Re: Building library from source
Sorry attachment is here ...
sudo pbuilder build --buildresult /home/mira/BUILD/zc-results/ /home/mira/BUILD/zita-convolver/zita-convolver_1.0.0-1.dsc
W: /home/mira/.pbuilderrc does not exist
I: using fakeroot in build.
Current time: Thu Mar 19 03:37:28 CET 2009
pbuilder-time-stamp: 1237430248
Building the build Environment
-> extracting base tarball [/var/cache/pbuilder/base.tgz]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
-> mounting /dev/pts filesystem
-> policy-rc.d already exists
Obtaining the cached apt archive contents
Installing the build-deps
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: i386
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder and should
Depends: debhelper (>= 7), binutils, libfftw3-dev (>= 3.1.2-3.1), libc6-dev (>= 2.7), locales, quilt
dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Reading package lists... Done
Building dependency tree
Reading state information... Done
aptitude is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Selecting previously deselected package pbuilder-satisfydepends-dummy.
(Reading database ... 11740 files and directories currently installed.)
Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ...
dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy:
pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on libfftw3-dev (>= 3.1.2-3.1); however:
Package libfftw3-dev is not installed.
pbuilder-satisfydepends-dummy depends on locales; however:
Package locales is not installed.
pbuilder-satisfydepends-dummy depends on quilt; however:
Package quilt is not installed.
dpkg: error processing pbuilder-satisfydepends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pbuilder-satisfydepends-dummy
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
Reading task descriptions... Done
The following NEW packages will be installed:
debhelper{a} diffstat{a} file{a} gettext{a} gettext-base{a} html2text{a} intltool-debian{a} libcroco3{a} libfftw3-3{a} libfftw3-dev{a} libglib2.0-0{a} libmagic1{a} libpcre3{a}
libxml2{a} locales{a} po-debconf{a} quilt{a}
The following partially installed packages will be configured:
pbuilder-satisfydepends-dummy
The following packages are RECOMMENDED but will NOT be installed:
libcompress-zlib-perl libglib2.0-data libmail-box-perl libmail-sendmail-perl shared-mime-info xml-core
0 packages upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/13.6MB of archives. After unpacking 38.0MB will be used.
Writing extended state information... Done
Preconfiguring packages ...
Selecting previously deselected package libmagic1.
(Reading database ... 11740 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.26-2_i386.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.26-2_i386.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-13_i386.deb) ...
Selecting previously deselected package libpcre3.
Unpacking libpcre3 (from .../libpcre3_7.8-2_i386.deb) ...
Selecting previously deselected package libglib2.0-0.
Unpacking libglib2.0-0 (from .../libglib2.0-0_2.20.0-1_i386.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.3.dfsg-1_i386.deb) ...
Selecting previously deselected package libcroco3.
Unpacking libcroco3 (from .../libcroco3_0.6.1-2_i386.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.17-6_i386.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.17-6_i386.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.15_all.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_7.2.6_all.deb) ...
Selecting previously deselected package libfftw3-3.
Unpacking libfftw3-3 (from .../libfftw3-3_3.1.2-3.1_i386.deb) ...
Selecting previously deselected package libfftw3-dev.
Unpacking libfftw3-dev (from .../libfftw3-dev_3.1.2-3.1_i386.deb) ...
Selecting previously deselected package locales.
Unpacking locales (from .../archives/locales_2.9-6_all.deb) ...
Selecting previously deselected package diffstat.
Unpacking diffstat (from .../diffstat_1.46-1_i386.deb) ...
Selecting previously deselected package quilt.
Unpacking quilt (from .../archives/quilt_0.46-6_all.deb) ...
Processing triggers for man-db ...
Setting up libmagic1 (4.26-2) ...
Setting up file (4.26-2) ...
Setting up html2text (1.3.2a-13) ...
Setting up libpcre3 (7.8-2) ...
Setting up libglib2.0-0 (2.20.0-1) ...
Setting up libxml2 (2.7.3.dfsg-1) ...
Setting up libcroco3 (0.6.1-2) ...
Setting up gettext-base (0.17-6) ...
Setting up gettext (0.17-6) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.15) ...
Setting up debhelper (7.2.6) ...
Setting up libfftw3-3 (3.1.2-3.1) ...
Setting up libfftw3-dev (3.1.2-3.1) ...
Setting up locales (2.9-6) ...
Generating locales (this might take a while)...
Generation complete.
Setting up diffstat (1.46-1) ...
Setting up quilt (0.46-6) ...
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
Reading task descriptions... Done
Current status: 0 broken [-1].
-> Finished parsing the build-deps
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
fakeroot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/114kB of archives.
After this operation, 451kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
(Reading database ... 13207 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.12.2_i386.deb) ...
Processing triggers for man-db ...
Setting up fakeroot (1.12.2) ...
Copying back the cached apt archive contents
Copying source file
-> copying [/home/mira/BUILD/zita-convolver/zita-convolver_1.0.0-1.dsc]
-> copying [/home/mira/BUILD/zita-convolver/zita-convolver_1.0.0.orig.tar.gz]
-> copying [/home/mira/BUILD/zita-convolver/zita-convolver_1.0.0-1.diff.gz]
Extracting source
dpkg-source: warning: extracting unsigned source package (zita-convolver_1.0.0-1.dsc)
dpkg-source: extracting zita-convolver in zita-convolver-1.0.0
dpkg-source: info: unpacking zita-convolver_1.0.0.orig.tar.gz
dpkg-source: info: applying zita-convolver_1.0.0-1.diff.gz
-> Building the package
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package zita-convolver
dpkg-buildpackage: source version 1.0.0-1
dpkg-buildpackage: source changed by Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
dpkg-buildpackage: host architecture i386
fakeroot debian/rules clean
QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
No patch removed
rm -rf .pc debian/stamp-patched
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
# Add here commands to clean up after the build process.
/usr/bin/make -C libs/ clean
make[1]: Entering directory `/tmp/buildd/zita-convolver-1.0.0/libs'
/bin/rm -f *~ *.o *.a *.d *.so.*
make[1]: Leaving directory `/tmp/buildd/zita-convolver-1.0.0/libs'
dh_clean
dpkg-source -b zita-convolver-1.0.0
dpkg-source: info: using source format `1.0'
dpkg-source: info: building zita-convolver using existing zita-convolver_1.0.0.orig.tar.gz
dpkg-source: info: building zita-convolver in zita-convolver_1.0.0-1.diff.gz
dpkg-source: info: building zita-convolver in zita-convolver_1.0.0-1.dsc
debian/rules build
# quilt exits with 2 as return when there was nothing to do.
# That's not an error here (but it's useful to break loops in crude scripts)
QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
Applying patch makefile.patch
patching file libs/Makefile
Now at patch makefile.patch
touch debian/stamp-patched
dh_testdir
# Add here commands to compile the package.
/usr/bin/make -C libs/
make[1]: Entering directory `/tmp/buildd/zita-convolver-1.0.0/libs'
g++ -g -O2 -Wall -I. -fPIC -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O3 -ffast-math -c -o zita-convolver.o zita-convolver.cc
g++ -shared -Wl,-soname,libzita-convolver.so.1 -o libzita-convolver.so.1.0.0 zita-convolver.o -lfftw3f -lpthread
make[1]: Leaving directory `/tmp/buildd/zita-convolver-1.0.0/libs'
touch build-stamp
fakeroot debian/rules binary
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into debian/tmp
/usr/bin/make -C libs/ DESTDIR=/tmp/buildd/zita-convolver-1.0.0/debian/tmp install
make[1]: Entering directory `/tmp/buildd/zita-convolver-1.0.0/libs'
/usr/bin/install -d /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/include
/usr/bin/install -d /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/lib
/usr/bin/install -m 644 zita-convolver.h /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/include
/usr/bin/install -m 755 libzita-convolver.so.1.0.0 /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/lib
/sbin/ldconfig -n /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/lib
ln -sf libzita-convolver.so.1.0.0 /tmp/buildd/zita-convolver-1.0.0/debian/tmp/usr/lib/libzita-convolver.so
make[1]: Leaving directory `/tmp/buildd/zita-convolver-1.0.0/libs'
dh_testdir
dh_testroot
dh_install --autodest --sourcedir=debian/tmp --list-missing
dh_install: debian/tmp/usr/lib/libzita-convolver.so.1 exists in debian/tmp/ but is not installed to anywhere
dh_install: debian/tmp/usr/lib/libzita-convolver.so exists in debian/tmp/ but is not installed to anywhere
dh_install: debian/tmp/usr/lib/libzita-convolver.so.1.0.0 exists in debian/tmp/ but is not installed to anywhere
dh_install: debian/tmp/usr/include/zita-convolver.h exists in debian/tmp/ but is not installed to anywhere
dh_installchangelogs
dh_installdocs
dh_link
dh_strip
dh_compress
dh_fixperms -a
dh_fixperms: I have no package to build
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package `libzita-convolver-dev' in `../libzita-convolver-dev_1.0.0-1_all.deb'.
dpkg-deb: building package `libzita-convolver1' in `../libzita-convolver1_1.0.0-1_all.deb'.
dpkg-genchanges >../zita-convolver_1.0.0-1_i386.changes
dpkg-genchanges: including full source code in upload
dpkg-buildpackage: full upload (original source is included)
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-> cleaning the build env
-> removing directory /var/cache/pbuilder/build//9241 and its subdirectories
Current time: Thu Mar 19 03:38:03 CET 2009
pbuilder-time-stamp: 1237430283
Reply to: