Re: New installer
Hi Martin
On Mon, Sep 8, 2008 at 03:10, Martin Michlmayr <tbm@cyrius.com> wrote:
> * wr35nn89 <wr35nn89@free.fr> [2008-09-07 15:06]:
>> {dhcp-root-path} {dhcp-boot-file}
>> nfs: mounted "/nfsroot"
>> nfs: lookup "default.colo"
>> nfs: mode <0100644>
>> 1KB loaded
>> 00000316 790t
>> no response
>
> This means that you were able to load CoLo via the network but then
> CoLo fails to download further files via the network. I don't have
> access to my Cobalt right now, so I cannot test whether CoLo works,
> but otoh it hasn't changed in months, so I'm not sure why it wouldn't
> work.
>
> Gordon or Thomas, can you try on your Cobalt?
The daily installer loads on the Cobalt RAQ2. The serial console
output is below.
The installer did fail with the following error message. This error
occurred for both testing and unstable.
--- [!!] Download installer components ---
No kernel modules were found. This probably is due to a mismatch
between the kernel used by this version of the installer and the
kernel version available in the archive.
If you're installing from a mirror, you can work around this problem
by choosing to install a different version of Debian. The install
will probably fail to work if you continue without kernel modules.
Continue the install without loading kernel modules?
<Go Back> <Yes> <No>
--- Serial console output ---
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Wed Mar 3 21:26:25 PST 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................0M
7.Bank 2:.................................0M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing \ done.
[ "CoLo" v1.22 ]
stage2: 83fa0000-84000000
cpu: clock 250.000MHz
pci: unit type <RaQ2>
tulip: #0 device 21143
tulip: {00:10:e0:00:42:60}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> net
tulip: link up (100Mbps full-duplex)
net: interface up
dhcp: DISCOVER
dhcp: OFFER 192.168.1.70 <-- 192.168.1.1
dhcp: REQUEST
dhcp: ACK
net: interface down
tulip: link up (100Mbps full-duplex)
net: interface up
address 192.168.1.70
netmask 255.255.255.0
gateway 192.168.1.1
name server 192.168.1.1
1> lcd 'Booting...' {ip-address}
1> tftp {dhcp-next-server} {dhcp-boot-file}
1KB loaded
00000316 790t
1> -script
2> var args ""
2> select 'BOOT SELECTION' 50 'install SSH' 'install serial' 'rescue
SSH' 'rescue serial'
2> goto {menu-option}
2> var title1 'Starting the'
2> var title2 'installer (SSH)'
2> var initrd "ssh_initrd.gz"
2> goto 4
2> lcd "{title1}" "{title2}"
2> nfs {dhcp-next-server} {dhcp-root-path} vmlinux-2.6.22-3-r5k-cobalt {initrd}
nfs: mounted "/nfsroot"
nfs: lookup "ssh_initrd.gz"
nfs: mode <0100644>
4829KB loaded (689KB/sec)
nfs: lookup "vmlinux-2.6.22-3-r5k-cobalt"
nfs: mode <0100644>
3674KB loaded (699KB/sec)
003968b8 3762360t
004b7457 4944983t
nfs: unmounted "/nfsroot"
2> relocate
elf32: 00080000 - 0036143f (80321000) (ffffffff.80000000)
2> execute rd_start=0x{initrd-start} rd_size=0x{initrd-size}
console=ttyS0,{console-speed} {args}
elf32: 00080000 - 0036143f (80321000) (ffffffff.80000000)
exec: relocating initrd (80362000)
elf32: 80080000 (80080000) 2879621t + 140219t
net: interface down
Linux version 2.6.22-3-r5k-cobalt (Debian 2.6.22-6) (maks@debian.org)
(gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Mon Nov
12 15:51:33 UTC 2007
CPU revision is: 000028a0
FPU revision is: 000028a0
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initial ramdisk at: 0x80362000 (4944983 bytes)
Built 1 zonelists. Total pages: 16256
Kernel command line: rd_start=0x80362000 rd_size=0x4b7457 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 56612k/65536k available (2189k kernel code, 8864k reserved,
498k data, 124k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
Cobalt board ID: 6
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4829k freed
audit: initializing netlink socket (disabled)
audit(946684801.948:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
�serial8250.0: ttyS0 at MMIO 0x1c800000 (irq = 21) is a ST16650V2
console handover: boot [early0] -> real [ttyS0]
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
PCI: Enabling device 0000:00:07.0 (0041 -> 0043)
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x12040000,
00:10:E0:00:42:60, IRQ 19.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
hda: ST380021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 >
physmap platform flash device: 00080000 at 1fc00000
Found: AMD AM29F040
physmap-flash.0: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 1 MTD partitions on "physmap-flash.0":
0x00000000-0x00080000 : "firmware"
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc_cmos rtc_cmos: setting the system clock to 2008-09-09 04:00:15 (1220932815)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Setting up filesystem, please wait ...
Starting system log daemon: syslogd, klogd.
--
Gordon Farquharson
GnuPG Key ID: 32D6D676
Reply to: