[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: kernels for Loongson 3A



Hi,Andreas
   Please try this PMON, thanks.
   http://updates.lemote.com/pmon/pmon-A1004-2.0.8.bin



于 2013年07月25日 08:33, chenhc@lemote.com 写道:
> Hi, Qian and Chen
>
> Please see see, Andreas use http://dev.lemote.com/files/upload/lm/kernel
> /testing/pmon-A1004-2.1.3.bin on A1004 notebook but have boot failure.
>
>> * chenhc@lemote.com (chenhc@lemote.com) [130626 02:47]:
>>> I see that your PMON is *not* from lemote, and I think this is the root
>>> cause of boot failure. Please use this one, thanks.
>>> http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin
>>
>> Booting this ends up with:
>>  SuperIO RTC
>> Pull up GPIO15.
>> NODE 0 MEMORY CONFIG BEGIN
>>
>> Probing DDR SLOT: 00000000
>>
>> Set DDR frequency by software
>>
>> Enable register space of MEMORY
>> DDR Interleave space open : 0x00000000 - 0x0FFFFFFF
>> DDR Interleave using Bit 13
>> DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF
>> DDR Interleave using Bit 13
>> Disable register space of MEMORY
>> Disable cpu buffered read
>>
>> and stops there. Doesn't seem to be entirly right to me then.
>>
>> (whereas the output of the other one continues with
>>  SuperIO RTC
>>
>>  spd_info_store begain.
>>
>>  spd_info_store done.
>> Copy PMON to execute location...
>>   start = 0x81000000
>>   s0 = 0x3ec00000
>> 81080000
>> copy text section done.
>> Copy PMON to execute location done.
>> sp=80ffc000
>> Uncompressing
>> Bios....................................................................OK,Booting
>> Bios
>> memsz 2032
>> FREQ
>> RTC: 13-07-24 20:10:07
>> FREI
>> cpu fre 900000000
>> DONE
>> DEVI
>> init uhci cmd called
>> ENVI
>> MAPV
>> in envinit
>> )
>>
>>
>> Any hints for me?
>>
>>
>>
>> Regards,
>> Andi
>>
>
>


Reply to: