problem configuring pcmcia card
Hello,
I'm trying to use a cdrom and a modem/ethernet card on my laptop (asus L8400)
They are both detected at boot time, but I'm unable to use them afer.
Here are the message I have for the cdrom:
pr 17 20:02:07 (none) kernel: Linux Kernel Card Services 3.1.22
Apr 17 20:02:07 (none) kernel: options: [pci] [cardbus] [pm]
Apr 17 20:02:07 (none) kernel: PCI: Found IRQ 9 for device 00:0a.0
Apr 17 20:02:07 (none) kernel: PCI: Sharing IRQ 9 with 01:00.0
Apr 17 20:02:07 (none) kernel: PCI: Assigned IRQ 9 for device 00:0a.1
Apr 17 20:02:07 (none) kernel: Yenta IRQ list 08b8, PCI irq9
Apr 17 20:02:07 (none) kernel: Socket status: 30000410
Apr 17 20:02:07 (none) kernel: Yenta IRQ list 08b8, PCI irq9
Apr 17 20:02:07 (none) kernel: Socket status: 30000006
Apr 17 20:02:08 (none) kernel: cs: memory probe 0x0c0000-0x0fffff: excluding
0xc0000-0xcbfff 0xe0000-0xfffff
Apr 17 20:02:15 (none) kernel: hdc: probing with STATUS(0x80) instead of
ALTSTATUS(0xff)
Apr 17 20:02:15 (none) kernel: hdc: ARCHOS MiniCDRW XS8432, ATAPI
CD/DVD-ROM drive
Apr 17 20:02:15 (none) kernel: hdc: IRQ probe failed (0xb9f8)
Apr 17 20:02:15 (none) kernel: ide1: DISABLED, NO IRQ
Apr 17 20:02:17 (none) kernel: hdc: ERROR, PORTS ALREADY IN USE
Apr 17 20:02:19 (none) kernel: ide1: ports already in use, skipping probe
Apr 17 20:02:26 (none) last message repeated 3 times
Apr 17 20:02:28 (none) kernel: ide1: ports already in use, skipping probe
Apr 17 20:02:34 (none) last message repeated 3 times
Apr 17 20:02:34 (none) kernel: ide_cs: ide_register() at 0x100 & 0x10e, irq 0 failed
Apr 17 20:02:34 (none) kernel: Trying to free nonexistent resource
<00000100-0000010f>
and the message I have for the modem/ethernet card:
pr 17 20:02:07 (none) kernel: Linux Kernel Card Services 3.1.22
Apr 17 20:02:07 (none) kernel: options: [pci] [cardbus] [pm]
Apr 17 20:02:07 (none) kernel: PCI: Found IRQ 9 for device 00:0a.0
Apr 17 20:02:07 (none) kernel: PCI: Sharing IRQ 9 with 01:00.0
Apr 17 20:02:07 (none) kernel: PCI: Assigned IRQ 9 for device 00:0a.1
Apr 17 20:02:07 (none) kernel: Yenta IRQ list 08b8, PCI irq9
Apr 17 20:02:07 (none) kernel: Socket status: 30000410
Apr 17 20:02:07 (none) kernel: Yenta IRQ list 08b8, PCI irq9
Apr 17 20:02:07 (none) kernel: Socket status: 30000006
Apr 17 20:02:08 (none) kernel: cs: memory probe 0x0c0000-0x0fffff: excluding
0xc0000-0xcbfff 0xe0000-0xfffff
Apr 17 20:02:15 (none) kernel: hdc: probing with STATUS(0x80) instead of
ALTSTATUS(0xff)
Apr 17 20:02:15 (none) kernel: hdc: ARCHOS MiniCDRW XS8432, ATAPI
CD/DVD-ROM drive
Apr 17 20:02:15 (none) kernel: hdc: IRQ probe failed (0xb9f8)
Apr 17 20:02:15 (none) kernel: ide1: DISABLED, NO IRQ
Apr 17 20:02:17 (none) kernel: hdc: ERROR, PORTS ALREADY IN USE
Apr 17 20:02:19 (none) kernel: ide1: ports already in use, skipping probe
Apr 17 20:02:26 (none) last message repeated 3 times
Apr 17 20:02:28 (none) kernel: ide1: ports already in use, skipping probe
Apr 17 20:02:34 (none) last message repeated 3 times
Apr 17 20:02:34 (none) kernel: ide_cs: ide_register() at 0x100 & 0x10e, irq 0 failed
Apr 17 20:02:34 (none) kernel: Trying to free nonexistent resource
<00000100-0000010f>
The module are correctly loaded (lsmod looks OK), but I can't access those devices.
If you have any suggestion ???
For information, my cdrom is an archos external cdrom, and the ethernet/modem card
is a 3com 3CCFEM556B 10/100 LAN + 56K Modem.
I was able to use the modem card under slackware, but I can't figure out how to use it
under debian (my laptop has a winmodem...too bad).
Thanks in advance for your help.
Renaud
Reply to: