[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

ieee1394 CD-writer



Hi List,
I've got a little problem with my ieee1394 CD-writer... I can't mount it and 
it isn't found by cdrecord.
For using this device I modprobe the following modules:
ieee1394
ohci1394
sbp2

The dmesg output after loading these modules is:
---snip----
ieee1394: Node 00:1023 changed to 01:1023
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[00:1023]: Max speed [S400] - Max payload [2048]
ieee1394: Device added: Node[00:1023]  GUID[0008b502500502c9]  [ADS 
Technologies, Inc.  ]
ieee1394: Host removed: Node[01:1023]  GUID[00023f230b003abe]  [Linux 
OHCI-1394]
ieee1394: Device removed: Node[00:1023]  GUID[0008b502500502c9]  [ADS 
Technologies, Inc.  ]
ieee1394: sbp2: Logged out of SBP-2 device
scsi : 1 host left.
ohci1394: $Rev: 578 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[f0000800-f0000fff]  Max 
Packet=[2048]
ieee1394: Device added: Node[00:1023]  GUID[0008b502500502c9]  [ADS 
Technologies, Inc.  ]
ieee1394: Host added: Node[01:1023]  GUID[00023f230b003abe]  [Linux OHCI-1394]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[00:1023]: Max speed [S400] - Max payload [2048]
scsi1 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)
$Rev: 584 $ James Goodwin <jamesg@filanet.com>
SBP-2 module load options:
- Max speed supported: S400
- Max sectors per I/O supported: 255
- Max outstanding commands supported: 8
- Max outstanding commands per lun supported: 1
- Serialized I/O (debug): no
- Exclusive login: yes
  Vendor: AOPEN     Model: CD-RW CRW4852     Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
---snap---


a #cat /proc/scsi/scsi shows the following:

Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: AOPEN    Model: CD-RW CRW4852    Rev: 1.00
  Type:   CD-ROM                           ANSI SCSI revision: 02

I've tried every scsi device I could find in /dev/ but none worked with the 
command:

#mount -t iso9660 /dev/scd0 /cdwriter

I get this message:

mount: /dev/scd0 is not a valid block device

Any ideas?

Thank You in advance

Max

-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GIT(S) dx s: a--- C++ UL++++ P+ L+++ E--- W+++ N+ o-- K- w--
O-- M- V- PS+ PE++ Y PGP++ t- 5-- X- R- tv b+(++) DI++ D+
G e* h! r y?
------END GEEK CODE BLOCK------

GnuPG key available on http://www.linuxforall.de

Think about TCPA

Don't let entertainment industry cut Your rights!

FAQ: 
English: http://www.cl.cam.ac.uk/~rja14/tcpa-faq.html
German: http://moon.hipjoint.de/tcpa-palladium-faq-de.html





Reply to: