Re: New installer
On Tue, Sep 9, 2008 at 00:10, Gordon Farquharson
<gordonfarquharson@gmail.com> wrote:
> On Mon, Sep 8, 2008 at 23:19, Martin Michlmayr <tbm@cyrius.com> wrote:
>
>> Are you sure you didn't download the new image but then forgot to
>> update the file in /nfsroot? Or maybe you unpacked it as
>> /nfsroot/nfsroot accidentally (I've done that before ;)
>
> Yes, you are correct :-S I forgot to unpack the new image! Let me try again.
Here is the serial console output from the real daily image.
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Wed Mar 3 21:26:25 PST 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................0M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing \ done.
[ "CoLo" v1.22 ]
stage2: 83fa0000-84000000
cpu: clock 250.000MHz
pci: unit type <RaQ2>
tulip: #0 device 21143
tulip: {00:10:e0:00:42:60}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.1.70 <-- 192.168.1.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.1.70
netmask 255.255.255.0
gateway 192.168.1.1
name server 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> tftp {dhcp-next-server} {dhcp-boot-file}
1KB loaded
00000316 790t
1> -script
2> var args ""
2> select 'BOOT SELECTION' 50 'install SSH' 'install serial' 'rescue
SSH' 'rescue serial'
2> goto {menu-option}
2> var title1 'Starting the'
2> var title2 'installer (SSH)'
2> var initrd "ssh_initrd.gz"
2> goto 4
2> lcd "{title1}" "{title2}"
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.6.26-1-r5k-cobalt {initrd}
nfs: mounted "/nfsroot"
nfs: lookup "ssh_initrd.gz"
nfs: mode <0100644>
4111KB loaded (632KB/sec)
nfs: lookup "vmlinux-2.6.26-1-r5k-cobalt"
nfs: mode <0100644>
4218KB loaded (648KB/sec)
0041e727 4319015t
00403d51 4210001t
nfs: unmounted "/nfsroot"
2> relocate
elf32: 00080000 - 003ce44f (802dee60) (ffffffff.80000000)
2> execute rd_start=0x{initrd-start} rd_size=0x{initrd-size}
console=ttyS0,{console-speed} {args}
elf32: 00080000 - 003ce44f (802dee60) (ffffffff.80000000)
exec: relocating initrd (803cf000)
elf32: 80080000 (80080000) 3264646t + 201674t
net: interface down
[17179569.332000] Cobalt board ID: 6
[17179569.368000] NET: Registered protocol family 2
[17179569.412000] IP route cache hash table entries: 1024 (order: 0,
4096 bytes)[17179569.420000] TCP established hash table entries: 2048
(order: 2, 16384 bytes)
[17179569.432000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[17179569.436000] TCP: Hash tables configured (established 2048 bind 2048)
[17179569.444000] TCP reno registered
[17179569.460000] NET: Registered protocol family 1
[17179569.468000] checking if image is initramfs... it is
[17179574.912000] Freeing initrd memory: 4111k freed
[17179574.932000] audit: initializing netlink socket (disabled)
[17179574.940000] type=2000 audit(5.756:1): initialized
[17179574.948000] VFS: Disk quotas dquot_6.5.1
[17179574.952000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.964000] msgmni has been set to 119
[17179574.968000] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[17179574.980000] io scheduler noop registered
[17179574.984000] io scheduler anticipatory registered
[17179574.988000] io scheduler deadline registered
[17179574.992000] io scheduler cfq registered (default)
[17179575.000000] pci 0000:00:09.0: Activating ISA DMA hang workarounds
[17179575.108000] Cobalt LCD Driver v2.10
[17179575.112000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing disabled
�[17179575.152000] serial8250.0: ttyS0 at MMIO 0x1c800000 (irq = 21)
is a ST16650V2
[17179575.160000] console handover: boot [early0] -> real [ttyS0]
[17179575.220000] brd: module loaded
[17179575.228000] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[17179575.232000] PCI: Enabling device 0000:00:07.0 (0041 -> 0043)
[17179575.244000] tulip0: Old format EEPROM on 'Cobalt Microserver'
board. Using substitute media control info.
[17179575.256000] tulip0: EEPROM default media type Autosense.
[17179575.260000] tulip0: Index #0 - Media MII (#11) described by a
21142 MII PHY (3) block.
[17179575.272000] tulip0: MII transceiver #1 config 1000 status 7809
advertising 01e1.
[17179575.288000] eth0: Digital DS21142/43 Tulip rev 65 at MMIO
0x12040000, 00:10:e0:00:42:60, IRQ 19.
[17179575.300000] Uniform Multi-Platform E-IDE driver
[17179575.304000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[17179575.316000] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at
PCI slot 0000:00:09.1
[17179575.324000] VP_IDE: not 100% native mode: will probe irqs later
[17179575.332000] VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller
on pci0000:00:09.1
[17179575.340000] ide0: BM-DMA at 0x10a0-0x10a7
[17179575.344000] ide1: BM-DMA at 0x10a8-0x10af
[17179575.768000] hda: ST380021A, ATA DISK drive
[17179576.444000] hda: UDMA/33 mode selected
[17179577.012000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.016000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.028000] ide_generic: please use "probe_mask=0x3f" module
parameter for probing all legacy ISA IDE ports
[17179577.036000] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[17179577.044000] ide_generic: I/O resource 0x170-0x177 not free.
[17179577.052000] hda: max request size: 128KiB
[17179577.056000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=65535/16/63
[17179577.064000] hda: cache flushes not supported
[17179577.068000] hda: hda1 hda2 hda3 < hda5 >
[17179577.124000] physmap platform flash device: 00080000 at 1fc00000
modprobe: FATAL: Could not load
/lib/modules/2.6.26-1-r5k-cobalt/modules.dep: No such file or
directory
[17179577.188000] Found: AMD AM29F040
[17179577.192000] physmap-flash.0: Found 1 x8 devices at 0x0 in 8-bit bank
[17179577.200000] number of JEDEC chips: 1
[17179577.204000] cfi_cmdset_0002: Disabling erase-suspend-program due
to code brokenness.
modprobe: FATAL: Could not load
/lib/modules/2.6.26-1-r5k-cobalt/modules.dep: No such file or
directory
[17179577.268000] cmdlinepart partition parsing not available
modprobe: FATAL: Could not load
/lib/modules/2.6.26-1-r5k-cobalt/modules.dep: No such file or
directory
[17179577.332000] RedBoot partition parsing not available
[17179577.336000] Using physmap partition information
[17179577.344000] Creating 1 MTD partitions on "physmap-flash.0":
[17179577.348000] 0x00000000-0x00080000 : "firmware"
[17179577.360000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[17179577.368000] rtc0: alarms up to one day
[17179577.376000] Registered led device: raq-power-off
[17179577.380000] Registered led device: raq-web
[17179577.392000] TCP cubic registered
[17179577.396000] NET: Registered protocol family 17
[17179577.404000] registered taskstats version 1
[17179577.412000] rtc_cmos rtc_cmos: setting system clock to
2008-09-09 06:25:05 UTC (1220941505)
[17179577.424000] Freeing unused kernel memory: 156k freed
Starting system log daemon: syslogd, klogd.
--
Gordon Farquharson
GnuPG Key ID: 32D6D676
Reply to: