Re: Problem with /scripts/persisten in persistent mode
Greetings,
On Wed, Sep 8, 2010 at 4:35 PM, Adrián Orellana <adrian03410@gmail.com> wrote:
> Hello, Richard,
>
> Trying to follow your directions:
> I downloaded:
> debian-live-60alpha2-amd64-standard.iso
>
> and installed in the pen drive with unetbootin from
>
> http://sourceforge.net/projects/unetbootin/files/UNetbootin/471/unetbootin-linux-471/download
>
I do not know of the above. I only know about dd if= of= to put on
usb drive. I have not used one of the hybrid images but I suspect
something like:
dd if=debian-live-60alpha2-amd64-standard.iso of=/dev/sd(X) where (X)
is the reference to your pen drive.
But if you have it booted lets move on.
>
> Then, when I try to apt-get install live-helper, I got the following
> messages:
> Err http://cdn.debian.net squeeze/main gettext-base 0.17-11
> 404 not found [64.50.236.52 80]
>
> Err http://cdn.debian.net squeeze/main libparted0debian1 2.3-1
> 404 not found [64.50.236.52 80]
> Err http://cdn.debian.net squeeze/main live-helper 2.0~a14-1
>
> 404 not found [64.50.236.52 80]
> Failed to fetch
> http://cdn.debian.net/debian/pool/main/g/gettext/gettext-base_0.17-11_amd64.deb
> 404 not found [64.50.236.52 80]
>
> Failed to fetch
> http://cdn.debian.net/debian/pool/main/p/parted/libparted0debian1_2.3-1_amd64.deb
> 404 not found [64.50.236.52 80]
>
> Failed to fetch
> http://cdn.debian.net/debian/pool/main/l/live-helper/live-helper_2.0~a14-1_all.deb
> 404 not found [64.50.236.52 80]
>
> Unable to fetch some archives, maybe run apt-get update or try with
> --fix-missing?
>
> I checked the URL with ping and it was ok. Then I tried again and I I got
> the same messages with another URL.
>
> With the other version I used previously, the apt-get install live-helper
> was working fine.
>
>
> Could you please give me an advise?
Try these steps as root:
apt-get update
apt-get install live-build
>
> Thank you in advance,
Welcome.
>
> Adrian
>
>
> 2010/9/8 Adrián Orellana <adrian03410@gmail.com>
>>
>> Hi Richard,
>> I was taking a look at the link you provided:
>>
>> http://cdimage.debian.org/cdimage/squeeze_live_alpha2/amd64/iso-hybrid/
>>
>> and I don't see any .img image in order to copy it directly to the
>> pendrive.
>>
>> Could you please instruct me about the procedure I should follow to
>> install the iso image into the pendrive?
>>
>> Thank you again,
>> Adrian
>>
>> 2010/9/7 Richard Nelson <unixabg@gmail.com>
>>>
>>> Greetings,
>>>
>>> On Tue, Sep 7, 2010 at 3:05 PM, Adrián Orellana <adrian03410@gmail.com>
>>> wrote:
>>> > Hi,
>>> >
>>> > I was trying to complete all the information you asked to me.
>>> >
>>> > If I misunderstood something, please tell me to do it right.
>>> >
>>> >
>>> > 2010/9/1 Richard Nelson <unixabg@gmail.com>
>>> >>
>>> >> Greetings,
>>> >>
>>> >> On Wed, Sep 1, 2010 at 3:00 PM, Adrián Orellana
>>> >> <adrian03410@gmail.com>
>>> >> wrote:
>>> >> >
>>> >> >
>>> >> > Hi Richard,
>>> >> > Thank you for your quick answer.
>>> >> >
>>> >> > The lh_build I used is the last one available, as I was trying to
>>> >> > create
>>> >> > an
>>> >> > amd64 OS in a machine that has lenny -i386, then I started the PC
>>> >> > with a
>>> >> > live amd64 usb-key (I downloaded the binary from the site already
>>> >> > prepared)
>>> >>
>>> >> Can you paste the link you used?
>>> >
>>> >
>>> >
>>> > http://cdimage.debian.org/cdimage/release/current-live/amd64/usb-hdd/debian-live-505-amd64-standard.img
>>> >
>>> > when I boot with that version, the boot messages include:
>>> > ...
>>> > Linux debian 2.6.26-2-amd64 #1 SMP Sun Jun 20 20:16:30 UTC 2010 x86_64
>>> > ....
>>> >
>>>
>>>
>>> Try an image from here:
>>>
>>> http://cdimage.debian.org/cdimage/squeeze_live_alpha2/amd64/iso-hybrid/
>>>
>>> >>
>>> >> > in console mode, then, working on an amd64 system, I did:
>>> >> > #sudo apt-get install live-helper
>>> >> > and after that made the config and build already described.
>>> >> > The console mode OS isn't persistent, then I don't have the precise
>>> >> > reference to the version of lh_build, but I constructed it the day
>>> >> > before
>>> >> > yesterday.
>>> >> >
>>> >>
>>> >> Booted with the live image that you are attempting to do a, lh
>>> >> build command can you paste back the results of the command:
>>> >>
>>> >> lh -v
>>> >
>>> > I rebooted my desktop and, after reinstalling live-helper, I did the lh
>>> > -v
>>> > (then, if any modification was introduced in the repository, the
>>> > present
>>> > live-helper tools are not going to be the same than I used a few days
>>> > ago).
>>> > Anyway the commands and their outputs, hand copied, because I was
>>> > working in
>>> > console only mode, as I told you before:
>>> >
>>> > #apt-get install live-helper
>>> > ...
>>> > unpacking from live-helper_1.0.3-2_all.deb
>>> > ...
>>> >
>>>
>>> Please try the latest from squeeze with a download image from above
>>> and then as root install live-build:
>>>
>>> apt-get install live-build
>>>
>>> Then try to build your image again.
>>>
>>> Please report back if this helps.
>>>
>>> >
>>> > #lh -v
>>> > lh-version 1.0.3-2
>>> > This program is a part of live-helper
>>> >
>>> > Copyright (C) 2006-2009 Daniel Baumann <daniel@debian.org>
>>> >
>>> > This program is...
>>> > ...
>>> > Homepage: <http://debian-live.allioth.debian.org/>
>>> >
>>> > Thanks again,
>>> > Adrian
>>> >>
>>> >> > Unfortunately your suggestion didn't work (creating an ext2
>>> >> > partition
>>> >> > labeled live-rw instead of a fat32 one).
>>> >> > I guess I'm missing something in the basic procedure, because the
>>> >> > error
>>> >> > message talk about "can't open /scripts/persistent".
>>> >> > Where or how should I check for that script?
>>> >>
>>> >> Let us get some more details from above to know for sure which version
>>> >> of tools and OS build version.
>>> >>
>>> >> >
>>> >> > Thank you for your time, I appreciate that,
>>> >> >
>>> >>
>>> >> Sure and no worries.
>>> >>
>>> >> > Adrian
>>> >> >
>>> >> >
>>> >> > 2010/8/31 Richard Nelson <unixabg@gmail.com>
>>> >> >>
>>> >> >> Greetings,
>>> >> >>
>>> >> >> On Tue, Aug 31, 2010 at 6:00 PM, Adrián Orellana
>>> >> >> <adrian03410@gmail.com>
>>> >> >> wrote:
>>> >> >> > Hi,
>>> >> >> > I constructed a debian-live with:
>>> >> >> >
>>> >> >> > lh_config --apt apt --apt-recommends enabled --architecture amd64
>>> >> >> > --binary-images usb-hdd --language es
>>> >> >> > --bootappend-live "boot=persistent locale=es_AR.UTF-8 keyb=es"
>>> >> >> > --packages "gnome gcc gparted
>>> >> >> > linux-headers-2.6-${LH_LINUX_FLAVOURS}
>>> >> >> > make rsync wireless-tools"
>>> >> >> > --syslinux-timeout 5 --source enabled --username adrian
>>> >> >> > --hostname
>>> >> >> > imgPro
>>> >> >> >
>>> >> >> > lh_build
>>> >> >> >
>>> >> >> > Then I created on the same usb key a partition labeled live-rw
>>> >> >> > (fat
>>> >> >> > 32)
>>> >> >>
>>> >> >> Can you try with an ext2 file system? I ask since the last time I
>>> >> >> used
>>> >> >> persistence, I used ext2 and all was well.
>>> >> >>
>>> >> >> > When I try to boot, I have got:
>>> >> >> > Begin: Mounting root filesystem ... /init: .: line 171: can't
>>> >> >> > open
>>> >> >> > /scripts/persistent
>>> >> >> > [ 4.109925] Kernel panic - not syncing: Attemped to kill init!
>>> >> >> >
>>> >> >> > I don't know if I should get some script copied into the live-rw
>>> >> >> > partition?
>>> >> >> >
>>> >> >> > Thanks in advance,
>>> >> >> >
>>> >> >> > Adrian
>>> >> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >
>>> >
>>> >
>>
>
>
Reply to: