>>>>> "johan" == johan van de wauw <johanvdw@ulyssis.org> writes: johan> Hi all, To learn a bit more about debian and linux, I tried johan> compiling a new kernel to use for my Toshiba Sattelite 1800-S514. johan> I got everything working, except my D-link-networkcard. It's a johan> D-Link DFE-680TXD. The card is recognised during startup as an johan> ADMTek Centaur, lik it is detected when using my normal setup johan> (when the card works) The card works fine using my normal debian johan> installation (kernel BF 2.4.18). I compiled the code after johan> adding pcmcia-cs to it. I did enable my intel-bridge in the johan> kernel, and Cardbus-networkcards. It may help to look at the options from the bf 2.4.18 kernel. It should be located in /boot/config-2.4.18-bf2.4. johan> Anyone has an idea what step I forgot about, or how I can find johan> out more about which modules are loaded to use my current johan> networkcard? Use the lsmod command, and pick through its output (it shouldn't be too hard, because most of the stuff you should be clear that it isn't related). -- Hubert Chan <hubert@uhoreg.ca> - http://www.uhoreg.ca/ PGP/GnuPG key: 1024D/124B61FA Fingerprint: 96C5 012F 5F74 A5F7 1FF7 5291 AF29 C719 124B 61FA Key available at wwwkeys.pgp.net. Encrypted e-mail preferred.
Attachment:
pgpKh5JO3AaLU.pgp
Description: PGP signature