Re: CompactFlash PC Card Adapter
Card Services (pcmcia-cs) changed between Woody (3.1.33-6) and sid
(3.2.2-1). You need pcmcia-cs from sid in order to use 2.4.20.
Unfortunately pcmcia-cs-3.2.2-1 depends on the infamous libc6 and some
other stuff from sid you may not want to install right now.
I was faced with the same choice, and decided to stay with 2.4.18 and
On 13 Feb 2003 04:21:55 +0100
Florian Reichert <firstname.lastname@example.org> wrote:
> Werner Heuser <Werner.Heuser@web.de> writes:
> > > Thats what I am actually trying! But I never had success bulding a
> > > 2.4 Kernel without pcmcia and the pcmcia-cs. I allways missed
> > > something so that something didn't work. But I am going to give it a
> > > try ... Will report success here...
> > There are two completely different approaches for PCMCIA-CS support
> > in the 2.4 series and they are mutually exclusive, see README-2.4
> > in the PCMCIA-CS package. Try to start by _disabling_ any
> > PCMCIA support in the Kernel and leave it to the PCMCIA package
> > itself, `make config' for this package will make the right
> > decision for you. If really doesn't work, enable support in
> > the Kernel and don't forget to change the driver in
> > /etc/default/pcmcia.conf then.
> Sorry that took a while but half a liter beer knocked out my Notebook
> for one week ... know it is back working properly!
> But the PCMCIA Adapter for my CF Card still doesn't work!
> I compiled a new Kernel (2.4.20) without pcmcia support. Then I
> compiled the pcmcia sources from the woody Distribution (used
> make-kpg) before installing the debs i removed the pcmcia packages and
> the /etc/pcmcia directory ... But the error is still the same ...
> cs: unable to map card memory!
> cs: unable to map ....
> cardctl ident no product info available ....
> BTW know the D-Link Cardbus Nic doesn't work too ....
> Ok I will try to remove the pcmcia packages again an compile thhe
> newest Version of pcmcia-cs from sourceforg.
> Any other Hints here?
> Thanks for help?
> Florian Reichert
> Please notice: e-mails to my adress email@example.com must not be larger
> than 5 k, because they will be filtered else. If you would like to send
> anny larger e-mail to me pleas ask for alternative Contact!
> To UNSUBSCRIBE, email to firstname.lastname@example.org
> with a subject of "unsubscribe". Trouble? Contact