Re:Re: SOM

["Rodrigo" <r_marchi@zaz.com.br>]

oi.... esse manual eu usei em totas as distribuições baseadas em Red Hat e
em todas funcionarão, minha placa eh a 8330 (isa), e so pra dizer q o manual
naum funciona acontece q eu consigo configurar tudo beleza so q quando eu
vou tocar uma mp3 ele simplesmente fica repetindo o primeiro segundo da
musica, isso acontece com qualquer arquivo wav, mid.....
muito estranho.....
;]
Sent: Thursday, October 05, 2000 3:23 PM
Subject: Re: SOM


> Fala Rodrigo,
> o tutorial que voce ta usando é pra 8330 (q é ISA).
> A sua placa é 8338 ou 8330?
> Um abraço, PH
> >
> > oi pessoal eu to curtindo o debian pacas.... eu costumava usar o red hat
por
> > isso tem algumas coisas q eu costumva fazer q estão dificeis de serem
> > adaptada
> > por exemplo o som eu sempre usei o manual do kernel mais naum esta dando
> > certo no debian potato aqui esta o manual q vem com o kernel:
> >
> >
> > How to enable CMI 8330 (SOUNDPRO) soundchip on Linux
> > ------------------------------------------
> > Stefan Laudat <Stefan.Laudat@asit.ro>
> >
> > [Note: The CMI 8338 is unrelated and right now unsupported]
> >
> >
> >  In order to use CMI8330 under Linux  you just have to use a proper
> > isapnp.conf, a good isapnp and a little bit of patience.  I use isapnp
1.17,
> > but
> > you may get a better one I guess at
> > http://www.roestock.demon.co.uk/isapnptools/.
> >
> >  Of course you will have to compile kernel sound support as module, as
shown
> > below:
> >
> > CONFIG_SOUND=m
> > CONFIG_SOUND_OSS=m
> > CONFIG_SOUND_SB=m
> > CONFIG_SOUND_ADLIB=m
> > CONFIG_SOUND_MPU401=m
> > # Mikro$chaft sound system (kinda useful here ;))
> > CONFIG_SOUND_MSS=m
> >
> >  The /etc/isapnp.conf file will be:
> >
> > <snip below>
> >
> >
> > (READPORT 0x0203)
> > (ISOLATE PRESERVE)
> > (IDENTIFY *)
> > (VERBOSITY 2)
> > (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
> > (VERIFYLD N)
> >
> >
> > # WSS
> >
> > (CONFIGURE CMI0001/16777472 (LD 0
> > (IO 0 (SIZE 8) (BASE 0x0530))
> > (IO 1 (SIZE 8) (BASE 0x0388))
> > (INT 0 (IRQ 7 (MODE +E)))
> > (DMA 0 (CHANNEL 0))
> > (NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}")
> > (ACT Y)
> > ))
> >
> > # MPU
> >
> > (CONFIGURE CMI0001/16777472 (LD 1
> > (IO 0 (SIZE 2) (BASE 0x0330))
> > (INT 0 (IRQ 11 (MODE +E)))
> > (NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}")
> > (ACT Y)
> > ))
> >
> > # Joystick
> >
> > (CONFIGURE CMI0001/16777472 (LD 2
> > (IO 0 (SIZE 8) (BASE 0x0200))
> > (NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}")
> > (ACT Y)
> > ))
> >
> > # SoundBlaster
> >
> > (CONFIGURE CMI0001/16777472 (LD 3
> > (IO 0 (SIZE 16) (BASE 0x0220))
> > (INT 0 (IRQ 5 (MODE +E)))
> > (DMA 0 (CHANNEL 1))
> > (DMA 1 (CHANNEL 5))
> > (NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
> > (ACT Y)
> > ))
> >
> >
> > (WAITFORKEY)
> >
> > <end of snip>
> >
> >  The module sequence is trivial:
> >
> > /sbin/insmod soundcore
> > /sbin/insmod sound
> > /sbin/insmod uart401
> > # insert this first
> > /sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1
> > # The sb module is an alternative to the ad1848 (Microsoft Sound System)
> > # Anyhow, this is full duplex and has MIDI
> > /sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330
> >
> >
> >
> > Alma Chao <elysian@ethereal.torsion.org> suggests the following
> > /etc/conf.modules:
> >
> > alias sound ad1848
> > alias synth0 opl3
> > options ad1848 io=0x530 irq=7 dma=0 soundpro=1
> > options opl3 io=0x388
> >
> >
> >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-news-portuguese-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
> >
> >
>
>
> --
> To UNSUBSCRIBE, email to debian-news-portuguese-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>