Re: memory stick
I ran hwinfo and got some information which is at the bottom of this
email. Is the problem something to do with the partition (#42?).
all the best
--Colin
41: SCSI 00.0: 10600 Disk
[Created at block.190]
Unique ID: PYMB.55V0VYyfGp9
Parent ID: 5YuN.GgZpSc+hxAA
SysFS ID: /block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:1d.7/usb4/4-1/4-1:1.0/host0/0:0:0:0
Hardware Class: disk
Model: "USB Flash Memory"
Device: "USB Flash Memory"
Revision: "1.00"
Driver: "usb-storage", "sd"
Device File: /dev/sda
Device Number: block 8:0-8:15
Geometry (Logical): CHS 962/32/16
Size: 492544 sectors a 512 bytes
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #20 (USB Controller)
42: None 00.0: 11300 Partition
[Created at block.352]
Unique ID: 1tKY.SE1wIdpsiiC
Parent ID: PYMB.55V0VYyfGp9
SysFS ID: /block/sda/sda1
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda1
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #41 (Disk)
Reply to: