Adaptec SlimSCSI 1480B, invalid parameter parm_reset
Hallo,
I have a Laptop Acer Travelmate 522TXV and Linux Debian
installed. Now I tried to install the SCSI Adaptercard for a
PCMCIA-socket (Adaptec SlimSCSI 1480B). For this a installed the
pcmcia-cs-3.1.33 module and added the following line in
/etc/pcmcia/config.opts :
module "apa1480_cb" opts "reset=1 ultra=1"
When I insert the card I got a high and a low beep, which means that the card
was detected but not configured successfully.
In /var/lib/pcmcia/stab:
Socket 0: Adaptec APA-1480 SCSI Host Adapter
Socket 1: empty
and in /var/log/daemon.log there is the following failure message:
> Apr 11 10:22:19 poseidon cardmgr[171]: exiting
> Apr 11 10:23:15 poseidon cardmgr[154]: watching 2 sockets
> Apr 11 10:23:15 poseidon cardmgr[155]: starting, version is 3.1.33
> Apr 11 10:23:15 poseidon kerneld: started, pid=163, qid=0
> Apr 11 10:23:27 poseidon apmd[222]: Version 3.0final (APM BIOS 1.2, Linux
> driver 1.13)
> Apr 11 10:23:27 poseidon apmd[222]: Battery: * * * (98% unknown)
> Apr 11 10:23:28 poseidon mserver[250]: maxfd: 256
> Apr 11 10:23:28 poseidon mserver[250]: Select on socket descriptors
> Apr 11 10:25:10 poseidon cardmgr[155]: socket 0: Adaptec APA-1480 SCSI Host
> Adapter
> Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'modprobe cb_enabler'
> Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'modprobe apa1480_cb
reset=1
> ultra=1'
> Apr 11 10:25:10 poseidon cardmgr[155]: +
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o: invalid parameter parm_reset
> Apr 11 10:25:10 poseidon cardmgr[155]: +
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o: insmod
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o failed
> Apr 11 10:25:10 poseidon cardmgr[155]: +
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o: insmod apa1480_cb failed
> Apr 11 10:25:10 poseidon cardmgr[155]: modprobe exited with status 255
> Apr 11 10:25:10 poseidon cardmgr[155]: executing: 'insmod
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o reset=1 ultra=1'
> Apr 11 10:25:10 poseidon cardmgr[155]: +
> /lib/modules/2.2.19/pcmcia/apa1480_cb.o: invalid parameter parm_reset
> Apr 11 10:25:10 poseidon cardmgr[155]: insmod exited with status 1
> Apr 11 10:25:11 poseidon cardmgr[155]: get dev info on socket 0 failed:
> Resource temporarily unavailable
> Apr 11 10:25:11 poseidon cardmgr[155]: wrong module 'apa1480_cb' for device
> 'apa1480_cb'?
>
Has anybody any ideas?
Thanks and regards,
Alex.
--
To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: