[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: More PCMCIA problems



rehi doug...

please stick to the list.

* Doug Neville-Dove <d.neville-dove@trowcom.co.uk> [2003-07-18 09:45 +0200]:

> I've checked out what you suggested and I do have pcmcia_cs and
> pcmcia-modules-2.4.18-bf2.4 installed.
> 
> /etc/init.d/pcmcia had the entry pcic=i82365, but I just tried
> "yenta_socket" in there but it made no difference.

what are the error messages when you do

/etc/init.d/pcmcia start

(or restart)?

> So I tried lsmod and sure enough there is no entry for "i82365" or
> "yenta_socket".

what do you see when you modprobe either of them by hand?

> Obviously then it's not loading - any other ideas??? ;-)

yes, provide us with some error messages. :)


cheers,
 sebastian

> On Thu, 2003-07-17 at 13:45, Sebastian Henschel wrote:
> > 
> > * Doug Neville-Dove <d.neville-dove@trowcom.co.uk> [2003-07-17 14:32 +0200]:
> > 
> > > I'm using kernel 2.4.18 & when I do 'cardinfo' it tells me "no pcmcia
> > > driver in /proc/devices".
> > 
> > i get that message when i stop the pcmcia service.
> > so make sure to have the packages pcmcia-cs and kernel-modules-2.4.18bf2.4
> > (or so) installed.
> > "/etc/init.d/pcmcia" should load the right kernel module and start
> > /sbin/cardmgr. if not, you might try to change the variable PCIC in
> > /etc/default/pcmcia from "i82365" to "yenta_socket".
> > the pcmcia service should be started in /etc/rc2.d (or whatever your
> > default runlevel is).
> > 
> > > Yet in kde control centre-pci I see:
> > > 
> > > "00:0a.0 CardBus bridge:Texas Instruments PCI1131 (rev 01)
> > > Flags:bus master,medium devsel,latency 0
> > > Memory xxxxxx
> > > I/O window 0: xxxxx
> > > I/O window 1: xxxxx
> > > 16-bit legacy interface ports at 0001
> > 
> > i assume that this is what kde controlcenter gets from "lspci".
> > this does not mean that the driver for pcmcia is loaded. check "lsmod"
> > and look for "i82365" or "yenta_socket" to see if it is.

-- 
::: sebastian henschel
::: kodeaffe
::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import

Attachment: pgp5ubvz0iJVJ.pgp
Description: PGP signature


Reply to: