Hi, there are a lot of error messages, yes. Do you have the ECDT patch in your kernel? Did you update your BIOS? And if yes, how can I update the BIOS without a floppy drive or Windoze? Now to the error messages: mkretz@Vorlon% dmesg Linux version 2.4.21-pre5-acpi-preemptible-1 (mkretz@Vorlon) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Wed Mar 19 10:30:52 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff6a000 (ACPI data) BIOS-e820: 000000001ff6a000 - 000000001ff7c000 (ACPI NVS) BIOS-e820: 000000001ff7c000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130912 zone(0): 4096 pages. zone(1): 126816 pages. zone(2): 0 pages. ACPI: RSDP (v002 IBM ) @ 0x000f7120 ACPI: XSDT (v001 IBM TP-1M 00000.08209) @ 0x1ff633f8 ACPI: FADT (v001 IBM TP-1M 00000.08209) @ 0x1ff63444 ACPI: SSDT (v001 IBM TP-1M 00000.08209) @ 0x1ff634f8 ACPI: ECDT (v001 IBM TP-1M 00000.08209) @ 0x1ff69f55 ACPI: TCPA (v001 IBM TP-1M 00000.08209) @ 0x1ff69fa6 ACPI: BOOT (v001 IBM TP-1M 00000.08209) @ 0x1ff69fd8 ACPI: DSDT (v001 IBM TP-1M 00000.08209) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. Kernel command line: auto BOOT_IMAGE=Linux ro root=306 No local APIC present or hardware disabled Initializing CPU#0 Detected 1599.871 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3191.60 BogoMIPS Memory: 514904k/523648k available (1215k kernel code, 8356k reserved, 535k data, 112k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030228 PCI: PCI BIOS revision 2.10 entry at 0xfd91e, last bus=5 PCI: Using configuration type 1 ACPI-0292: *** Info: Table [ECDT] replaced by host OS ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 (swsusp) S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\KCMD] (Node c162ecc0), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.PUBS._STA] (Node c1638e80), AE_BAD_PARAMETER ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\RBEC] (Node c162a500), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node c1636b80), AE_BAD_PARAMETER ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\RBEC] (Node c162a500), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node c1636e00), AE_BAD_PARAMETER ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N030ATCS04-0, ATA DISK drive blk: queue c030fac0, I/O limit 4095Mb (mask 0xffffffff) hdc: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\CMOS] (Node c162a8c0), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._Q31] (Node c1636240), AE_BAD_PARAMETER hda: host protected area => 1 hda: 58605120 sectors (30006 MB) w/1768KiB Cache, CHS=3876/240/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 > p4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 112k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 1073480k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal Real Time Clock Driver v1.10e radeonfb: ref_clk=2700, ref_div=60, xclk=14300 from BIOS radeonfb: panel ID string: 1024x768 radeonfb: detected DFP panel size from BIOS: 1024x768 Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon M6 LY DDR SGRAM 16 MB radeonfb: DVI port LCD monitor connected radeonfb: CRT port no monitor connected mice: PS/2 mouse device common for all mice ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\RBEC] (Node c162a500), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.AC__._PSR] (Node c1634200), AE_BAD_PARAMETER ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_PR_.CPU_._PPC] (Node c160bb40), AE_AML_NO_RETURN_VALUE ACPI: Processor [CPU] (supports C1 C2 C3, 2 performance states, 8 throttling states) ACPI-1121: *** Error: Method execution failed [\_TZ_.THM0._TMP] (Node c162c340), AE_AML_NO_RETURN_VALUE ACPI: Thermal Zone [THM1] (50 C) apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,11), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0x1800, IRQ 4 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0x1820, IRQ 9 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 uhci.c: USB UHCI at I/O 0x1840, IRQ 6 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 ALSA ../alsa-kernel/pci/intel8x0.c:2560: joystick(s) found parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). irda_init() Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta IRQ list 0080, PCI irq5 Socket status: 30000006 IrDA: Registered device irda0 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. irtty_net_open() irlap_change_speed(), setting speed to 9600 thinkpad: I have registered to handle major: 10 minor: 170. smapi: 32-bit protected mode SMAPI BIOS found. :-) smapi: SMAPI BIOS return codes differ! ip_tables: (C) 2000-2002 Netfilter core team ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\CMOS] (Node c162a8c0), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._Q09] (Node c1636480), AE_BAD_PARAMETER ip_conntrack version 2.1 (4091 buckets, 32728 max) - 292 bytes per conntrack apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. [drm] Initialized radeon 1.1.1 20010405 on minor 0 ACPI-0341: *** Error: Handler for [SystemMemory] returned AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\SMI_] (Node c162a400), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\RBEC] (Node c162a500), AE_BAD_PARAMETER ACPI-1121: *** Error: Method execution failed [\_SB_.LID_._LID] (Node c163f300), AE_BAD_PARAMETER eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others eth0: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller, 00:00:E2:86:B3:B4, IRQ 10. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Cisco Systems VPN Client Version 3.7.3 (A) kernel module loaded hub.c: new USB device 00:1d.1-2, assigned address 2 usb.c: USB device 2 (vend/prod 0x461/0x4d03) is not claimed by any active driver. usb.c: registered new driver usbmouse input0: USB HIDBP Mouse 0461:4d03 on usb2:2.0 usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers This is kernel-2.4.21-pre5 with - preempt-kernel-rml-2.4.21-pre1-1.patch - acpi-20030228-2.4.21-pre4.diff.gz - patch-acpi-acpi20030228-swsusp19.gz - ECDT override On Sunday March 30 2003 23:07, Stefan Rotsch wrote: > Am 2003.03.29 22:42 schrieb(en) Matthias Kretz: > Hi, > > > Using this new kernel the keyboard works like a charm, BUT all the > > buttons > > stop working, the battery information is gone, the Thinklight doesn't > > work > > anymore and the brightness buttons have no effect anymore. I find it > > a lot > > more important to be able to type, though. > > Are there any error messages at system startup? All the items mentioned > above work fine on my R32 with acpi-20030321 and Kernel 2.4.21-pre5. > > Btw.: IBM released a new BIOS a few days ago, but I found no information > regarding an updated ECDT-table. Any informations about this? > > -- > Herzliche Grüße / kind regards > Stefan Rotsch -- C'ya Matthias ________________________________________________________ Matthias Kretz (Germany) <>< http://Vir.homeip.net/ MatthiasKretz@gmx.net, kretz@kde.org, Matthias.Kretz@urz.uni-heidelberg.de
Attachment:
pgpAEo0u9BdU8.pgp
Description: signature