etch/powerbook G4 wlan/wpa not working
I don't get wlan with wpa working on my powerbook g4 with etch.
This is the lspci output:
0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)
This is my /etc/network/interfaces file:
iface eth2 inet manual
iface office inet dhcp
iface anywhere inet dhcp
This is my /etc/wpa_supplicant/wpa_supplicant.conf:
ssid="gh-office-wlan" # = airport network name
psk="64-byte hex-string obtained with wpa_passphrase"
The network-admin says "wireless network eth2 active" but under
properties, the network is not selected. It appears in the pop-up menu
though and I can select it, but afterwards ping returns "network unreachable".
There is no wpa_action.log file in /var/log.
Thanks in advance,