[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]


I kind of got a very good idea or guide but this si the message that root sends on rebooting, any idea on what to do?:
Sound server informational message:
Error while initializing the sound driver:
Can't set playback format (_format = -1, asked driver to give 16, got 8)
The sound server will continue, using the null output device.

this is the dmesg thing that came out
Linux version 2.4.20-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Mit Mär 26 15:37:36 CET 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 00000000000ec000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable)
 BIOS-e820: 0000000003ff0000 - 0000000004000000 (ACPI data)
 BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
 BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
 BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
63MB LOWMEM available.
On node 0 totalpages: 16368
zone(0): 4096 pages.
zone(1): 12272 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 299.946 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 598.01 BogoMIPS
Memory: 61852k/65472k available (1270k kernel code, 3232k reserved, 503k data, 128k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU0: Intel Pentium II (Deschutes) stepping 02
per-CPU timeslice cutoff: 1462.89 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf1557, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:02.0
PCI: Found IRQ 11 for device 00:02.1
PCI: Cannot allocate resource region 4 of device 00:07.1
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xfe000000, mapped to 0xc480d000, size 2048k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:96e0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK6409MAV, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12685680 sectors (6495 MB), CHS=789/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
 hda: hda1 < hda5 > hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: TEAC      Model: CD-224E           Rev: 7.5A
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 165k freed
VFS: Mounted root (ext2 filesystem).
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 128k freed
Adding Swap: 497972k swap-space (priority -1)
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:02.0
PCI: Found IRQ 11 for device 00:02.1
Yenta IRQ list 0498, PCI irq11
Socket status: 30000011
Yenta IRQ list 0498, PCI irq11
Socket status: 30000007
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS1: LSR safety check engaged!
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xffe0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
init_module: prism2_usb.o: 0.2.0 Loaded
init_module: dev_info is: prism2_usb
usb.c: registered new driver prism2_usb
NET4: LAPB for Linux. Version 0.01 for NET4.0
Linux video capture interface: v1.00
usb.c: registered new driver ov511
ov511.c: v1.61 for Linux 2.4 : ov511 USB Camera Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Toshiba System Managment Mode driver v1.11 26/9/2001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
opl3sa2: No PnP cards found
opl3sa2: 0 PnP card(s) found.
raw1394: /dev/raw1394 device initialized
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
blk: queue c032bfc4, I/O limit 4095Mb (mask 0xffffffff)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ttyS02 at port 0x03e8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ttyS1: LSR safety check engaged!
solo1: version v0.19 time 15:49:36 Mar 26 2003
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 3.01 detected OK (220)
sb: Interrupt test on IRQ7 failed - Probable IRQ conflict
SB DSP version is just 3.01 which means that your card is
several years old (8 bit only device) or alternatively the sound driver
is incorrectly configured.
MIDI Loopback device driver
AWE32: No ISAPnP cards found
AWE32: not detected
solo1: version v0.19 time 15:49:36 Mar 26 2003
solo1: version v0.19 time 15:49:36 Mar 26 2003
Ing. Antonio Salgado Leiner
Coord.de Talleres de Medios
GULEV-U.X.   icq:128651127
cuando ve uno a las actrices Italianas, no se explica porque Romulo y Remo recurrieron a una Loba.
mensaje escrito con electrones 100% reciclados

Stop paying $35.00 for a Web Address.. iDotz.Net offers Cool
Domains @ Great Prices! .Com, .Net, .Org - Only $8.75/Yr. Goto: http://www.idotz.net

Select your own custom email address for FREE! Get you@yourchoice.com w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag

Reply to: