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/linguistic/source/gciterator.cxx:647
#6  0xb40f3409 in osl_thread_start_Impl (pData=0x8811588) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/osl/unx/thread.cxx:240
#7  0xb3a74efb in start_thread (arg=0xa6138b40) at pthread_create.c:309
#8  0xb3f9c62e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:129

Thread 5 (Thread 0xaafa8b40 (LWP 1758)):
#0  0xb7fdcd3c in __kernel_vsyscall ()
#1  0xb3f91deb in poll () at ../sysdeps/unix/syscall-template.S:81
#2  0xb2c38350 in g_poll () from /lib/i386-linux-gnu/libglib-2.0.so.0
#3  0xb2c291a4 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#4  0xb2c295c9 in g_main_loop_run () from /lib/i386-linux-gnu/libglib-2.0.so.0
#5  0xb2e45565 in ?? () from /usr/lib/i386-linux-gnu/libgio-2.0.so.0
#6  0xb2c5071a in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#7  0xb3a74efb in start_thread (arg=0xaafa8b40) at pthread_create.c:309
#8  0xb3f9c62e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:129

Thread 4 (Thread 0xab9ffb40 (LWP 1757)):
#0  0xb7fdcd3c in __kernel_vsyscall ()
#1  0xb3f9d998 in accept () at ../sysdeps/unix/sysv/linux/i386/socket.S:95
#2  0xb40ea79b in osl_acceptPipe (pPipe=0x881ac60) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/osl/unx/pipe.cxx:428
#3  0xb59a3b65 in osl::Pipe::accept (Connection=..., this=0x8819794) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/include/osl/pipe.hxx:132
#4  desktop::OfficeIPCThread::execute (this=0x8819780) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/officeipcthread.cxx:718
#5  0xb244a006 in salhelper::Thread::run (this=0x8819780) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/salhelper/source/thread.cxx:40
#6  0xb244a25e in osl::threadFunc (param=0x8819788) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/include/osl/thread.hxx:184
#7  0xb40f3409 in osl_thread_start_Impl (pData=0x8819a60) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/osl/unx/thread.cxx:240
#8  0xb3a74efb in start_thread (arg=0xab9ffb40) at pthread_create.c:309
#9  0xb3f9c62e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:129

Thread 2 (Thread 0xad8bdb40 (LWP 1755)):
#0  0xb7fdcd3c in __kernel_vsyscall ()
#1  0xb3a79015 in pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_timedwait.S:245
#2  0xb3fa9214 in __pthread_cond_timedwait (cond=0xb41100e0 <g_cache_list+352>, mutex=0xb410ff80 <g_cache_list>, abstime=0xad8bd134) at forward.c:162
#3  0xb40ca078 in rtl_cache_wsupdate_wait (seconds=10) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/rtl/alloc_cache.cxx:1361
#4  rtl_cache_wsupdate_all (arg=0xa) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/sal/rtl/alloc_cache.cxx:1509
#5  0xb3a74efb in start_thread (arg=0xad8bdb40) at pthread_create.c:309
#6  0xb3f9c62e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:129

Thread 1 (Thread 0xadac0900 (LWP 1750)):
#0  GtkSalFrame::gestureLongPress (gesture=0x8997ad0, frame=0x0) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/window/../../gtk/window/gtksalframe.cxx:3552
#1  0xadf38d72 in ffi_call_SYSV () from /usr/lib/i386-linux-gnu/libffi.so.6
#2  0xadf389ec in ffi_call () from /usr/lib/i386-linux-gnu/libffi.so.6
#3  0xb2d1841d in g_cclosure_marshal_generic_va () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#4  0xb2d17abf in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#5  0xb2d318d9 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#6  0xb2d321b5 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0
#7  0xac98a7ac in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0
#8  0xac714dfc in ?? () from /usr/lib/i386-linux-gnu/libgdk-3.so.0
#9  0xb2c29a21 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#10 0xb2c28e03 in g_main_context_dispatch () from /lib/i386-linux-gnu/libglib-2.0.so.0
#11 0xb2c29219 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0
#12 0xb2c292e6 in g_main_context_iteration () from /lib/i386-linux-gnu/libglib-2.0.so.0
#13 0xacfe68fa in GtkData::Yield (this=0x80d8278, bWait=true, bHandleAllCurrentEvents=false) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/app/../../gtk/app/gtkdata.cxx:596
#14 0xacfe7bf0 in GtkInstance::Yield (this=0x80d81e0, bWait=true, bHandleAllCurrentEvents=false) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/unx/gtk3/app/../../gtk/app/gtkinst.cxx:407
#15 0xb696fdb5 in ImplYield (i_bAllEvents=false, i_bWait=true) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:353
#16 Application::Yield () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:382
#17 0xb696fe55 in Application::Execute () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svapp.cxx:336
#18 0xb59876af in desktop::Desktop::Main (this=0xbffff038) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/app.cxx:1605
#19 0xb69759bb in ImplSVMain () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svmain.cxx:162
#20 0xb6975a29 in SVMain () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/vcl/source/app/svmain.cxx:196
#21 0xb59a7730 in soffice_main () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/sofficemain.cxx:96
#22 0x0804857d in sal_main () at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/main.c:48
#23 main (argc=2, argv=0xbffff174) at /build/libreoffice-U8a4ZQ/libreoffice-5.0.1/desktop/source/app/main.c:47
A debugging session is active.

	Inferior 1 [process 1750] will be killed.

Quit anyway? (y or n) [answered Y; input not from terminal]

Reply to: