Adaptec SlimSCSI 1480B, invalid parameter parm_reset
Hallo,
I tried to use the Adaptec SlimSCSI 1480B on my Acer Travelmate 522TXV.
I installed the pcmcia_cs module and added the line:
module "apa1480_cb" opts "reset=1 ultra=1"
to /etc/pcmcia/config.opts
When I insert the card I got a high and a low beep, which means that the
card was detected but not configered successfully. In /var/log/daemon.log is
writen:
Apr 11 10:22:19 poseidon cardmgr[171]: exiting
Apr 11 10:23:15 poseidon cardmgr[154]: watching 2 sockets
Apr 11 10:23:15 poseidon cardmgr[155]: starting, version is 3.1.33
Apr 11 10:23:15 poseidon kerneld: started, pid=163, qid=0
Apr 11 10:23:27 poseidon apmd[222]: Version 3.0final (APM BIOS 1.2, Linux
driver 1.13)
Apr 11 10:23:27 poseidon apmd[222]: Battery: * * * (98% unknown)
Apr 11 10:23:28 poseidon mserver[250]: maxfd: 256
Apr 11 10:23:28 poseidon mserver[250]: Select on socket descriptors
Apr 11 10:25:10 poseidon cardmgr[155]: socket 0: Adaptec APA-1480 SCSI Host
Adapter
Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'modprobe cb_enabler'
Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'modprobe apa1480_cb reset=1
ultra=1'
Apr 11 10:25:10 poseidon cardmgr[155]: +
/lib/modules/2.2.19/pcmcia/apa1480_cb.o: invalid parameter parm_reset
Apr 11 10:25:10 poseidon cardmgr[155]: +
/lib/modules/2.2.19/pcmcia/apa1480_cb.o: insmod
/lib/modules/2.2.19/pcmcia/apa1480_cb.o failed
Apr 11 10:25:10 poseidon cardmgr[155]: +
/lib/modules/2.2.19/pcmcia/apa1480_cb.o: insmod apa1480_cb failed
Apr 11 10:25:10 poseidon cardmgr[155]: modprobe exited with status 255
Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'insmod
/lib/modules/2.2.19/pcmcia/apa1480_cb.o reset=1 ultra=1'
Apr 11 10:25:10 poseidon cardmgr[155]: +
/lib/modules/2.2.19/pcmcia/apa1480_cb.o: invalid parameter parm_reset
Apr 11 10:25:10 poseidon cardmgr[155]: insmod exited with status 1
Apr 11 10:25:11 poseidon cardmgr[155]: get dev info on socket 0 failed:
Resource temporarily unavailable
Apr 11 10:25:11 poseidon cardmgr[155]: wrong module 'apa1480_cb' for device
'apa1480_cb'?
Has somebody any ideas?
Thank you,
Alex.
--
To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: