PCMCIA NIC & internal NIC
Hello. There's a colleague at work here with a Sony VAIO and two network
interfaces. One is the built in NIC that requires a dongle to use, and the
other is a PCMCIA network card. The problem is that apparently the network
is being initialized before the PCMCIA devices are. Judging by the scripts
in /etc/init.d/, everything is in order - but in practice eth1 (the PCMCIA
card) is not initialized before it tries to get set up with the config in
/etc/network/interfaces. What's the matter here? Is this a configuration
error on my part, or Debian's?
Thanks.
chris horn.
-----
chorn@moore2-l:/etc$ ls rc?.d/S*pcmcia
rc2.d/S20pcmcia rc3.d/S20pcmcia rc4.d/S20pcmcia rc5.d/S20pcmcia
chorn@moore2-l:/etc$ ls rc?.d/S*networking
rc0.d/S35networking rc6.d/S35networking rcS.d/S40networking
3c59x.c 18Feb01 Donald Becker and others
http://www.scyld.com/network/vortex.html
pcnet32.c: PCI bios is present, checking for devices...
The PCI BIOS has not enabled this device! Updating PCI command 0013->0017.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V.
Savochkin <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth0: OEM i82557/i82558 10/100 Ethernet, 08:00:46:05:81:4C, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 100001-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V.
Savochkin <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
[unrelated stuff snipped]
Linux PCMCIA Card Services 3.1.33
kernel build: 2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf50
00:0a.0 -> irq 9
00:0b.0 -> irq 9
Intel ISA/PCI/CardBus PCIC probe:
Ricoh RL5C475 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x68000000
host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat
168/176] [bus 32/34]
ISA irqs (default) = 3,4,5,7,10,11,12,15 PCI status changes
-----
chorn@rand.org
703.413.1100 x5100
Reply to: