live-initramfs: Depends: initramfs-tools but it is not going to be installed?
Hi,
I got a weird problem about live-initramfs (1.177.2-1). Using
cdebootstrap, a basic Sid system was created. However when I tried to
install live-initramfs by:
apt-get install live-initramfs
An error occurred:
The following packages have unmet dependencies:
live-initramfs: Depends: initramfs-tools but it is not going to be
installed
E: Broken packages
But, if I manually install initramfs-tools by "apt-get install
initramfs-tools", then I can install live-initramfs by "apt-get install
live-initramfs"...
Here is how to reproduce the problem:
==============
# LANG=C cdebootstrap --arch=i386 --flavour=minimal --include=sysv-rc
sid sid-chroot http://free.nchc.org.tw/debian
# chroot sid-chroot
# apt-get update
# apt-get install live-initramfs
<snipped>
The following packages have unmet dependencies:
live-initramfs: Depends: initramfs-tools but it is not going to be
installed
E: Broken packages
==============
Full log was attached.
Looks like the problem is on initramfs-tools... There is something new
in initramfs-tools 0.94.2. There was no such problem when
initramfs-tools was 0.94.
Any idea?
Thanks in advance.
Steven.
--
Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org>
National Center for High-performance Computing, Taiwan.
http://www.nchc.org.tw
Public Key Server PGP Key ID: 1024D/9762755A
Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A
# LANG=C cdebootstrap --arch=i386 --flavour=minimal --include=sysv-rc sid sid-chroot http://ftp.tw.debian.org/debian
P: Retrieving Release
P: Retrieving Release.gpg
P: Validating Release
I: Good signature from "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>"
P: Parsing Release
P: Retrieving Packages.gz
P: Validating Packages.gz
P: Parsing Packages
P: Retrieving libc-bin
P: Validating libc-bin
P: Retrieving gcc-4.4-base
P: Validating gcc-4.4-base
P: Retrieving libgcc1
P: Validating libgcc1
P: Retrieving libc6
P: Validating libc6
P: Retrieving libstdc++6
P: Validating libstdc++6
P: Retrieving libbz2-1.0
P: Validating libbz2-1.0
P: Retrieving libattr1
P: Validating libattr1
P: Retrieving libacl1
P: Validating libacl1
P: Retrieving libselinux1
P: Validating libselinux1
P: Retrieving coreutils
P: Validating coreutils
P: Retrieving lzma
P: Validating lzma
P: Retrieving dpkg
P: Validating dpkg
P: Retrieving readline-common
P: Validating readline-common
P: Retrieving libncurses5
P: Validating libncurses5
P: Retrieving libreadline6
P: Validating libreadline6
P: Retrieving libusb-0.1-4
P: Validating libusb-0.1-4
P: Retrieving zlib1g
P: Validating zlib1g
P: Retrieving gpgv
P: Validating gpgv
P: Retrieving gnupg
P: Validating gnupg
P: Retrieving debian-archive-keyring
P: Validating debian-archive-keyring
P: Retrieving apt
P: Validating apt
P: Retrieving mawk
P: Validating mawk
P: Retrieving base-files
P: Validating base-files
P: Retrieving base-passwd
P: Validating base-passwd
P: Retrieving sensible-utils
P: Validating sensible-utils
P: Retrieving debianutils
P: Validating debianutils
P: Retrieving dash
P: Validating dash
P: Retrieving bash
P: Validating bash
P: Retrieving bsdutils
P: Validating bsdutils
P: Retrieving diffutils
P: Validating diffutils
P: Retrieving e2fslibs
P: Validating e2fslibs
P: Retrieving perl-base
P: Validating perl-base
P: Retrieving liblocale-gettext-perl
P: Validating liblocale-gettext-perl
P: Retrieving libtext-iconv-perl
P: Validating libtext-iconv-perl
P: Retrieving libtext-charwidth-perl
P: Validating libtext-charwidth-perl
P: Retrieving libtext-wrapi18n-perl
P: Validating libtext-wrapi18n-perl
P: Retrieving debconf-i18n
P: Validating debconf-i18n
P: Retrieving debconf
P: Validating debconf
P: Retrieving libpam0g
P: Validating libpam0g
P: Retrieving libdb4.8
P: Validating libdb4.8
P: Retrieving libpam-modules
P: Validating libpam-modules
P: Retrieving passwd
P: Validating passwd
P: Retrieving libuuid1
P: Validating libuuid1
P: Retrieving libblkid1
P: Validating libblkid1
P: Retrieving libcomerr2
P: Validating libcomerr2
P: Retrieving libss2
P: Validating libss2
P: Retrieving sed
P: Validating sed
P: Retrieving ncurses-bin
P: Validating ncurses-bin
P: Retrieving lsb-base
P: Validating lsb-base
P: Retrieving tzdata
P: Validating tzdata
P: Retrieving libsepol1
P: Validating libsepol1
P: Retrieving mount
P: Validating mount
P: Retrieving sysvinit-utils
P: Validating sysvinit-utils
P: Retrieving insserv
P: Validating insserv
P: Retrieving sysv-rc
P: Validating sysv-rc
P: Retrieving initscripts
P: Validating initscripts
P: Retrieving util-linux
P: Validating util-linux
P: Retrieving e2fsprogs
P: Validating e2fsprogs
P: Retrieving findutils
P: Validating findutils
P: Retrieving grep
P: Validating grep
P: Retrieving gzip
P: Validating gzip
P: Retrieving hostname
P: Validating hostname
P: Retrieving libpam-runtime
P: Validating libpam-runtime
P: Retrieving login
P: Validating login
P: Retrieving ncurses-base
P: Validating ncurses-base
P: Retrieving sysvinit
P: Validating sysvinit
P: Retrieving tar
P: Validating tar
P: Extracting libc-bin
P: Extracting gcc-4.4-base
P: Extracting libc6
P: Extracting libgcc1
P: Extracting libstdc++6
P: Extracting libattr1
P: Extracting libacl1
P: Extracting libselinux1
P: Extracting coreutils
P: Extracting lzma
P: Extracting dpkg
P: Extracting libncurses5
P: Extracting zlib1g
P: Extracting mawk
P: Extracting base-files
P: Extracting base-passwd
P: Extracting sensible-utils
P: Extracting debianutils
P: Extracting dash
P: Extracting bash
P: Extracting bsdutils
P: Extracting diffutils
P: Extracting e2fslibs
P: Extracting perl-base
P: Extracting liblocale-gettext-perl
P: Extracting libtext-iconv-perl
P: Extracting libtext-charwidth-perl
P: Extracting libtext-wrapi18n-perl
P: Extracting debconf
P: Extracting debconf-i18n
P: Extracting libpam0g
P: Extracting libdb4.8
P: Extracting libpam-modules
P: Extracting passwd
P: Extracting libuuid1
P: Extracting libblkid1
P: Extracting libcomerr2
P: Extracting libss2
P: Extracting sed
P: Extracting ncurses-bin
P: Extracting lsb-base
P: Extracting tzdata
P: Extracting libsepol1
P: Extracting mount
P: Extracting sysvinit-utils
P: Extracting insserv
P: Extracting sysv-rc
P: Extracting initscripts
P: Extracting util-linux
P: Extracting e2fsprogs
P: Extracting findutils
P: Extracting grep
P: Extracting gzip
P: Extracting hostname
P: Extracting libpam-runtime
P: Extracting login
P: Extracting ncurses-base
P: Extracting sysvinit
P: Extracting tar
P: Unpacking package dpkg
P: Configuring package dpkg
P: Configuring helper cdebootstrap-helper-rc.d
P: Configuring helper cdebootstrap-helper-makedev
P: Unpacking package libc-bin
P: Unpacking package gcc-4.4-base
P: Unpacking package libc6
P: Unpacking package libgcc1
P: Unpacking package libstdc++6
P: Unpacking package libattr1
P: Unpacking package libacl1
P: Unpacking package libselinux1
P: Unpacking package coreutils
P: Unpacking package lzma
P: Unpacking package libncurses5
P: Unpacking package zlib1g
P: Unpacking package mawk
P: Unpacking package base-files
P: Unpacking package base-passwd
P: Unpacking package sensible-utils
P: Unpacking package debianutils
P: Unpacking package dash
P: Unpacking package bash
P: Unpacking package bsdutils
P: Unpacking package diffutils
P: Unpacking package e2fslibs
P: Unpacking package perl-base
P: Unpacking package liblocale-gettext-perl
P: Unpacking package libtext-iconv-perl
P: Unpacking package libtext-charwidth-perl
P: Unpacking package libtext-wrapi18n-perl
P: Unpacking package debconf
P: Unpacking package debconf-i18n
P: Unpacking package libpam0g
P: Unpacking package libdb4.8
P: Unpacking package libpam-modules
P: Unpacking package passwd
P: Unpacking package libuuid1
P: Unpacking package libblkid1
P: Unpacking package libcomerr2
P: Unpacking package libss2
P: Unpacking package sed
P: Unpacking package ncurses-bin
P: Unpacking package lsb-base
P: Unpacking package tzdata
P: Unpacking package libsepol1
P: Unpacking package mount
P: Unpacking package sysvinit-utils
P: Unpacking package insserv
P: Unpacking package sysv-rc
P: Unpacking package initscripts
P: Unpacking package util-linux
P: Unpacking package e2fsprogs
P: Unpacking package findutils
P: Unpacking package grep
P: Unpacking package gzip
P: Unpacking package hostname
P: Unpacking package libpam-runtime
P: Unpacking package login
P: Unpacking package ncurses-base
P: Unpacking package sysvinit
P: Unpacking package tar
P: Configuring package ncurses-base
P: Configuring package sensible-utils
P: Configuring package libc-bin
P: Configuring package gcc-4.4-base
P: Configuring package libc6
P: Configuring package debianutils
P: Configuring package bsdutils
P: Configuring package perl-base
P: Configuring package libsepol1
P: Configuring package diffutils
P: Configuring package tar
P: Configuring package zlib1g
P: Configuring package libgcc1
P: Configuring package libtext-iconv-perl
P: Configuring package libncurses5
P: Configuring package libattr1
P: Configuring package e2fslibs
P: Configuring package base-passwd
P: Configuring package libcomerr2
P: Configuring package mawk
P: Configuring package libdb4.8
P: Configuring package grep
P: Configuring package hostname
P: Configuring package libacl1
P: Configuring package libss2
P: Configuring package findutils
P: Configuring package insserv
P: Configuring package gzip
P: Configuring package liblocale-gettext-perl
P: Configuring package libselinux1
P: Configuring package libstdc++6
P: Configuring package libtext-charwidth-perl
P: Configuring package libtext-wrapi18n-perl
P: Configuring package dash
P: Configuring package coreutils
P: Configuring package lzma
P: Configuring package ncurses-bin
P: Configuring package base-files
P: Configuring package sed
P: Configuring package debconf-i18n
P: Configuring package sysvinit-utils
P: Configuring package bash
P: Configuring package debconf
P: Configuring package lsb-base
P: Configuring package libpam0g
P: Configuring package sysv-rc
P: Configuring package libpam-modules
P: Configuring package tzdata
P: Configuring package passwd
P: Configuring package libpam-runtime
P: Configuring package login
P: Configuring package libuuid1
P: Configuring package libblkid1
P: Configuring package mount
P: Configuring package initscripts
P: Configuring package util-linux
P: Configuring package sysvinit
P: Configuring package e2fsprogs
P: Unpacking package libbz2-1.0
P: Unpacking package readline-common
P: Unpacking package libreadline6
P: Unpacking package libusb-0.1-4
P: Unpacking package gpgv
P: Unpacking package gnupg
P: Unpacking package debian-archive-keyring
P: Unpacking package apt
P: Configuring package libbz2-1.0
P: Configuring package readline-common
P: Configuring package libreadline6
P: Configuring package libusb-0.1-4
P: Configuring package gpgv
P: Configuring package gnupg
P: Configuring package debian-archive-keyring
P: Configuring package apt
P: Configuring helper cdebootstrap-helper-apt
P: Deconfiguring helper cdebootstrap-helper-apt
P: Deconfiguring helper cdebootstrap-helper-makedev
P: Writing apt sources.list
P: Writing hosts
P: Writing resolv.conf
# chroot sid-chroot/
# apt-get update
Get:1 http://ftp.tw.debian.org sid Release.gpg [835B]
Get:2 http://ftp.tw.debian.org sid Release [104kB]
Ign http://ftp.tw.debian.org sid/main Packages
Get:3 http://ftp.tw.debian.org sid/main Packages [8616kB]
Fetched 8721kB in 2s (3483kB/s)
Reading package lists... Done
# apt-get install live-initramfs
Reading package lists... Done
Building dependency tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
live-initramfs: Depends: initramfs-tools but it is not going to be installed
E: Broken packages
# LANG=C apt-get install initramfs-tools
Reading package lists... Done
Building dependency tree... Done
The following extra packages will be installed:
busybox cpio klibc-utils libklibc libpci3 module-init-tools pciutils udev
usbutils
Suggested packages:
bzip2 wget curl lynx
The following NEW packages will be installed:
busybox cpio initramfs-tools klibc-utils libklibc libpci3 module-init-tools
pciutils udev usbutils
0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.
Need to get 1881kB of archives.
After this operation, 5779kB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://ftp.tw.debian.org sid/main udev 151-3 [429kB]
Get:2 http://ftp.tw.debian.org sid/main cpio 2.11-2 [262kB]
Get:3 http://ftp.tw.debian.org sid/main module-init-tools 3.12~pre2-2 [101kB]
Get:4 http://ftp.tw.debian.org sid/main libpci3 1:3.1.7-2 [50.1kB]
Get:5 http://ftp.tw.debian.org sid/main pciutils 1:3.1.7-2 [256kB]
Get:6 http://ftp.tw.debian.org sid/main busybox 1:1.15.3-1 [317kB]
Get:7 http://ftp.tw.debian.org sid/main libklibc 1.5.17-4 [46.3kB]
Get:8 http://ftp.tw.debian.org sid/main klibc-utils 1.5.17-4 [160kB]
Get:9 http://ftp.tw.debian.org sid/main initramfs-tools 0.94.2 [79.1kB]
Get:10 http://ftp.tw.debian.org sid/main usbutils 0.86-4 [180kB]
Fetched 1881kB in 1s (1000kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package udev.
(Reading database ... 5964 files and directories currently installed.)
Unpacking udev (from .../archives/udev_151-3_i386.deb) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 75.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Selecting previously deselected package cpio.
Unpacking cpio (from .../archives/cpio_2.11-2_i386.deb) ...
Selecting previously deselected package module-init-tools.
Unpacking module-init-tools (from .../module-init-tools_3.12~pre2-2_i386.deb) ...
Selecting previously deselected package libpci3.
Unpacking libpci3 (from .../libpci3_1%3a3.1.7-2_i386.deb) ...
Selecting previously deselected package pciutils.
Unpacking pciutils (from .../pciutils_1%3a3.1.7-2_i386.deb) ...
Selecting previously deselected package busybox.
Unpacking busybox (from .../busybox_1%3a1.15.3-1_i386.deb) ...
Selecting previously deselected package libklibc.
Unpacking libklibc (from .../libklibc_1.5.17-4_i386.deb) ...
Selecting previously deselected package klibc-utils.
Unpacking klibc-utils (from .../klibc-utils_1.5.17-4_i386.deb) ...
Selecting previously deselected package initramfs-tools.
Unpacking initramfs-tools (from .../initramfs-tools_0.94.2_all.deb) ...
Selecting previously deselected package usbutils.
Unpacking usbutils (from .../usbutils_0.86-4_i386.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up udev (151-3) ...
A chroot environment has been detected, udev not started.
Setting up cpio (2.11-2) ...
update-alternatives: using /bin/mt-gnu to provide /bin/mt (mt) in auto mode.
Setting up module-init-tools (3.12~pre2-2) ...
Setting up libpci3 (1:3.1.7-2) ...
Setting up pciutils (1:3.1.7-2) ...
Setting up busybox (1:1.15.3-1) ...
Setting up libklibc (1.5.17-4) ...
Setting up klibc-utils (1.5.17-4) ...
Setting up initramfs-tools (0.94.2) ...
update-initramfs: deferring update (trigger activated)
Setting up usbutils (0.86-4) ...
Processing triggers for initramfs-tools ...
# LANG=C apt-get install live-initramfs
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
dmsetup
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
adduser dmsetup eject file libdevmapper1.02.1 libidn11 libmagic1 libpopt0
libssl0.9.8 rsync sudo user-setup uuid-runtime wget
Suggested packages:
perl-modules cdtool setcd loop-aes-utils curlftpfs genext2fs httpfs2
squashfs-tools mtd-tools unionfs-fuse openssh-client openssh-server
Recommended packages:
cryptsetup
The following NEW packages will be installed:
adduser dmsetup eject file libdevmapper1.02.1 libidn11 libmagic1 libpopt0
libssl0.9.8 live-initramfs rsync sudo user-setup uuid-runtime wget
0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded.
Need to get 5550kB of archives.
After this operation, 16.1MB of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://ftp.tw.debian.org sid/main adduser 3.112 [157kB]
Get:2 http://ftp.tw.debian.org sid/main libpopt0 1.15-1 [50.0kB]
Get:3 http://ftp.tw.debian.org sid/main libssl0.9.8 0.9.8n-1 [3022kB]
Get:4 http://ftp.tw.debian.org sid/main libidn11 1.18-1 [162kB]
Get:5 http://ftp.tw.debian.org sid/main wget 1.12-1.2 [761kB]
Get:6 http://ftp.tw.debian.org sid/main libmagic1 5.04-2 [231kB]
Get:7 http://ftp.tw.debian.org sid/main file 5.04-2 [48.5kB]
Get:8 http://ftp.tw.debian.org sid/main libdevmapper1.02.1 2:1.02.45-1 [72.9kB]
Get:9 http://ftp.tw.debian.org sid/main dmsetup 2:1.02.45-1 [50.6kB]
Get:10 http://ftp.tw.debian.org sid/main eject 2.1.5+deb1+cvs20081104-7 [53.7kB]
Get:11 http://ftp.tw.debian.org sid/main sudo 1.7.2p5-1 [309kB]
Get:12 http://ftp.tw.debian.org sid/main user-setup 1.29 [133kB]
Get:13 http://ftp.tw.debian.org sid/main live-initramfs 1.177.2-1 [102kB]
Get:14 http://ftp.tw.debian.org sid/main rsync 3.0.7-2 [338kB]
Get:15 http://ftp.tw.debian.org sid/main uuid-runtime 2.16.2-0 [58.9kB]
Fetched 5550kB in 2s (2710kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package adduser.
(Reading database ... 6324 files and directories currently installed.)
Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
Selecting previously deselected package libpopt0.
Unpacking libpopt0 (from .../libpopt0_1.15-1_i386.deb) ...
Selecting previously deselected package libssl0.9.8.
Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8n-1_i386.deb) ...
Selecting previously deselected package libidn11.
Unpacking libidn11 (from .../libidn11_1.18-1_i386.deb) ...
Selecting previously deselected package wget.
Unpacking wget (from .../wget_1.12-1.2_i386.deb) ...
Selecting previously deselected package libmagic1.
Unpacking libmagic1 (from .../libmagic1_5.04-2_i386.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_5.04-2_i386.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.45-1_i386.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.45-1_i386.deb) ...
Selecting previously deselected package eject.
Unpacking eject (from .../eject_2.1.5+deb1+cvs20081104-7_i386.deb) ...
Selecting previously deselected package sudo.
Unpacking sudo (from .../sudo_1.7.2p5-1_i386.deb) ...
Selecting previously deselected package user-setup.
Unpacking user-setup (from .../user-setup_1.29_all.deb) ...
Selecting previously deselected package live-initramfs.
Unpacking live-initramfs (from .../live-initramfs_1.177.2-1_all.deb) ...
Selecting previously deselected package rsync.
Unpacking rsync (from .../rsync_3.0.7-2_i386.deb) ...
Selecting previously deselected package uuid-runtime.
Unpacking uuid-runtime (from .../uuid-runtime_2.16.2-0_i386.deb) ...
Processing triggers for initramfs-tools ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up adduser (3.112) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 75.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Setting up libpopt0 (1.15-1) ...
Setting up libssl0.9.8 (0.9.8n-1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 75.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Setting up libidn11 (1.18-1) ...
Setting up wget (1.12-1.2) ...
Setting up libmagic1 (5.04-2) ...
Setting up file (5.04-2) ...
Setting up libdevmapper1.02.1 (2:1.02.45-1) ...
Setting up dmsetup (2:1.02.45-1) ...
update-initramfs: deferring update (trigger activated)
Setting up eject (2.1.5+deb1+cvs20081104-7) ...
Setting up sudo (1.7.2p5-1) ...
No /etc/sudoers found... creating one for you.
Setting up user-setup (1.29) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 75.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Setting up live-initramfs (1.177.2-1) ...
update-initramfs: deferring update (trigger activated)
update-rc.d: warning: live-initramfs start runlevel arguments (none) do not match LSB Default-Start values (1 2 3 4 5)
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
************************************
All rc.d operations denied by policy
************************************
invoke-rc.d: policy-rc.d denied execution of restart.
Setting up uuid-runtime (2.16.2-0) ...
Processing triggers for initramfs-tools ...
Reply to: