Audio on Prostar 8880
Hello,
I running a 2.4.21 kernel with Debian(woody) Stable. I thought I
correctly selected audio support in
before building out the kernel. This portable has just about everything
but USB 2.0 I could
easily have conflict either in the audio of video packages I have
"apt-get" installed.
I thinking about upgrading the kernel to 2.6-testing with debian, but, I
figure I sould install
this on an old ibm thinkpad 770ED or a Desktop Pentium 350, to get some
practice BEFORE
I screw up the portable I use to make a living. I guess I'm looking for
suggestions
or guidance, as well as details on getting the audio and video to work
on this Prostar 8880.
<in a pop up window, I get this error message>
Sound server informational message:
Error while initializing the sound driver:
Cant's set requested samplingrate (requested rate 44100, got rate 32000)
The sound server will continue, using the null outpu device.
DMESG:
es1371: version v0.32 time 11:16:41 Aug 22 2003
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Found IRQ 11 for device 02:04.1
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
IRQ routing conflict for 02:02.0, have irq 10, want irq 11
PCI: Sharing IRQ 11 with 02:04.0
PCI: Sharing IRQ 11 with 02:09.1
btaudio: Bt878 (rev 17) at 02:04.1, irq: 11, latency: 128, mmio: 0x80001000
btaudio: using card config "default"
btaudio: registered device dsp0 [digital]
btaudio: registered device dsp1 [analog]
btaudio: registered device mixer0
Creative EMU10K1 PCI Audio Driver, version 0.20, 11:16:36 Aug 22 2003
<skip>
bttv0: Bt878 (rev 17) at 02:04.0, irq: 11, latency: 128, mmio: 0x80000000
bttv0: detected: AVerMedia TVCapture 98 [card=13], PCI subsystem ID is
1461:0004bttv0: using: BT878(AVerMedia TVCapture 98) [card=13,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [11]
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Avermedia eeprom[0x4001]: tuner=2 radio:no remote control:yes
bttv0: using tuner=2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
ideas or suggestions are most welcome
James
Reply to: