Soundblaster Audigy, it's almost working...
Hello all,
Ever since I'm using Debian (woody, kernel 2.4.18) on my new computer I
have not been able to use my soundcard which is a Soundblaster Audigy.
After many days of reading online postings, FAQ, HOWTO, etc etc I
have come very close.
A few sources I used:
http://sourceforge.net/projects/emu10k1
http://basic-rip.co.uk/tenpin/linux_audigy_faq.html and ofcourse a lot of
Google-ing.
During boottime it clearly says that an Audigy soundcard has been
detected (see dmesg below) so this makes me happy :-) Although it is strange
that the lspci output isn't so sure about the device.
After login to KDE 3.1 when I have XMMS play an MP3 file it almost seems ok
(btw it uses aRts driver 0.4). I can see the 'visuals' in XMMS show the
song that's playing, but still no sound :-( Now, this must be something
like a mute button, or something very simple. However when I look with KMix
all channels are open.... I must be so close to the solution, so I don't
want to give up now ;-)
Does anyone have some clue where to look? I can't be the only one with
Debian and an Audigy card I guess ;-) Should moving to alsa solve all my
problems? This would imply a kernel upgrade, and maybe other implications.
Many thanks in advance for any help.
Greetings,
Raoul
My dmesg and lspci output are added below:
Linux version 2.4.18-kmr1.0 (root@kramer) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Sat Jul 26 21:34:31 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
found SMP MP-table at 000fba20
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: I845G APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:2] APIC version 20
I/O APIC #2 Version 32 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Linux ro root=305 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2405.541 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4797.23 BogoMIPS
Memory: 1029544k/1048512k available (1278k kernel code, 18580k reserved,
354k data, 228k init, 131008k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-20, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 24.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 001 01 1 1 0 1 0 1 1 B1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2405.4875 MHz.
..... host bus clock speed is 133.6380 MHz.
cpu: 0, clocks: 1336380, slice: 668190
CPU0<T0:1336368,T1:668176,D:2,S:668190,C:1336380>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router default [8086/24c0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 17
PCI->APIC IRQ transform: (B2,I2,P0) -> 18
PCI->APIC IRQ transform: (B2,I2,P1) -> 19
PCI->APIC IRQ transform: (B2,I5,P0) -> 17
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
NTFS driver v1.1.22 [Flags: R/O]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: chipset revision 2
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: hdb1 hdb2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:01.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xd800. Vers LK1.1.16
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth1: RealTek RTL-8029 found at 0xd000, IRQ 17, 00:40:F4:70:FA:E4.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Unsupported Intel chipset (device id: 2560), you might want to try
agp_try_unsupported=1.
agpgart: no supported devices found.
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4824A Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack (8191 buckets, 65528 max)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding Swap: 1534168k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 21:40:31 Jul 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus3/2, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed
Jul 16 19:03:09 PDT 2003
Creative EMU10K1 PCI Audio Driver, version 0.20a, 13:54:31 Sep 6 2003
emu10k1: Audigy rev 4 model 0x1002 found, IO at 0xd400-0xd43f, IRQ 18
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
0: NVRM: AGPGART: unable to retrieve symbol table
usb.c: USB disconnect on device 2
device eth0 left promiscuous mode
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
hub.c: USB new device connect on bus3/2, assigned device number 3
hub.c: USB hub found
hub.c: 4 ports detected
The lspci output:
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03)
00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02)
00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02)
00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02)
00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02)
00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0281
(rev a1)
02:01.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
(rev 04)
02:02.0 Multimedia audio controller: Creative Labs: Unknown device 0004 (rev
04)
02:02.1 Input device controller: Creative Labs: Unknown device 7003 (rev 04)
02:02.2 FireWire (IEEE 1394): Creative Labs: Unknown device 4001 (rev 04)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Reply to: