Re: PON Problems
> Brandon Philips wrote:
> > I used pppconfig to set up my DialUp Worldnet account but it won't start
> > PPPD.
Mark Barnes:
> I've used the command "plog" to diagnose these kinds of problems. You
...should activate the 'debug' option in /etc/PPP/options (around line 150)
to enable debugging output. I don't know about plog; anyway you can direct
the debugging output from syslog with a line in etc/syslog.conf like:
daemon.*;local2.* /var/log/ppp-debug.log
as pppd uses the daemon facility to report its debugging.
Generally i recommend three things to do:
Use wvdial to gain the basic setup parameters,
transfer them to a ppp peerfile and check them with pon;
Trie to log in with minicom;
Use AT&F to reset your Modem (instead of ATZ ).
cheers
micha
--
micha.
Reply to: