Re: SOM

[Paulo Henrique Baptista de Oliveira <baptista@linuxsolutions.com.br>]

	Fala Rodrigo,
	o tutorial que voce ta usando é pra 8330 (q é ISA).
	A sua placa é 8338 ou 8330?
	Um abraço,		PH
> 
> oi pessoal eu to curtindo o debian pacas.... eu costumava usar o red hat por
> isso tem algumas coisas q eu costumva fazer q estão dificeis de serem
> adaptada
> por exemplo o som eu sempre usei o manual do kernel mais naum esta dando
> certo no debian potato aqui esta o manual q vem com o kernel:
> 
> 
> How to enable CMI 8330 (SOUNDPRO) soundchip on Linux
> ------------------------------------------
> Stefan Laudat <Stefan.Laudat@asit.ro>
> 
> [Note: The CMI 8338 is unrelated and right now unsupported]
> 
> 
>  In order to use CMI8330 under Linux  you just have to use a proper
> isapnp.conf, a good isapnp and a little bit of patience.  I use isapnp 1.17,
> but
> you may get a better one I guess at
> http://www.roestock.demon.co.uk/isapnptools/.
> 
>  Of course you will have to compile kernel sound support as module, as shown
> below:
> 
> CONFIG_SOUND=m
> CONFIG_SOUND_OSS=m
> CONFIG_SOUND_SB=m
> CONFIG_SOUND_ADLIB=m
> CONFIG_SOUND_MPU401=m
> # Mikro$chaft sound system (kinda useful here ;))
> CONFIG_SOUND_MSS=m
> 
>  The /etc/isapnp.conf file will be:
> 
> <snip below>
> 
> 
> (READPORT 0x0203)
> (ISOLATE PRESERVE)
> (IDENTIFY *)
> (VERBOSITY 2)
> (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
> (VERIFYLD N)
> 
> 
> # WSS
> 
> (CONFIGURE CMI0001/16777472 (LD 0
> (IO 0 (SIZE 8) (BASE 0x0530))
> (IO 1 (SIZE 8) (BASE 0x0388))
> (INT 0 (IRQ 7 (MODE +E)))
> (DMA 0 (CHANNEL 0))
> (NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}")
> (ACT Y)
> ))
> 
> # MPU
> 
> (CONFIGURE CMI0001/16777472 (LD 1
> (IO 0 (SIZE 2) (BASE 0x0330))
> (INT 0 (IRQ 11 (MODE +E)))
> (NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}")
> (ACT Y)
> ))
> 
> # Joystick
> 
> (CONFIGURE CMI0001/16777472 (LD 2
> (IO 0 (SIZE 8) (BASE 0x0200))
> (NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}")
> (ACT Y)
> ))
> 
> # SoundBlaster
> 
> (CONFIGURE CMI0001/16777472 (LD 3
> (IO 0 (SIZE 16) (BASE 0x0220))
> (INT 0 (IRQ 5 (MODE +E)))
> (DMA 0 (CHANNEL 1))
> (DMA 1 (CHANNEL 5))
> (NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
> (ACT Y)
> ))
> 
> 
> (WAITFORKEY)
> 
> <end of snip>
> 
>  The module sequence is trivial:
> 
> /sbin/insmod soundcore
> /sbin/insmod sound
> /sbin/insmod uart401
> # insert this first
> /sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1
> # The sb module is an alternative to the ad1848 (Microsoft Sound System)
> # Anyhow, this is full duplex and has MIDI
> /sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330
> 
> 
> 
> Alma Chao <elysian@ethereal.torsion.org> suggests the following
> /etc/conf.modules:
> 
> alias sound ad1848
> alias synth0 opl3
> options ad1848 io=0x530 irq=7 dma=0 soundpro=1
> options opl3 io=0x388
> 
> 
> 
> 
> 
> --  
> To UNSUBSCRIBE, email to debian-news-portuguese-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> 
>