Re: CompactFlash PC Card Adapter
Werner Heuser <Werner.Heuser@web.de> writes:
> As mentioned sometimes before the PCMCIA adapter is not the
> cause of the problem. Please refer always to the card which
> causes trouble.
This is one Psion/Sandisc 16 MB, one new Samsung 16 MB and one Noname
("ProFoto") 64 MB Card. The Pson/Sandis and the "ProFoto" Card did
their job with mdk 8.2 before.
> > I compiled a new Kernel (2.4.20) without pcmcia support. Then I
> > compiled the pcmcia sources from the woody Distribution (used
> > make-kpg) before installing the debs i removed the pcmcia packages and
> > the /etc/pcmcia directory ... But the error is still the same ...
>
> Why don't you just follow the recommendation I have given already?
> Take the latest PCMCIA-CS package from its original source!
I did that. I downloaded the newest Version of pcmcia-cs (3.2.3) And
compiled It against the Kernel I build (see above, without PCMCIA
Stuff) but the Card still doesn't work!
I once got the error: ide-cs: ParseTuple: Bad CIS tuple
After that I allways get the following error:
cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000 0xdffff
cs: memory ... 0xc... 0x0c.... 0xc.... 0xc...
ide-cs: GetFirtsuple: No more items
(the memory probe just occures when i insert the Card the first time
after boot)
But the D-Link Cardbus know works again ... !
[...]
> Please tell more details. What error messages occur? Which
> card is it exactly? Which driver and PCMCIA-CS version you are using?
3.2-3
> What about dump_cis and what about a firmware update?
Socket 0/1 no CIS present ... :(
firmware update ... Don't know where to get one ... and the Sandisc
and the noname Card worked with mdk 8.2 as mentioned above, so a
update wan't help so much or is that wrong?
Thanks for your help!
Florian
--
Florian Reichert
Please notice: e-mails to my adress florianr@gmx.net must not be larger
than 5 k, because they will be filtered else. If you would like to send
anny larger e-mail to me pleas ask for alternative Contact!
Reply to: