Re: Problem with wireless card
On Sun, 2002-12-08 at 04:31, Martin Hermanowski wrote:
> On Sat, Dec 07, 2002 at 04:26:40PM +0100, Riccardo Gusso wrote:
> > I have a strange problem with my wireless pcmcia card ZyAir b -100.
> > I am using this confugration for it in /etc/pcmcia/config:
> >
> > card "Zyxel ZyAir B-100"
> > manfid 0x0274, 0x1613
> > bind "orinoco_cs"
> >
> > The card works, but sometimes it hangs up and I receive this message in
> > console:
> > eth1: Error -110 writing TX descricptor to BAP
>
> My card (prism2.5 mini_pci in a TP A30) has the same problem. It happens
> when I tranfer much data.
>
> As I do not have problems using an other prism2 card (from SMC), I
> suspect this is a firmware problem. I posted the same question to the
> linux-wlan list but got no reply :-|
>
> What does the driver say about the firmware?
> | kernel: eth1: Looks like an Intersil firmware version 1.03
I see the same problem with kernels more recent than 2.4.17 with my
D-Link DWL-650.
This card is likewise recognised as "eth1: Looks like an Intersil
firmware version 1.03".
As a result I have remained on 2.4.17 for some time now...
I have seen a suggestion elsewhere that it is possible to burn new
firmware into these cards, and that the DWL-650 (and possibly others)
have crappy firmware.
Regards,
Andrew.
--
---------------------------------------------------------------------
Andrew @ Catalyst .Net.NZ Ltd, PO Box 11-053, Manners St, Wellington
WEB: http://catalyst.net.nz/ PHYS: Level 2, 150-154 Willis St
DDI: +64(4)916-7201 MOB: +64(21)635-694 OFFICE: +64(4)499-2267
Survey for nothing with http://survey.net.nz/
---------------------------------------------------------------------
Reply to: