pcmcia slot

[Damien Babilon <damien@websol.be>]

Hi everybody,

I'm new to the list... 
I have a problem with my CaedBus slot on my Targa Visionnary XP

Here is the output of lspci:

00:0b.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
        Subsystem: Uniwill Computer Corp: Unknown device 3000
        Flags: bus master, slow devsel, latency 0, IRQ 255
        Memory at 20000000 (32-bit, non-prefetchable)
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        16-bit legacy interface ports at 0001

IRQ 255 is very strange....

When I try to start /etc/init.d/pcmcia, I get the following message:

Starting PCMCIA Services
PCI: No IRQ found for interrupt pin A device 00:0b.0. Please try using
pci=biosirq

After this, the pc freezes.

I get a config file from a Suse user on same machine.
I get it to work with Mandrake, but since I'm on Debian, I am not more
able to start it.
The config file is attached... 
The CardBus slot use the IRQ 10 (Read under Win XP) but lspci give me
also an usb controler on this IRQ:

Bus  0, device  16, function  3:
    USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130).
      IRQ 10.
      Master Capable.  Latency=32.
      Non-prefetchable 32 bit memory at 0xdffff700 [0xdffff7ff].

What can I do to get PCMCIA working?

Best regards,

Damien
-- 

---------------------------------

Damien Babilon [damien@websol.be]
Mobile +32 (0)486/631.971
Tel: +32 (0)10/860.803
Rue St. Médard, 2
B - 1370 Jodoigne

#
 # Local PCMCIA Configuration File 
 # 
 #---------------------------------------------------------------------- 
 
 # System resources available for PCMCIA devices 
 
 # ports 0x810-0x81f hurt on some DELL machines 
 # include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff 
 # include port 0x100-0x4ff, port 0x800-0x80f, port 0x820-0x8ff, port 0xc00-0xcff 
 # include memory 0xc0000-0xfffff 
 # include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff 
 
 include memory 0xffdff000-0xffdfffff 
 include memory 0xffdfe000-0xffdfefff 
 include memory 0xfbdfe000-0xffdfdfff 
 include memory 0x000df000-0x000dffff 
 
 include port 0xfe00-0xfeff 
 include port 0xfd00-0xfdff 
 
 # High port numbers do not always work... 
 # include port 0x1000-0x17ff 
 
 # Extra port range for IBM Token Ring 
 # include port 0xa00-0xaff 
 
 # Resources we should not use, even if they appear to be available 
 
 # First built-in serial port 
 # exclude irq 4 
 # Second built-in serial port 
 # exclude irq 3 
 # First built-in parallel port 
 # exclude irq 7 
 
 exclude irq 0 
 exclude irq 1 
 exclude irq 3 
 exclude irq 5 
 exclude irq 8 
 exclude irq 9 
 include irq 10 
 exclude irq 11 
 exclude irq 12 
 exclude irq 13 
 exclude irq 14 
 exclude irq 15