Re: Soundblaster Audigy, it's almost working...
Probably better off on alsa lists (alsa-project from memory, or google
for it), since volume here is pretty low (as you might've discovered),
and (so far at least) geared more toward packaging issues. I have only
a maestro3 chip in my laptop sorry, can't help you there myself. alsa
lists are very! active though...
cheers
zenaan
On Sun, 2003-11-02 at 21:42, Raoul wrote:
> Hello all,
>
> Ever since I'm using Debian (woody, kernel 2.4.18) on my new computer I
> have not been able to use my soundcard which is a Soundblaster Audigy.
> After many days of reading online postings, FAQ, HOWTO, etc etc I
> have come very close.
>
> A few sources I used:
>
> http://sourceforge.net/projects/emu10k1
> http://basic-rip.co.uk/tenpin/linux_audigy_faq.html and ofcourse a lot of
> Google-ing.
>
> During boottime it clearly says that an Audigy soundcard has been
> detected (see dmesg below) so this makes me happy :-) Although it is strange
> that the lspci output isn't so sure about the device.
>
> After login to KDE 3.1 when I have XMMS play an MP3 file it almost seems ok
> (btw it uses aRts driver 0.4). I can see the 'visuals' in XMMS show the
> song that's playing, but still no sound :-( Now, this must be something
> like a mute button, or something very simple. However when I look with KMix
> all channels are open.... I must be so close to the solution, so I don't
> want to give up now ;-)
>
> Does anyone have some clue where to look? I can't be the only one with
> Debian and an Audigy card I guess ;-) Should moving to alsa solve all my
> problems? This would imply a kernel upgrade, and maybe other implications.
>
> Many thanks in advance for any help.
>
> Greetings,
> Raoul
>
>
> My dmesg and lspci output are added below:
>
> Linux version 2.4.18-kmr1.0 (root@kramer) (gcc version 2.95.4 20011002
> (Debian prerelease)) #1 Sat Jul 26 21:34:31 CEST 2003
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 127MB HIGHMEM available.
> found SMP MP-table at 000fba20
> hm, page 000fb000 reserved twice.
> hm, page 000fc000 reserved twice.
> hm, page 000f5000 reserved twice.
> hm, page 000f6000 reserved twice.
> On node 0 totalpages: 262128
> zone(0): 4096 pages.
> zone(1): 225280 pages.
> zone(2): 32752 pages.
> Intel MultiProcessor Specification v1.4
> Virtual Wire compatibility mode.
> OEM ID: INTEL Product ID: I845G APIC at: 0xFEE00000
> Processor #0 Unknown CPU [15:2] APIC version 20
> I/O APIC #2 Version 32 at 0xFEC00000.
> Processors: 1
> Kernel command line: BOOT_IMAGE=Linux ro root=305 hdc=ide-scsi
> ide_setup: hdc=ide-scsi
> Initializing CPU#0
> Detected 2405.541 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 4797.23 BogoMIPS
> Memory: 1029544k/1048512k available (1278k kernel code, 18580k reserved,
> 354k data, 228k init, 131008k highmem)
> Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
> Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
> CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
> CPU: Common caps: bfebfbff 00000000 00000000 00000000
> CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> ENABLING IO-APIC IRQs
> Setting 2 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 2 ... ok.
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-20, 2-21, 2-22 not connected.
> ..TIMER: vector=0x31 pin1=2 pin2=0
> number of MP IRQ sources: 24.
> number of IO-APIC #2 registers: 24.
> testing the IO APIC.......................
>
> IO APIC #2......
> .... register #00: 02000000
> ....... : physical APIC id: 02
> .... register #01: 00178020
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 1
> ....... : IO APIC version: 0020
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 001 01 0 0 0 0 0 1 1 39
> 02 001 01 0 0 0 0 0 1 1 31
> 03 001 01 0 0 0 0 0 1 1 41
> 04 001 01 0 0 0 0 0 1 1 49
> 05 001 01 0 0 0 0 0 1 1 51
> 06 001 01 0 0 0 0 0 1 1 59
> 07 001 01 0 0 0 0 0 1 1 61
> 08 001 01 0 0 0 0 0 1 1 69
> 09 001 01 0 0 0 0 0 1 1 71
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 001 01 0 0 0 0 0 1 1 79
> 0d 001 01 0 0 0 0 0 1 1 81
> 0e 001 01 0 0 0 0 0 1 1 89
> 0f 001 01 0 0 0 0 0 1 1 91
> 10 001 01 1 1 0 1 0 1 1 99
> 11 001 01 1 1 0 1 0 1 1 A1
> 12 001 01 1 1 0 1 0 1 1 A9
> 13 001 01 1 1 0 1 0 1 1 B1
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 001 01 1 1 0 1 0 1 1 B9
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ16 -> 0:16
> IRQ17 -> 0:17
> IRQ18 -> 0:18
> IRQ19 -> 0:19
> IRQ23 -> 0:23
> .................................... done.
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 2405.4875 MHz.
> ..... host bus clock speed is 133.6380 MHz.
> cpu: 0, clocks: 1336380, slice: 668190
> CPU0<T0:1336368,T1:668176,D:2,S:668190,C:1336380>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> Unknown bridge resource 2: assuming transparent
> PCI: Using IRQ router default [8086/24c0] at 00:1f.0
> PCI->APIC IRQ transform: (B0,I29,P0) -> 16
> PCI->APIC IRQ transform: (B0,I29,P1) -> 19
> PCI->APIC IRQ transform: (B0,I29,P2) -> 18
> PCI->APIC IRQ transform: (B0,I29,P3) -> 23
> PCI->APIC IRQ transform: (B0,I31,P0) -> 18
> PCI->APIC IRQ transform: (B0,I31,P1) -> 18
> PCI->APIC IRQ transform: (B1,I0,P0) -> 16
> PCI->APIC IRQ transform: (B2,I1,P0) -> 17
> PCI->APIC IRQ transform: (B2,I2,P0) -> 18
> PCI->APIC IRQ transform: (B2,I2,P1) -> 19
> PCI->APIC IRQ transform: (B2,I5,P0) -> 17
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> allocated 32 pages and 32 bhs reserved for the highmem bounces
> VFS: Diskquotas version dquot_6.4.0 initialized
> Journalled Block Device driver loaded
> NTFS driver v1.1.22 [Flags: R/O]
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 128 slots per queue, batch=32
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb
> PCI: Device 00:1f.1 not available because of resource collisions
> PCI_IDE: chipset revision 2
> PCI_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
> hda: Maxtor 6Y120P0, ATA DISK drive
> hdb: Maxtor 6Y120P0, ATA DISK drive
> hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63
> hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63
> ide-floppy driver 0.97.sv
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 >
> hdb: hdb1 hdb2
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> loop: loaded (max 8 devices)
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 02:01.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xd800. Vers LK1.1.16
> ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
> http://www.scyld.com/network/ne2k-pci.html
> eth1: RealTek RTL-8029 found at 0xd000, IRQ 17, 00:40:F4:70:FA:E4.
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 816M
> agpgart: Unsupported Intel chipset (device id: 2560), you might want to try
> agp_try_unsupported=1.
> agpgart: no supported devices found.
> ide-floppy driver 0.97.sv
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: PLEXTOR Model: CD-R PX-W4824A Rev: 1.03
> Type: CD-ROM ANSI SCSI revision: 02
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.12
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 8192 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 65536)
> ip_conntrack (8191 buckets, 65528 max)
> ip_tables: (C) 2000-2002 Netfilter core team
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 228k freed
> Adding Swap: 1534168k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 21:40:31 Jul 26 2003
> usb-uhci.c: High bandwidth mode enabled
> PCI: Setting latency timer of device 00:1d.0 to 64
> usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 16
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Setting latency timer of device 00:1d.1 to 64
> usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 19
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Setting latency timer of device 00:1d.2 to 64
> usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 18
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 3
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> hub.c: USB new device connect on bus3/2, assigned device number 2
> hub.c: USB hub found
> hub.c: 4 ports detected
> 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed
> Jul 16 19:03:09 PDT 2003
> Creative EMU10K1 PCI Audio Driver, version 0.20a, 13:54:31 Sep 6 2003
> emu10k1: Audigy rev 4 model 0x1002 found, IO at 0xd400-0xd43f, IRQ 18
> ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,66), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> eth0: Setting promiscuous mode.
> device eth0 entered promiscuous mode
> 0: NVRM: AGPGART: unable to retrieve symbol table
> usb.c: USB disconnect on device 2
> device eth0 left promiscuous mode
> eth0: Setting promiscuous mode.
> device eth0 entered promiscuous mode
> hub.c: USB new device connect on bus3/2, assigned device number 3
> hub.c: USB hub found
> hub.c: 4 ports detected
>
>
> The lspci output:
> 00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03)
> 00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03)
> 00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02)
> 00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02)
> 00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02)
> 00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02)
> 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82)
> 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
> 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02)
> 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
> 01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0281
> (rev a1)
> 02:01.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
> (rev 04)
> 02:02.0 Multimedia audio controller: Creative Labs: Unknown device 0004 (rev
> 04)
> 02:02.1 Input device controller: Creative Labs: Unknown device 7003 (rev 04)
> 02:02.2 FireWire (IEEE 1394): Creative Labs: Unknown device 4001 (rev 04)
> 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
--
Mr Zenaan Harkness
Phone +61 (0)412 166 990
Please respect the confidentiality of this email.
Reply to: