Installation on Fujitsu Siemens S7020 SATA
Dear all
I am trying to install the stable release of Debain 3.1 r0a on a Fujitsu
Siemens S7020 and have the problem that the SATA disk is not recognized.
The hardware should be supported as I can boot with Knoppix and can
access the disk.
I have tried to load some of the modules by hand that are loaded by
Knoppix (as far as they are available on the installer cd) (ide_generic,
libata, ata_piix, ...) but did no succeed.
Does any one have an idea how to overcome this problem?
The output of lspci gives:
---------------------------------
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics
Controller (rev 03)
0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller
(rev 03)
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 04)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 2 (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface
Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 04)
0000:00:1f.2 0106: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 04)
0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device
167d (rev 11)
0000:06:03.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7134 (rev 20)
0000:06:05.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
---------------------------------
and my knoppix loads the following modules (lsmod)
---------------------------------
Module Size Used by
autofs4 18820 1
af_packet 20104 0
ext3 124552 1
jbd 65060 1 ext3
ntfs 163728 0
tg3 82180 0
intel_agp 22044 1
agpgart 30512 1 intel_agp
i2c_i801 11276 0
i2c_core 21248 1 i2c_i801
ipw2200 127592 0
firmware_class 11264 1 ipw2200
ieee80211 39076 1 ipw2200
ieee80211_crypt 8648 2 ipw2200,ieee80211
parport_pc 38596 0
parport 33480 1 parport_pc
8250 41692 0
serial_core 21120 1 8250
usbhid 42176 0
pcmcia 21776 2
yenta_socket 21896 1
rsrc_nonstatic 12160 1 yenta_socket
pcmcia_core 42272 3 pcmcia,yenta_socket,rsrc_nonstatic
video 18308 0
thermal 14984 0
processor 24552 1 thermal
fan 7300 0
container 7296 0
button 7168 0
battery 12420 0
ac 7556 0
genrtc 12060 0
unionfs 109944 1
cloop 18848 1
sbp2 24456 0
ohci1394 33028 0
ieee1394 300600 2 sbp2,ohci1394
usb_storage 63296 0
ub 18332 0
ohci_hcd 21896 0
uhci_hcd 31376 0
ehci_hcd 31752 0
usbcore 101496 7
usbhid,usb_storage,ub,ohci_hcd,uhci_hcd,ehci_hcd
---------------------------------
Thanks
Michael
Reply to: