Re: pcmcia-network problem
`route -n` might might help...
ilia.
----- Original Message -----
From: "Michael Merting" <techorix@splatt.spline.inf.fu-berlin.de>
To: <debian-laptop@lists.debian.org>
Sent: Friday, December 07, 2001 3:28 PM
Subject: pcmcia-network problem
> hi,
> well now ifconfig shows me all the right parameters it should show and my
network card is blinking a lot when i try to ping someone but still I cannot
reach the net (no ping comes back).
> Plz have a look at my config-files.
> best regards,
> michael
>
> ps sorry for the long file... didn't want to use lame attachments
>
> CARDCTCL ident output:
> Socket 1:
> product info: "Xircom", "CreditCard 10/100", "CE3-10/100", "1.00"
> manfid: 0x0105, 0x010a
> function: 6 (network)
>
> IFCONFIG-output:
> eth0 Link encap:Ethernet HWaddr 00:80:C7:3F:4A:26
> inet addr:160.45.117.144 Bcast:160.45.117.159
Mask:255.255.255.224
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:351 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:3 Base address:0x300
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:337 errors:0 dropped:0 overruns:0 frame:0
> TX packets:337 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
> /etc/pcmcia/network - file
> #! /bin/sh
> #
> # network 1.77 2000/10/26 16:26:50 (David Hinds)
> #
> # Initialize or shutdown a PCMCIA ethernet adapter
> #
> # This script should be invoked with two arguments. The first is the
> # action to be taken, either "start", "stop", or "restart". The
> # second is the network interface name.
> #
> # The script passes an extended device address to 'network.opts' in
> # the ADDRESS variable, to retrieve device-specific configuration
> # options. The address format is "scheme,socket,instance,hwaddr"
> # where "scheme" is the current PCMCIA device configuration scheme,
> # "socket" is the socket number, "instance" is used to number multiple
> # interfaces in a single socket, and "hwaddr" is the card's hardware
> # ethernet address.
> #
>
> if [ -r ./shared ] ; then . ./shared ; else . /etc/pcmcia/shared ; fi
>
> # Get device attributes
> get_info $DEVICE
> HWADDR=`/sbin/ifconfig $DEVICE | sed -n -e 's/.*addr \([^ ]*\) */\1/p'`
>
> # Load site-specific settings
> ADDRESS="$SCHEME,$SOCKET,$INSTANCE,$HWADDR"
> start_fn () { return; }
> stop_fn () { return; }
> . $0.opts
>
> RESOLV=/etc/resolv.conf
>
> # Now, run the specific script for Wireless LAN interfaces
> # Note : we need the wireless parameters to be set up before IP
parameters,
> # so that we can perform DHCP over the Wireless link if needed. Jean II
> #if [ -x ./wireless ] ; then
> # . ./wireless
> #else
> # . /etc/pcmcia/wireless
> #fi
>
> match () { case $1 in $2) return 0; ;; *) return 1; ;; esac ; }
> bootp_setup ()
> {
> if match `uname -r` "2.[2-9].*" ; then
> /sbin/ifconfig $DEVICE up
> else
> /sbin/ifconfig $DEVICE up 0.0.0.0
> /sbin/route add default dev $DEVICE netmask 0.0.0.0
> fi
> }
>
> case "$ACTION" in
>
> 'start')
>
> test "$IF_PORT" && /sbin/ifport $DEVICE $IF_PORT
>
> if is_true $PUMP ; then
> /sbin/pump -i $DEVICE > /dev/null
> elif is_true $BOOTP ; then
> bootp_setup
> if [ -x /sbin/bootpc ] ; then
> eval `/sbin/bootpc --bootfile '' --returniffail \
> --timeoutwait 10 --dev $DEVICE`
> /sbin/ifconfig $DEVICE down
> if [ "$GATEWAYS" ] ; then
> set - $GATEWAYS ; GATEWAY=$1
> fi
> elif [ -x /sbin/pump ] ; then
> /sbin/pump -i $DEVICE > /dev/null
> else
> exit 1
> fi
> elif is_true $DHCP || is_true $DHCLIENT ; then
> bootp_setup
> HN=${DHCP_HOSTNAME:+-h $DHCP_HOSTNAME}
> if [ -x /sbin/dhcpcd ] ; then
> # This is a version check: I know it looks weird
> if /sbin/dhcpcd -XYZZY 2>&1 | grep -q DHCP ; then
> /sbin/dhcpcd -d $HN $DEVICE >/dev/null 2>&1 || exit 1
> else
> # Jump through hoops for lame 0.70-era dhcpcd
> L=/var/run/dhcp-lock-$DEVICE
> /bin/echo "#!/bin/sh\nrm $L" > $L ; chmod +x $L
> /sbin/dhcpcd $HN -c $L $DEVICE >/dev/null 2>&1
> for t in 0 1 2 3 4 5 6 7 8 9 ; do
> sleep 2 ; if [ ! -e $L ] ; then break ; fi
> done
> rm -f $L
> if [ -e /etc/dhcpc/resolv.conf ] ; then
> echo "# $DEVICE begin" > $RESOLV.N
> cat /etc/dhcpc/resolv.conf >> $RESOLV.N
> echo "# $DEVICE end" >> $RESOLV.N
> cat $RESOLV >> $RESOLV.N ; mv $RESOLV.N $RESOLV
> fi
> fi
> elif [ -x /sbin/dhclient ] ; then
> /sbin/dhclient $DEVICE >/dev/null 2>&1 || exit 1
> elif [ -x /sbin/pump ] ; then
> /sbin/pump $HN -i $DEVICE > /dev/null
> else
> exit 1
> fi
> fi
>
> if [ "$IPADDR" ] ; then
> # Basic network setup
> NM=${NETMASK:+netmask $NETMASK}
> BC=${BROADCAST:+broadcast $BROADCAST}
> MTU=${MTU:+mtu $MTU}
> /sbin/ifconfig $DEVICE up $IPADDR $NM $BC $MTU
> if [ "$NETWORK" ] ; then
> /sbin/ifuser $DEVICE $NETWORK || \
> /sbin/route add -net $NETWORK $NM dev $DEVICE
> elif [ "$GATEWAY" ] ; then
> /sbin/ifuser $DEVICE $GATEWAY || \
> /sbin/route add $GATEWAY $DEVICE
> fi
> test "$GATEWAY" && /sbin/route add default gw $GATEWAY metric 1
> fi
>
> # Update DNS stuff
> if [ "$DOMAIN$SEARCH$DNSSRVS$DNS_1$DNS_2$DNS_3" ] ; then
> echo "# $DEVICE begin" > $RESOLV.N
> test "$DOMAIN" && echo "domain $DOMAIN" >> $RESOLV.N
> test "$SEARCH" && echo "search $SEARCH" >> $RESOLV.N
> for DNS in ${DNSSRVS:-$DNS_1 $DNS_2 $DNS_3} ; do
> echo "nameserver $DNS" >> $RESOLV.N
> done
> echo "# $DEVICE end" >> $RESOLV.N
> sed -e "/# $DEVICE begin/,/# $DEVICE end/d" $RESOLV >> $RESOLV.N
> mv $RESOLV.N $RESOLV
> fi
>
> # Handle NFS mounts
> if [ "$MOUNTS" ] ; then
> for MT in $MOUNTS ; do mount -v $MT ; done
> fi
>
> if [ "$IPX_NETNUM" ] ; then
> ipx_interface add $DEVICE $IPX_FRAME $IPX_NETNUM
> fi
>
> if test -x /usr/sbin/ipmasq && is_true "$IPMASQ" ; then
> /usr/sbin/ipmasq
> fi
>
> start_fn $DEVICE
> ;;
>
> 'stop')
>
> stop_fn $DEVICE
>
> if is_true $PUMP || is_true $BOOTP || is_true $DHCP \
> || is_true $DHCLIENT || [ "$IPADDR" ] ; then
>
> # Shut down all NFS mounts on this interface
> nfsstop ()
> {
> local HOST MT
> if read HOST MT ; then
> nfsstop
> if /sbin/ifuser $DEVICE $HOST ; then
> do_fuser -k -m $MT > /dev/null
> umount -v $MT
> fi
> fi
> }
> mount | fgrep 'type nfs' | sed -e 's/:.* on \(.*\) type .*/ \1/' | nfsstop
>
> test "$IPX_NETNUM" && ipx_interface del $DEVICE $IPX_FRAME
>
> # Remove nameservers
> if fgrep -q "# $DEVICE begin" $RESOLV ; then
> sed -e "/# $DEVICE begin/,/# $DEVICE end/d" $RESOLV > $RESOLV.N
> mv $RESOLV.N $RESOLV
> fi
>
> if is_true $PUMP ; then
> /sbin/pump -r -i $DEVICE
> elif is_true $DHCP ; then
> if [ -x /sbin/dhcpcd -a -f /var/run/dhcpcd-$DEVICE.pid ] ; then
> kill -TERM `cat /var/run/dhcpcd-$DEVICE.pid`
> sleep 2
> /sbin/dhcpcd -XYZZY 2>&1 | grep -q DHCP || \
> rm -f /var/run/dhcpcd-$DEVICE.pid
> elif [ -x /sbin/dhclient ] ; then
> kill -TERM `cat /var/run/dhclient.pid`
> elif [ -x /sbin/pump ] ; then
> /sbin/pump -r -i $DEVICE
> fi
> fi
> fi
> /sbin/ifconfig $DEVICE down
> ;;
>
> 'check')
> is_true $NO_CHECK && exit 0
> /sbin/ifconfig $DEVICE | grep -q RUNNING || exit 0
>
> # Check for any in-use NFS mounts
> nfscheck ()
> {
> while read HOST MT ; do
> /sbin/ifuser $DEVICE $HOST && do_fuser -sm $MT && exit 1
> done
> }
> mount | fgrep 'type nfs' | sed -e 's/:.* on \(.*\) type .*/ \1/' |
nfscheck
>
> # Check for active TCP or UDP connections
> getdests ()
> {
> IFS=" :" ; read A ; read A
> while read A B C D E HOST PORT STATE ; do
> if [ "$STATE" != "FIN_WAIT1" -a "$STATE" != "FIN_WAIT2" \
> -a "$STATE" != "CLOSE_WAIT" -a "$STATE" != "TIME_WAIT" \
> -a "$HOST" != "127.0.0.1" -a "$HOST" != "0.0.0.0" \
> -a "$STATE" != "CLOSE" -a "$PORT" != "*" ] ; then\
> echo $HOST
> fi
> done
> }
> DESTS=`netstat -ntuw | getdests`
> /sbin/ifuser $DEVICE $DESTS && exit 1
> ;;
>
> 'cksum')
> if [ $WIRELESS = 1 ] ; then exit 1 ; fi
> chk_simple "$NEW_SCHEME,$SOCKET,$INSTANCE,$HWADDR" || exit 1
> ;;
>
> 'restart')
> test "$IPADDR" && /sbin/ifconfig $DEVICE down up
> ;;
>
> 'suspend'|'resume')
> ;;
>
> *)
> usage
> ;;
>
> esac
>
> exit 0
> /etc/pcmcia/network.opts - file
> # NOTE: This file was generated automatically by the pcnetconfig script.
> # Network adapter configuration
> #
> # The address format is "scheme,socket,instance,hwaddr".
> #
> # Note: the "network address" here is NOT the same as the IP address.
> # See the Networking HOWTO. In short, the network address is the IP
> # address masked by the netmask.
> #
> case "$ADDRESS" in
> *,*,*,00:60:1D:*|*,*,*,00:02:2D:*)
> INFO="techorix"
> # Transceiver selection, :for some cards -- see 'man ifport'
> IF_PORT=""
> # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
> BOOTP="n"
> # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
> DHCP="n"
> # If you need to explicitly specify a hostname for DHCP requests
> #DHCP_HOSTNAME=""
> # Host's IP address, netmask, network address, broadcast address
> IPADDR="160.45.117.144"
> NETMASK="255.255.255.224"
> NETWORK=""
> BROADCAST="160.45.117.159"
> # Gateway address for static routing
> GATEWAY="160.45.117.129"
> # Things to add to /etc/resolv.conf for this interface
> DOMAIN=""
> SEARCH="spline.inf.fu-berlin.de inf.fu-berlin.de fu-berlin.de"
> # The nameserver IP addresses specified here complement the
> # nameservers already defined in /etc/resolv.conf. These nameservers
> # will be added to /etc/resolv.conf automatically when the PCMCIA
> # network connection is established and removed from this file when
> # the connection is broken.
> DNS_1="160.45.117.134"
> DNS_2=""
> DNS_3=""
> # NFS mounts, should be listed in /etc/fstab
> MOUNTS=""
> # If you need to override the interface's MTU...
> MTU=""
> # For IPX interfaces, the frame type and network number
> IPX_FRAME=""
> IPX_NETNUM=""
> # Run ipmasq? [y/n] (see the Debian ipmasq package)
> IPMASQ="n"
> # Extra stuff to do after setting up the interface
> start_fn () { return; }
> # Extra stuff to do before shutting down the interface
> stop_fn () { return; }
> # Card eject policy options
> NO_CHECK="n"
> NO_FUSER="n"
> ;;
>
> *,*,*,*)
> INFO="Sample private network setup for normal network pcmcia card"
> # Transceiver selection, for some cards -- see 'man ifport'
> IF_PORT=""
> # Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
> BOOTP="n"
> # Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
> DHCP="n"
> # If you need to explicitly specify a hostname for DHCP requests
> DHCP_HOSTNAME=""
> # Host's IP address, netmask, network address, broadcast address
> IPADDR="160.45.117.144"
> NETMASK="255.255.255.224"
> #NETWORK="192.168.0.0"
> BROADCAST="160.45.117.159"
> # Gateway address for static routing
> GATEWAY="160.45.117.129"
> # Things to add to /etc/resolv.conf for this interface
> DOMAIN=""
> SEARCH=""
> # The nameserver IP addresses specified here complement the
> # nameservers already defined in /etc/resolv.conf. These nameservers
> # will be added to /etc/resolv.conf automatically when the PCMCIA
> # network connection is established and removed from this file when
> # the connection is broken.
> DNS_1="160.45.117.134"
> DNS_2=""
> DNS_3=""
> # NFS mounts, should be listed in /etc/fstab
> MOUNTS=""
> # If you need to override the interface's MTU...
> MTU=""
> # For IPX interfaces, the frame type and network number
> IPX_FRAME=""
> IPX_NETNUM=""
> # Run ipmasq? [y/n] (see the Debian ipmasq package)
> IPMASQ="n"
> # Extra stuff to do after setting up the interface
> start_fn () { return; }
> # Extra stuff to do before shutting down the interface
> stop_fn () { return; }
> # Card eject policy options
> NO_CHECK="n"
> NO_FUSER="n"
> ;;
> esac
>
> # This tries to use Debian's network setup in /etc/network/interfaces
> # if no settings are given higher up in this file. You can delete it
> # if that isn't desired.
>
> #is_true $PUMP || is_true $BOOTP || is_true $DHCP || is_true $DHCLIENT ||
\
> #if [ ! "$IPADDR" -a -f /etc/network/interfaces ] ; then
> #INFO="Debian network setup"
> #start_fn () {
> #log /sbin/ifup $1
> #}
> #stop_fn () {
> #log /sbin/ifdown $1
> #}
> #fi
> /etc/pcmcia/config.opts - file
> #
> # Local PCMCIA Configuration File
> #
> #----------------------------------------------------------------------
>
> # System resources available for PCMCIA devices
>
> include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
> include memory 0xc0000-0xfffff
> include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
>
> # High port numbers do not always work...
> # include port 0x1000-0x17ff
>
> # Extra port range for IBM Token Ring
> include port 0xa00-0xaff
>
> # Resources we should not use, even if they appear to be available
>
> # First built-in serial port
> exclude irq 4
> # Second built-in serial port
> #exclude irq 3
> # First built-in parallel port
> exclude irq 7
>
> #----------------------------------------------------------------------
>
> # Examples of options for loadable modules
>
> # To fix sluggish network with IBM ethernet adapter...
> #module "pcnet_cs" opts "mem_speed=600"
>
> # Options for IBM Token Ring adapters
> #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"
>
> # Options for Raylink/WebGear driver: uncomment only one line...
> # Generic ad-hoc network
> module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256
translate=1"
> # Infrastructure network for older cards
> #module "ray_cs" opts "net_type=1 essid=ESSID1"
> # Infrastructure network for WebGear
> #module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128
beacon_period=256"
>
> # Options for WaveLAN/IEEE driver (AccessPoint mode)...
> #module "wvlan_cs" opts "station_name=MY_PC"
> # Options for WaveLAN/IEEE driver (ad-hoc mode)...
> #module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"
>
> # Options for Xircom Netwave driver...
> #module "netwave_cs" opts "domain=0x100 scramble_key=0x0"
>
> /etc/pcmcia/config - file
> #
> # PCMCIA Card Configuration Database
> #
> # config 1.145 2000/11/07 21:20:05 (David Hinds)
> #
>
> # config.opts is now included at the very end
>
> #
> # Device driver definitions
> #
> device "3c589_cs"
> class "network" module "3c589_cs"
>
> device "ibmtr_cs"
> class "network" module "ibmtr_cs"
>
> device "nmclan_cs"
> class "network" module "nmclan_cs"
>
> device "oti12_cs"
> class "cdrom" module "oti12_cs"
>
> # Debian note: module 8390.o has been moved from the net subdirectory
> # to the pcmcia subdirectory
> device "pcnet_cs"
> class "network" module "8390", "pcnet_cs"
>
> device "smc91c92_cs"
> class "network" module "smc91c92_cs"
>
> device "wavelan_cs"
> class "network" module "wavelan_cs"
>
> device "wvlan_cs"
> class "network" module "wvlan_cs"
>
> device "memory_cs" needs_mtd
> class "memory" module "memory_cs"
>
> device "ftl_cs" needs_mtd
> class "ftl" module "ftl_cs"
>
> device "serial_cs"
> class "serial" module "serial_cs"
>
> device "parport_cs"
> class "parport" module "parport_cs"
>
> device "qlogic_cs"
> class "scsi" module "qlogic_cs"
>
> device "aha152x_cs"
> class "scsi" module "aha152x_cs"
>
> device "fdomain_cs"
> class "scsi" module "fdomain_cs"
>
> device "sym53c500_cs"
> class "scsi" module "sym53c500_cs"
>
> device "ide_cs"
> class "ide" module "ide_cs"
>
> device "fmvj18x_cs"
> class "network" module "fmvj18x_cs"
>
> device "netwave_cs"
> class "network" module "netwave_cs"
>
> device "xirc2ps_cs"
> class "network" module "xirc2ps_cs"
>
> device "iscc_cs"
> class "iscc" module "iscc_cs"
>
> device "3c574_cs"
> class "network" module "3c574_cs"
>
> device "teles_cs"
> class "teles" module "teles_cs"
>
> device "3c575_cb"
> class "network" module "cb_enabler", "3c575_cb"
>
> device "apa1480_cb"
> class "scsi" module "cb_enabler", "apa1480_cb"
>
> device "tulip_cb"
> class "network" module "cb_enabler", "tulip_cb"
>
> device "memory_cb"
> class "memory" module "cb_enabler", "memory_cb"
>
> device "epic_cb"
> class "network" module "cb_enabler", "epic_cb"
>
> device "eepro100_cb"
> class "network" module "cb_enabler", "eepro100_cb"
>
> device "serial_cb"
> class "serial" module "cb_enabler", "serial_cb"
>
> device "ray_cs"
> class "network" module "ray_cs"
>
> device "airo_cs"
> class "network" module "airo", "airo_cs"
>
> device "pcilynx_cb"
> class "ieee1394" module "cb_enabler", "pcilynx_cb"
>
> #
> # Ethernet adapter definitions
> #
> card "2412LAN Ethernet"
> version "2412LAN"
> bind "pcnet_cs"
>
> card "3Com 589 Ethernet"
> manfid 0x0101, 0x0589
> bind "3c589_cs"
>
> card "Access/CARD Ethernet"
> version "UBKK,V2.0"
> bind "fmvj18x_cs"
>
> card "Accton EN2212 Ethernet"
> version "ACCTON", "EN2212"
> bind "pcnet_cs"
>
> card "Accton EN2216 Ethernet"
> version "ACCTON", "EN2216-PCMCIA-ETHERNET"
> bind "pcnet_cs"
>
> card "Accton UE2212 Ethernet"
> version "PCMCIA", "UE2212"
> bind "pcnet_cs"
>
> card "Accton UE2216 Ethernet"
> version "PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216"
> bind "pcnet_cs"
>
> card "Allied Telesis LA-PCM Ethernet"
> manfid 0xc00f, 0x0002
> cis "cis/LA-PCM.dat"
> bind "pcnet_cs"
>
> card "AmbiCom AMB8002 Ethernet"
> version "AmbiCom Inc", "AMB8002"
> bind "pcnet_cs"
>
> card "AmbiCom AMB8002T Ethernet"
> version "AmbiCom Inc", "AMB8002T"
> bind "pcnet_cs"
>
> card "AmbiCom AMB8010 Ethernet"
> version "AmbiCom Inc", "AMB8010"
> bind "pcnet_cs"
>
> card "AnyCom ECO Ethernet"
> version "AnyCom", "ECO Ethernet"
> bind "pcnet_cs"
>
> card "Argosy EN210 Ethernet"
> version "PCMCIA LAN", "Ethernet"
> bind "pcnet_cs"
>
> card "Asante FriendlyNet Ethernet"
> version "ASANTE", "FriendlyNet PC Card"
> bind "pcnet_cs"
>
> card "Billionton LNT-10TB"
> version "Billionton", "LNT-10TB"
> bind "pcnet_cs"
>
> card "Billionton LNT-10TN"
> version "PCMCIA", "LNT-10TN"
> bind "pcnet_cs"
>
> card "California Access Ethernet"
> version "PCMCIAs", "ComboCard"
> bind "pcnet_cs"
>
> card "CeLAN Ethernet"
> version "PCMCIA", "ETHERNET V1.0"
> bind "pcnet_cs"
>
> card "CentreCOM LA-PCM V2 Ethernet"
> version "Allied Telesis, K.K.", "CentreCOM LA-PCM_V2"
> bind "pcnet_cs"
>
> card "CNet CN30BC Ethernet"
> version "CNet ", "CN30BC", "ETHERNET"
> bind "pcnet_cs"
>
> card "CNet CN40BC Ethernet"
> version "CNet", "CN40BC Ethernet"
> bind "pcnet_cs"
>
> card "Compaq Ethernet"
> version "Compaq", "Ethernet LAN Card"
> bind "xirc2ps_cs"
>
> card "Compaq Netelligent 10/100 Ethernet"
> version "Compaq", "Netelligent 10/100 PC Card"
> bind "xirc2ps_cs"
>
> card "COMPU-SHACK BASEline Ethernet"
> version "COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter"
> bind "pcnet_cs"
>
> card "Connectware LANdingGear Ethernet"
> manfid 0x0057, 0x1004
> bind "pcnet_cs"
>
> card "CONTEC Ethernet"
> version "CONTEC Co.,Ltd."
> bind "fmvj18x_cs"
>
> card "Corega PCC-T Ethernet"
> version "corega K.K.", "corega Ether PCC-T"
> bind "pcnet_cs"
>
> card "Corega PCC-T Ethernet"
> version "corega K.K.", "corega EtherII PCC-T"
> bind "pcnet_cs"
>
> card "Corega PCC-T EthernetII"
> version "corega K.K.", "corega EtherII PCC-T"
> bind "pcnet_cs"
>
> card "Corega PCC-T Ethernet"
> version "corega,K.K.", "Ethernet LAN Card"
> bind "pcnet_cs"
>
> card "Corega PCM-T Ethernet"
> version "Corega,K.K.", "Ethernet LAN Card"
> bind "pcnet_cs"
>
> card "CyQ've 10baseT Ethernet"
> version "CyQ've 10 Base-T LAN CARD"
> bind "pcnet_cs"
>
> card "CyQ've ELA-010 Ethernet"
> version "CyQ've", "ELA-010"
> bind "pcnet_cs"
>
> card "Danpex EN-6200P2 Ethernet"
> version "*", "EN-6200P2"
> bind "pcnet_cs"
>
> card "DataTrek NetCard Ethernet"
> version "DataTrek.", "NetCard "
> bind "pcnet_cs"
>
> card "Dayna Commnunications CommuniCard E Ethernet"
> version "Dayna Communications, Inc.", "CommuniCard E"
> bind "pcnet_cs"
>
> card "Digital DEPCM-BA Ethernet"
> version "DIGITAL", "DEPCM-XX"
> bind "pcnet_cs"
>
> card "Digital PCP78-AC Ethernet"
> version "Digital", "Ethernet", "Adapter"
> bind "pcnet_cs"
>
> card "D-Link DE-650 Ethernet"
> version "D-Link", "DE-650"
> bind "pcnet_cs"
>
> card "D-Link DFE-650 Ethernet"
> version "D-Link", "DFE-650"
> bind "pcnet_cs"
>
> card "D-Link DE-660 Ethernet"
> version "D-Link", "DE-660"
> bind "pcnet_cs"
>
> card "D-Link DE-660+ Ethernet"
> version "D-Link", "DE-660+"
> bind "pcnet_cs"
>
> card "D-Link DE-650 Ethernet"
> tuple 0x40, 0x0009, "D-Link PC Ethernet Card"
> bind "pcnet_cs"
>
> card "DynaLink L10C Ethernet"
> version "DYNALINK", "L10C"
> bind "pcnet_cs"
>
> card "E2000 NE2000-Compatible Ethernet"
> version "Ethernet Adapter", "E2000 PCMCIA Ethernet"
> bind "pcnet_cs"
>
> card "Eagle NE200 Ethernet"
> manfid 0x0004, 0x0004
> bind "fmvj18x_cs"
>
> card "Edimax Ethernet Combo"
> version "Edimax Technology Inc.", "PCMCIA", "Ethernet Card"
> bind "pcnet_cs"
>
> card "EFA 207 Ethernet"
> version "EFA ", "EFA207", "ETHERNET"
> bind "pcnet_cs"
>
> card "Eiger Labs EPX-ET10T2 Ethernet"
> version "EIGER Labs Inc.", "Ethernet Combo card"
> bind "pcnet_cs"
>
> card "Eiger Labs EPX-ET10BT Ethernet"
> version "EIGER Labs Inc.", "Ethernet 10BaseT card"
> bind "pcnet_cs"
>
> card "Eiger Labs EPX-10BT Ethernet"
> version "Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT"
> bind "fmvj18x_cs"
>
> card "Eiger Labs EPX-ET 10BT Ethernet"
> version "Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT"
> bind "fmvj18x_cs"
>
> card "ELECOM Laneed LD-CDF"
> version "Laneed", "LD-CDF"
> bind "pcnet_cs"
>
> card "EZLink 4109 Ethernet"
> version "PCMCIA", "Ethernet Card"
> bind "pcnet_cs"
>
> card "EP-210 Ethernet"
> version "Ethernet PCMCIA adapter", "EP-210"
> bind "pcnet_cs"
>
> card "EP-210 Ethernet"
> version "EP-210 PCMCIA LAN CARD."
> bind "pcnet_cs"
>
> card "EP-220 Ethernet"
> version "PCMCIA", "ETHERNET"
> bind "pcnet_cs"
>
> card "Epson EEN10B Ethernet"
> version "Seiko Epson Corp.", "Ethernet"
> bind "pcnet_cs"
>
> card "Farallon ENet"
> version "Farallon", "ENet"
> bind "3c589_cs"
>
> card "Fujitsu FMV-J181 Ethernet"
> version "PCMCIA MBH10302"
> bind "fmvj18x_cs"
>
> card "Fujitsu FMV-1080 Ethernet"
> version "FUJITSU", "MBH10308"
> bind "fmvj18x_cs"
>
> card "Fujitsu FMV-J182 Ethernet"
> version "FUJITSU", "LAN Card(FMV-J182)"
> bind "fmvj18x_cs"
>
> card "Fujitsu Towa LA501 Ethernet"
> version "FUJITSU TOWA", "LA501"
> bind "fmvj18x_cs"
>
> card "Grey Cell GCS2000 Ethernet"
> version "Grey Cell", "GCS2000"
> bind "pcnet_cs"
>
> card "Grey Cell GCS2220 Ethernet"
> version "Grey Cell", "GCS2220"
> bind "pcnet_cs"
>
> card "GVC NIC-2000P Ethernet"
> version "GVC", "NIC-2000p"
> bind "pcnet_cs"
>
> card "GVC NIC-2000P Ethernet"
> version "PCMCIA", "Ethernet Combo card"
> bind "pcnet_cs"
>
> card "Hitachi HT-4840-11 Ethernet"
> version "HITACHI", "HT-4840-11"
> bind "fmvj18x_cs"
>
> card "Hypertec EP401 Ethernet"
> version "Hypertec", "*", "EP401"
> bind "pcnet_cs"
>
> card "IBM Credit Card Ethernet"
> version "IBM Corp.", "Ethernet"
> bind "pcnet_cs"
>
> card "IC-Card Ethernet"
> version "IC-CARD", "IC-CARD"
> bind "pcnet_cs"
>
> card "IC-Card Plus Ethernet"
> version "IC-CARD+", "IC-CARD+"
> bind "pcnet_cs"
>
> card "Kansai KLA-PCM/T Ethernet"
> version "KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T"
> bind "pcnet_cs"
>
> card "Katron PE-520 Ethernet"
> version "KCI", "PE520 PCMCIA Ethernet Adapter"
> bind "pcnet_cs"
>
> card "KingMax Technology Ethernet"
> version "KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card"
> bind "pcnet_cs"
>
> card "KingMax Technology Ethernet"
> version "KingMax Technology Inc.", "*", "Ethernet Card"
> bind "pcnet_cs"
>
> card "KingMax Technology Ethernet"
> version "KINGMAX", "EN10T2T"
> bind "pcnet_cs"
>
> card "Kingston KNE-PCM/x Ethernet"
> version "Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter"
> bind "pcnet_cs"
>
> card "Kingston KNE-PC2 Ethernet"
> version "Kingston", "KNE-PC2"
> bind "pcnet_cs"
>
> card "KTI PE-520 Plus Ethernet"
> version "KTI", "PE520 PLUS"
> cis "cis/PE520.dat"
> bind "pcnet_cs"
>
> card "Linksys Ethernet"
> tuple 0x40, 0x0009, "E-CARD PC Ethernet Card"
> cis "cis/E-CARD.dat"
> bind "pcnet_cs"
>
> card "Linksys Ethernet"
> version "LINKSYS", "E-CARD"
> bind "pcnet_cs"
>
> card "Linksys Ethernet"
> version "E-CARD", "E-CARD"
> bind "pcnet_cs"
>
> card "Linksys Ethernet"
> version "Linksys", "Combo PCMCIA EthernetCard (EC2T)"
> bind "pcnet_cs"
>
> card "Longshine ShineNet LCS-8534 Ethernet"
> version "LONGSHINE", "PCMCIA Ethernet Card"
> bind "pcnet_cs"
>
> card "Longshine ShineNet LCS-8534 Ethernet"
> version "LONGSHINE", "*", "EP401"
> bind "pcnet_cs"
>
> card "Logitec LPM-LN10BA Ethernet"
> version "Cardwell", "PCMCIA", "ETHERNET"
> bind "pcnet_cs"
>
> card "Logitec LPM-LN20T Ethernet"
> version "Logitec", "LPM-LN20T"
> bind "pcnet_cs"
>
> card "MACNICA Ethernet"
> version "MACNICA", "ME1-JEIDA"
> bind "pcnet_cs"
>
> card "Maxtech PCN2000 Ethernet"
> version "MAXTECH", "PCN2000"
> bind "pcnet_cs"
>
> card "Megahertz CC10BT/2 Ethernet"
> version "Megahertz", "CC10BT/2"
> bind "smc91c92_cs"
>
> card "Melco LPC2-T Ethernet"
> manfid 0x01bf, 0x2216
> bind "pcnet_cs"
>
> card "Microdyne NE4200 Ethernet"
> version "Microdyne", "NE4200"
> bind "pcnet_cs"
>
> card "Midori LT-PCMT Ethernet"
> version "MIDORI ELEC.", "LT-PCMT"
> bind "pcnet_cs"
>
> card "National Semiconductor InfoMover 4100 Ethernet"
> version "National Semiconductor", "InfoMover 4100"
> bind "pcnet_cs"
>
> card "National Semiconductor InfoMover NE4100 Ethernet"
> version "National Semiconductor", "InfoMover NE4100"
> bind "pcnet_cs"
>
> card "NEC PC-9801N-J12 Ethernet"
> version "NEC", "PC-9801N-J12"
> bind "pcnet_cs"
>
> card "New Media Ethernet"
> version "New Media Corporation", "Ethernet"
> bind "nmclan_cs"
>
> card "New Media BASICS Ethernet"
> version "BASICS by New Media Corporation", "Ethernet", "SMC91C94"
> bind "smc91c92_cs"
>
> card "New Media LanSurfer"
> manfid 0x0057, 0x0021
> bind "pcnet_cs"
>
> card "NextCom NC5310 Ethernet"
> version "NextComK.K.", "NC5310 Ver1.0 "
> bind "fmvj18x_cs"
>
> card "NE2000 Compatible Ethernet"
> version "PCMCIA", "Ethernet"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Ethernet"
> version "PCMCIA", "Ethernet 10BaseT Card"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Ethernet"
> version "NE2000 Compatible"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Ethernet"
> version "Ethernet", "Adapter"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Ethernet"
> version "PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Ethernet"
> manfid 0x0149, 0xc1ab
> bind "pcnet_cs"
>
> card "NDC Instant-Link Ethernet"
> version "NDC", "Ethernet"
> cis "cis/NE2K.dat"
> bind "pcnet_cs"
>
> card "Novell Eagle 200T Ethernet"
> version "EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04"
> bind "fmvj18x_cs"
>
> card "Ositech Four of Diamonds Ethernet"
> version "Ositech", "Trumpcard:Four of Diamonds Ethernet"
> bind "smc91c92_cs"
>
> card "IO DATA PCLA/T Ethernet"
> version "I-O DATA", "PCLA", "ETHERNET"
> bind "pcnet_cs"
>
> card "IO DATA PCLA/TE Ethernet"
> version "IO DATA", "PCLATE", "ETHERNET"
> bind "pcnet_cs"
>
> card "Panasonic CF-VEL211 Ethernet"
> version "Matsushita Electric Industrial Co.,LTD.", "CF-VEL211"
> bind "pcnet_cs"
>
> card "Portable Add-ons Ethernet+"
> version "Portable Add-ons", "Ethernet+"
> bind "nmclan_cs"
>
> card "PreMax PE-200 Ethernet"
> version "PMX ", "PE-200"
> cis "cis/PE-200.dat"
> bind "pcnet_cs"
>
> card "PRETEC CompactLAN Ethernet"
> version "PRETEC", "Ethernet CompactLAN 10baseT 3.3V"
> bind "pcnet_cs"
>
> card "Psion Gold Card Ethernet"
> version "Psion Dacom", "Gold Card Ethernet"
> bind "pcnet_cs"
>
> card "Psion Gold Card Netglobal Ethernet"
> version "Psion", "10Mb Ethernet"
> bind "smc91c92_cs"
>
> card "RATOC Ethernet"
> version "PCMCIA LAN MBH10304 ES"
> bind "fmvj18x_cs"
>
> card "RATOC REX-R280 Ethernet"
> version "RATOC System Inc.", "10BASE_T CARD R280"
> bind "fmvj18x_cs"
>
> card "Relia RE2408T Ethernet"
> version "PCMCIA LAN", "Ethernet"
> bind "pcnet_cs"
>
> card "Reliasys 2400A Ethernet"
> version "=RELIA==", "Ethernet"
> bind "pcnet_cs"
>
> card "RPTI EP400 Ethernet"
> version "RPTI LTD.", "EP400"
> bind "pcnet_cs"
>
> card "RPTI EP400 Ethernet"
> version "RPTI", "EP400 Ethernet NE2000 Compatible"
> bind "pcnet_cs"
>
> card "RPTI EP401 Ethernet"
> version "RPTI", "EP401 Ethernet NE2000 Compatible"
> bind "pcnet_cs"
>
> card "RPTI 1625B Ethernet"
> version "RP", "1625B Ethernet NE2000 Compatible"
> bind "pcnet_cs"
>
> card "SCM Ethernet Combo"
> version "SCM", "Ethernet Combo card"
> bind "pcnet_cs"
>
> card "Sky Link Express"
> version "2408LAN", "Ethernet"
> bind "pcnet_cs"
>
> card "SMC EtherEZ Ethernet"
> version "SMC", "EtherEZ Ethernet 8020"
> bind "smc91c92_cs"
>
> card "SMC EZCard-10 Ethernet"
> version "SMC", "EZCard-10-PCMCIA"
> bind "pcnet_cs"
>
> card "Socket EA Ethernet"
> version "Socket Communications Inc",
> "Socket EA PCMCIA LAN Adapter Revision D"
> bind "pcnet_cs"
>
> card "Socket EA Ethernet"
> version "Socket Communications Inc",
> "Socket EA PCMCIA LAN Adapter Revision E"
> bind "pcnet_cs"
>
> card "Socket LP-E Ethernet"
> manfid 0x0104, 0x000d
> bind "pcnet_cs"
>
> card "Socket LP-E CF+ Ethernet"
> manfid 0x0104, 0x0075
> bind "pcnet_cs"
>
> card "SuperSocket Ethernet"
> version "Telecom Device K.K.", "SuperSocket RE450T"
> bind "pcnet_cs"
>
> card "Surecom Ethernet"
> version "TAMARACK", "Ethernet"
> cis "cis/tamarack.dat"
> bind "pcnet_cs"
>
> card "TDK LAC-CD02x Ethernet"
> version "TDK", "LAC-CD02x"
> bind "fmvj18x_cs"
>
> card "Xircom IIps Ethernet"
> version "Xircom", "*", "PS-CE2-10"
> bind "xirc2ps_cs"
>
> card "Xircom RE-10 Ethernet"
> version "Xircom", "*", "RE-10"
> bind "xirc2ps_cs"
>
> #
> # 10/100baseT network adapters
> #
> card "3Com 572/574 Fast Ethernet"
> manfid 0x0101, 0x0574
> bind "3c574_cs"
>
> card "Abocom LinkMate FE1000 Fast Ethernet"
> version "Fast Ethernet", "Adapter"
> bind "pcnet_cs"
>
> card "Accton Fast EtherCard-16"
> manfid 0x01bf, 0x010a
> bind "xirc2ps_cs"
>
> card "AmbiCom AMB8110 Fast Ethernet"
> manfid 0x021b, 0x0202
> bind "pcnet_cs"
>
> card "AnyCom ECO 10/100 Fast Ethernet"
> version "AnyCom", "ECO Ethernet 10/100"
> bind "pcnet_cs"
>
> card "Argosy EN220 Fast Ethernet"
> version "ARGOSY", "Fast Ethernet PCCard"
> bind "smc91c92_cs"
>
> card "Buffalo LPC3-CLX Fast Ethernet"
> manfid 0x026f, 0x0301
> bind "pcnet_cs"
>
> card "COMPU-SHACK FASTline 10/100 Fast Ethernet"
> version "COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet"
> bind "pcnet_cs"
>
> card "Corega PCC-TX Fast Ethernet"
> version "corega K.K.", "corega FastEther PCC-TX"
> bind "pcnet_cs"
>
> card "D-Link Fast Ethernet"
> version "ETHER-C16"
> bind "pcnet_cs"
>
> card "Dynalink L100C Fast Ethernet"
> version "DYNALINK", "L100C"
> bind "smc91c92_cs"
>
> card "EXP ThinLan-110 Fast Ethernet"
> version "PCMCIA", "Fast Ethernet PCCard"
> bind "smc91c92_cs"
>
> card "Farallon Enet"
> version "Farallon", "Farallon Enet"
> bind "smc91c92_cs"
>
> card "Intel EtherExpress PRO/100"
> version "Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"
> bind "xirc2ps_cs"
>
> card "IO DATA PCET/TX Fast Ethernet"
> version "IO DATA", "PCETTX"
> bind "pcnet_cs"
>
> card "Laneed LD-10/100CD Fast Ethernet"
> version "Laneed", "LD-10/100CD"
> bind "pcnet_cs"
>
> card "Level One 10/100 Fast Ethernet"
> version "Dual Speed", "10/100 PC Card"
> bind "pcnet_cs"
>
> card "Linksys EtherFast 10/100 Fast Ethernet"
> version "Linksys", "EtherFast 10/100 PC Card (PCMPC100)"
> bind "pcnet_cs"
>
> card "Logitec LPM-LN100TX Fast Ethernet"
> version "Logitec", "LPM-LN100TX"
> bind "pcnet_cs"
>
> card "Melco LPC2-TX Fast Ethernet"
> version "MELCO", "LPC2-TX"
> bind "pcnet_cs"
>
> card "Melco/SMC LPC-TX Fast Ethernet"
> version "MELCO/SMC", "LPC-TX"
> bind "smc91c92_cs"
>
> card "Microcom C.E. Travel Card 10/100 Fast Ethernet"
> version "Microcom C.E.", "Travel Card LAN 10/100"
> bind "pcnet_cs"
>
> card "NetGear FA410TXC Fast Ethernet"
> version "NETGEAR", "FA410TX"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Fast Ethernet"
> manfid 0x0149, 0x0230
> bind "pcnet_cs"
>
> card "NE2000 Compatible Fast Ethernet"
> version "PCMCIA", "10/100 Ethernet Card"
> bind "pcnet_cs"
>
> card "NE2000 Compatible Fast Ethernet"
> version "PCMCIA", "FAST ETHERNET CARD"
> bind "pcnet_cs"
>
> card "Ositech Seven of Diamonds Fast Ethernet"
> version "Ositech", "Trumpcard:Seven of Diamonds Ethernet"
> bind "smc91c92_cs"
>
> card "Planex FNW-3600T Fast Ethernet"
> version "Fast Ethernet", "Adapter"
> bind "pcnet_cs"
>
> card "Psion Gold Card NetGlobal 10/100 Fast Ethernet"
> manfid 0x016c, 0x0023
> bind "smc91c92_cs"
>
> card "Toshiba Advanced Network Fast Ethernet"
> version "Toshiba Information Systems", "*", "TPCENET"
> bind "xirc2ps_cs"
>
> card "Toshiba 10/100 Fast Ethernet"
> version "Toshiba", "10/100 Ethernet PC Card"
> bind "xirc2ps_cs"
>
> # These conflict with other cards!
> #card "WiseCom WC-PC400 Fast Ethernet"
> # manfid 0x0186, 0x0100
> # bind "smc91c92_cs"
> #card "WiseCom WC-PC400 Fast Ethernet"
> # manfid 0x8a01, 0xc1ab
> # bind "smc91c92_cs"
>
> card "Xircom CE3-10/100 Fast Ethernet"
> version "Xircom", "*", "CE3-10/100"
> bind "xirc2ps_cs"
>
> card "Xircom RealPort2 10/100 Fast Ethernet"
> version "Xircom", "*", "R2E-100BTX"
> bind "xirc2ps_cs"
>
> card "Xircom XE2000 10/100 Fast Ethernet"
> manfid 0x0105, 0x010a
> bind "xirc2ps_cs"
>
> #
> # Wireless network adapters
> #
> card "Aironet PC4500"
> manfid 0x015f, 0x0005
> bind "airo_cs"
>
> card "Aironet PC4800"
> manfid 0x015f, 0x0007
> bind "airo_cs"
>
> card "AT&T WaveLAN Adapter"
> version "AT&T", "WaveLAN/PCMCIA"
> bind "wavelan_cs"
>
> card "Cabletron RoamAbout 802.11 DS"
> version "Cabletron", "RoamAbout 802.11 DS"
> bind "wvlan_cs"
>
> card "Digital RoamAbout/DS"
> version "Digital", "RoamAbout/DS"
> bind "wavelan_cs"
>
> card "ELSA AirLancer MC-11"
> version "ELSA", "AirLancer MC-11"
> bind "wvlan_cs"
>
> card "Lucent Technologies WaveLAN Adapter"
> version "Lucent Technologies", "WaveLAN/PCMCIA"
> bind "wavelan_cs"
>
> card "D-Link DWL-650 11 Mbps Wireless Adapter"
> manfid 0x0156, 0x0002
> bind "wvlan_cs"
>
> card "Lucent Technologies WaveLAN/IEEE Adapter"
> version "Lucent Technologies", "WaveLAN/IEEE"
> bind "wavelan_cs"
>
> card "MELCO WLI-PCM-L11"
> version "MELCO", "WLI-PCM-L11"
> bind "wvlan_cs"
>
> card "NCR WaveLAN Adapter"
> version "NCR", "WaveLAN/PCMCIA"
> bind "wavelan_cs"
>
> card "NCR WaveLAN/IEEE Adapter"
> version "NCR", "WaveLAN/IEEE"
> bind "wvlan_cs"
>
> card "ELSA AirLancer MC-11"
> version "ELSA", "AirLancer MC-11"
> bind "wvlan_cs"
>
> card "RayLink PC Card WLAN Adapter"
> manfid 0x01a6, 0x0000
> bind "ray_cs"
>
> card "Xircom CreditCard Netwave"
> version "Xircom", "CreditCard Netwave"
> bind "netwave_cs"
>
> #
> # Modems and other serial devices
> #
> # NOTE: most modems do not need explicit entries here, because they
> # are correctly identified using the following generic entry.
> #
> card "Serial or Modem"
> function serial_port
> bind "serial_cs"
>
> card "3Com 3CCM156 56K Global Modem"
> manfid 0x0101, 0x0039
> bind "serial_cs"
>
> card "Angia Fax/Modem"
> version "Intelligent", "ANGIA FAX/MODEM"
> bind "serial_cs"
>
> card "Bullet V.34 28.8K Modem"
> version "OEM ", "C288MX "
> bind "serial_cs"
>
> card "Cirrus Logic 14.4K Fax Modem"
> version "CIRRUS LOGIC", "FAX MODEM"
> bind "serial_cs"
>
> card "Compaq 28.8K Modem"
> version "COMPAQ", "PCMCIA 28800 FAX/DATA MODEM"
> bind "serial_cs"
>
> card "Compaq 33.6K Modem"
> version "COMPAQ", "PCMCIA 33600 FAX/DATA MODEM"
> bind "serial_cs"
>
> card "Dr. Neuhaus 14.4K FURY Card"
> version "Dr. Neuhaus", "FURY CARD 14K4"
> bind "serial_cs"
>
> card "E.TECH Bullet 33.6K Modem"
> version "PCMCIA ", "C336MX "
> bind "serial_cs"
>
> card "Gateway 2000 TelePath Fax Modem"
> version "GATEWAY2000", "CC3144", "*", "PCMCIA MODEM"
> bind "serial_cs"
>
> card "Intel-compatible Modem"
> version "Intel", "MODEM 2400+"
> bind "serial_cs"
>
> card "Macronix Fax/Modem"
> version "MACRONIX", "FAX/MODEM"
> bind "serial_cs"
>
> card "Megahertz PCMCIA Modem"
> version "MEGAHERTZ", "*", "*", "PCMCIA MODEM"
> bind "serial_cs"
>
> card "Megahertz V.34 Modem"
> version "MEGAHERTZ", "*", "V.34 PCMCIA MODEM"
> bind "serial_cs"
>
> card "MultiTech MultiModem"
> version "Multi-Tech", "MT1432LT"
> bind "serial_cs"
>
> card "MultiTech V.34 Modem"
> version "Multi-Tech", "MT2834LT"
> bind "serial_cs"
>
> card "MultiTech MT5634ZLX"
> version "MultiTech", "PCMCIA 56K DataFax"
> cis "cis/MT5634ZLX.dat"
> bind "serial_cs"
>
> card "Toshiba T144PF Modem"
> version "TOSHIBA", "T144PF", "*", "PCMCIA MODEM"
> bind "serial_cs"
>
> card "Advantech COMpad-32/85"
> version "ADVANTECH", "COMpad-32/85", "1.0"
> cis "cis/COMpad2.dat"
> bind "serial_cs"
>
> card "Advantech COMpad-32/85B-4"
> version "ADVANTECH", "COMpad-32/85B-4"
> cis "cis/COMpad4.dat"
> bind "serial_cs"
>
> card "Advantech COMpad-32/85"
> version "ADV", "*", "TECH", "COMpad-32/85"
> bind "serial_cs"
>
> card "Argosy Dual Serial I/O"
> version "*", "RS-COM 2P"
> cis "cis/RS-COM-2P.dat"
> bind "serial_cs"
>
> card "Brain Boxes 2-Port RS-232"
> manfid 0x0160, 0x0002
> bind "serial_cs" to 0, "serial_cs" to 1
>
> card "Computerboards PCM-COM422"
> version "Computerboards, Inc.", "PCM-COM422"
> bind "serial_cs"
>
> card "Fujitsu FMV-JMD711"
> version "FUJITSU", "FC14F ", "MBH10213"
> bind "serial_cs"
>
> card "IOTech Dual RS-232"
> version "IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card"
> bind "serial_cs"
>
> card "National Instruments PCMCIA-232"
> manfid 0x10b, 0x0d50
> bind "serial_cs"
>
> card "National Instruments PCMCIA-232/2"
> manfid 0x10b, 0x0d51
> bind "serial_cs"
>
> card "National Instruments PCMCIA-485"
> manfid 0x10b, 0x0d52
> bind "serial_cs"
>
> card "National Instruments PCMCIA-485/2"
> manfid 0x10b, 0x0d53
> bind "serial_cs"
>
> card "National Instruments PCMCIA-232/4"
> manfid 0x10b, 0xd180
> bind "serial_cs"
>
> card "Omega Engineering QSP-100"
> manfid 0x0137, 0x0025
> bind "serial_cs"
>
> card "Quatech Dual RS-232"
> version "Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card"
> bind "serial_cs"
>
> card "Quatech Quad RS-232"
> manfid 0x0137, 0x001b
> bind "serial_cs"
>
> card "Silicom 2S100 Dual Serial"
> manfid 0x0089, 0x0301
> bind "serial_cs"
>
> card "Socket Communications Dual RS-232"
> manfid 0x0104, 0x0006
> bind "serial_cs"
>
> card "Socket Communications Dual I/O Card"
> manfid 0x0104, 0x0070
> bind "serial_cs" to 0, "serial_cs" to 1
>
> #
> # Memory cards
> #
> card "Anonymous Memory"
> anonymous
> bind "memory_cs"
>
> card "Memory Card"
> function memory_card
> bind "memory_cs"
>
> card "IBM 2MB SRAM"
> version "IBM", "2MB SRAM"
> bind "memory_cs"
>
> card "IBM 4MB Series 1 Flash"
> version "IBM", "4MB FLASH"
> bind "memory_cs", "ftl_cs"
>
> card "IBM 8MB Series 2 Flash"
> version "IBM", "8MB FLASH"
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 2 2MB Flash"
> version "intel", "SERIES2-02 "
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 2 4MB Flash"
> version "intel", "SERIES2-04 "
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 2 20MB Flash"
> version "intel", "SERIES2-20 "
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 2+ 8MB Flash"
> version "Intel", "S2E8 SW"
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 2+ 20MB Flash"
> version "Intel", "S2E20SW"
> bind "memory_cs", "ftl_cs"
>
> card "Intel Series 100 Flash"
> version "intel", "VALUE SERIES 100 "
> bind "memory_cs", "ftl_cs"
>
> card "IO DATA 2MB SRAM"
> version "IO DATA", "PCS-2M", "2MB SRAM"
> bind "memory_cs"
>
> card "Maxtor MobileMax Flash"
> version "Maxtor", "MAXFL MobileMax Flash Memory Card"
> bind "memory_cs", "ftl_cs"
>
> card "Seiko/Epson WWB101EN20"
> version "SEIKO EPSON", "WWB101EN20"
> bind "memory_cs"
>
> card "Seiko/Epson WWB513EN20"
> version "SEIKO EPSON", "WWB513EN20"
> bind "memory_cs"
>
> card "Franklink/Rolodex REX-3000"
> version "Starfish, Inc.", "REX-3000"
> bind "memory_cs"
>
> card "Franklink/Rolodex REX-4100"
> version "Starfish, Inc.", "REX-4100"
> bind "memory_cs"
>
> #card "RATOC SmartMedia Adapter"
> # version "RATOC Systems,Inc.", "SmartMedia ADAPTER PC Card"
> # bind "memory_cs", "ftl_cs"
>
> #
> # Memory Technology Drivers
> #
> region "Generic or SRAM"
> default
> mtd "sram_mtd"
>
> region "Intel Series 2 Flash"
> jedec 0x89 0xa2
> mtd "iflash2_mtd"
>
> region "Intel Series 100 Flash"
> jedec 0x89 0xaa
> mtd "iflash2_mtd"
>
> region "Intel Series 2+ Flash"
> jedec 0x89 0xa0
> mtd "iflash2+_mtd"
>
> #
> # Token Ring adapters
> #
> card "3Com TokenLink Velocity Adapter"
> version "3Com", "TokenLink Velocity PC Card"
> bind "ibmtr_cs"
>
> card "IBM Token Ring Adapter"
> version "IBM", "TOKEN RING"
> bind "ibmtr_cs"
>
> #
> # SCSI host adapters
> #
> card "Adaptec APA-1460 SlimSCSI"
> version "Adaptec, Inc.", "APA-1460 SCSI Host Adapter"
> bind "aha152x_cs"
>
> card "Eiger Labs SCSI"
> version "EIger Labs", "PCMCIA-to-SCSI Adapter"
> bind "qlogic_cs"
>
> card "Epson SC200 SCSI"
> version "EPSON", "SCSI-2 PC Card SC200"
> bind "qlogic_cs"
>
> card "IBM SCSI"
> version "IBM Corp.", "SCSI PCMCIA Card"
> bind "fdomain_cs"
>
> card "IBM SCSI"
> version "SCSI PCMCIA Adapter Card"
> bind "fdomain_cs"
>
> #card "MACNICA mPS100 SCSI"
> # version "MACNICA", "MIRACLE SCSI", "mPS100"
> # bind "qlogic_cs"
>
> card "MACNICA mPS110 SCSI"
> version "MACNICA", "MIRACLE SCSI-II mPS110"
> bind "qlogic_cs"
>
> card "Midori CN-SC43 SCSI"
> version "MIDORI ELECTRONICS ", "CN-SC43"
> bind "qlogic_cs"
>
> card "NEC PC-9801N-J03R SCSI"
> version "NEC", "PC-9801N-J03R"
> bind "qlogic_cs"
>
> card "New Media Bus Toaster SCSI"
> version "New Media", "SCSI", "Bus Toaster"
> bind "aha152x_cs"
>
> card "New Media Toast & Jam Sound/SCSI"
> version "New Media Corporation", "Multimedia Sound/SCSI"
> bind "aha152x_cs"
>
> card "Noteworthy Bus Toaster SCSI"
> version "NOTEWORTHY", "SCSI", "Bus Toaster"
> bind "aha152x_cs"
>
> card "New Media BASICS SCSI"
> version "BASICS by New Media Corporation", "SCSI Sym53C500"
> bind "sym53c500_cs"
>
> card "New Media Bus Toaster SCSI"
> version "New Media Corporation", "SCSI Bus Toaster Sym53C500"
> bind "sym53c500_cs"
>
> card "Panasonic KXLC003"
> version "KME ", "KXLC003"
> bind "qlogic_cs"
>
> card "Panasonic KXLC004"
> version "KME ", "KXLC004"
> bind "qlogic_cs"
>
> card "Panasonic KXLC101"
> version "KME", "KXLC101"
> bind "qlogic_cs"
>
> card "Qlogic FastSCSI"
> version "QLOGIC CORPORATION", "pc05"
> bind "qlogic_cs"
>
> card "Qlogic FastSCSI"
> version "QLOGIC CORPORATION", "pc05 rev 1.10"
> bind "qlogic_cs"
>
> card "Raven CD-Note SCSI"
> version "KME", "KXLC002", "00"
> bind "qlogic_cs"
>
> card "RATOC REX-9530 SCSI-2"
> version "RATOC System Inc.", "SCSI2 CARD 37"
> bind "qlogic_cs"
>
> card "SIMA TECH SCSI9000"
> version "*", "SCSI9000"
> bind "sym53c500_cs"
>
> card "Simple Technology SCSI"
> version " SIMPLE TECHNOLOGY Corporation",
> "SCSI PCMCIA Credit Card Controller"
> bind "fdomain_cs"
>
> card "Toshiba SCSC200A SCSI"
> version "TOSHIBA", "SCSC200A PC CARD SCSI"
> bind "qlogic_cs"
>
> card "Toshiba SCSC200B SCSI"
> version "TOSHIBA", "SCSC200B PC CARD SCSI-10"
> bind "qlogic_cs"
>
> #
> # IEEE1394/FireWire cards
> #
> card "Newer Technology FireWire 2 Go"
> pci 0x104c, 0x8000
> bind "pcilynx_cb"
>
> #
> # Multifunction cards
> #
> card "3Com 3c562/3c563 Ethernet/Modem"
> manfid 0x0101, 0x0562
> bind "3c589_cs" to 0, "serial_cs" to 1
>
> card "3Com/Megahertz 3CXEM556 Ethernet/Modem"
> manfid 0x0101, 0x0035
> cis "cis/3CXEM556.dat"
> bind "3c589_cs" to 0, "serial_cs" to 1
>
> card "3Com/Megahertz 3CXEM556 B-INT Ethernet/Modem"
> manfid 0x0101, 0x003d
> cis "cis/3CXEM556.dat"
> bind "3c589_cs" to 0, "serial_cs" to 1
>
> card "3Com/Megahertz 3CCFEM556 Ethernet/Modem"
> manfid 0x0101, 0x0556
> cis "cis/3CCFEM556.dat"
> bind "3c574_cs" to 0, "serial_cs" to 1
>
> card "Accton EN2218 LAN/Modem"
> version "PCMCIA", "EN2218-LAN/MODEM"
> cis "cis/PCMLM28.dat"
> bind "pcnet_cs", "serial_cs"
>
> card "Accton UE2218 LAN/Modem"
> version "PCMCIA", "UE2218-LAN/MODEM"
> cis "cis/PCMLM28.dat"
> bind "pcnet_cs", "serial_cs"
>
> card "AnyCom Fast Ethernet/Modem"
> version "AnyCom", "Fast Ethernet + 56K COMBO"
> bind "pcnet_cs", "serial_cs"
>
> card "Apex MultiCard Ethernet/Modem"
> version "APEX DATA", "MULTICARD", "ETHERNET-MODEM"
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "Billionton LM5LT-10B Ethernet/Modem"
> manfid 0x021b, 0x0101
> bind "pcnet_cs", "serial_cs"
>
> card "Compaq Microcom CPQ550 Ethernet/Modem"
> manfid 0x0138, 0x110a
> bind "xirc2ps_cs", "serial_cs"
>
> card "Dayna Communicard Ethernet/Modem"
> version "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION"
> cis "cis/DP83903.dat"
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "D-Link DME336T Ethernet/Modem"
> version "D-Link", "DME336T"
> bind "pcnet_cs", "serial_cs"
>
> card "D-Link DMF560TX Ethernet/Modem"
> manfid 0x0143, 0xc0ab
> bind "pcnet_cs", "serial_cs"
>
> card "Gateway Telepath Ethernet/Modem"
> version "Gateway 2000", "XJEM3336"
> bind "smc91c92_cs", "serial_cs"
>
> card "Grey Cell GCS3400 Ethernet/Modem"
> version "Grey Cell", "GCS3000"
> bind "pcnet_cs", "serial_cs"
>
> card "IBM Home and Away Ethernet/Modem"
> version "IBM", "Home and Away Credit Card Adapter"
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "IBM Home and Away 28.8 Ethernet/Modem"
> version "IBM", "Home and Away 28.8 PC Card "
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "IBM w95 Home and Away Ethernet/Modem"
> version "IBM", "w95 Home and Away Credit Card "
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "Intel EtherExpress PRO/100 LAN/Modem"
> manfid 0x0089, 0x110a
> bind "xirc2ps_cs", "serial_cs"
>
> card "No-Name Ethernet/Modem"
> version "*", "FAX/Modem/Ethernet Combo Card "
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "Linksys LANmodem 28.8"
> version "LINKSYS", "PCMLM28"
> cis "cis/PCMLM28.dat"
> bind "pcnet_cs", "serial_cs"
>
> card "Linksys LANmodem 33.6"
> version "LINKSYS", "PCMLM336"
> bind "pcnet_cs", "serial_cs"
>
> card "Linksys EtherFast LANmodem 56K"
> version "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)"
> bind "pcnet_cs", "serial_cs"
>
> card "Megahertz CC/XJEM1144 Ethernet/Modem"
> version "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM"
> bind "smc91c92_cs", "serial_cs"
>
> card "Megahertz CC/XJEM1144 Ethernet/Modem"
> version "MEGAHERTZ", "XJEM1144/CCEM1144"
> bind "smc91c92_cs", "serial_cs"
>
> card "Megahertz EM1144T Ethernet/Modem"
> version "MEGAHERTZ", "EM1144T", "PCMCIA MODEM"
> bind "smc91c92_cs", "serial_cs"
>
> card "Megahertz CC/XJEM3288 Ethernet/Modem"
> version "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM"
> bind "smc91c92_cs", "serial_cs"
>
> card "Megahertz CC/XJEM3336 Ethernet/Modem"
> version "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM"
> bind "smc91c92_cs", "serial_cs"
>
> card "Motorola Marquis Ethernet/Modem"
> version "Motorola MARQUIS"
> bind "3c589_cs" to 0, "serial_cs" to 1
>
> card "Motorola Mariner Ethernet/Modem"
> manfid 0x0109, 0x0501
> bind "smc91c92_cs", "serial_cs"
>
> card "New Media LANSurfer 10+56 Ethernet/Modem"
> manfid 0x08a1, 0xc0ab
> bind "pcnet_cs", "serial_cs"
>
> card "NSC DP83903-based Ethernet/Modem"
> version "*", "*", "*", "NSC MF LAN/Modem"
> cis "cis/DP83903.dat"
> bind "pcnet_cs" to 0, "serial_cs" to 1
>
> card "Ositech Jack of Diamonds Ethernet/Modem"
> version "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet"
> bind "smc91c92_cs", "serial_cs"
>
> card "Ositech Jack of Hearts Ethernet/Modem"
> version "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet"
> bind "smc91c92_cs", "serial_cs"
>
> card "Ositech Jack of Hearts Ethernet/Modem"
> manfid 0x0140, 0x000a
> bind "smc91c92_cs", "serial_cs"
>
> card "Psion Gold Card V34 Ethernet"
> version "Psion Dacom", "Gold Card V34 Ethernet"
> cis "cis/PCMLM28.dat"
> bind "pcnet_cs", "serial_cs"
>
> card "Psion Gold Card V34 Ethernet"
> version "Psion Dacom", "Gold Card V34 Ethernet GSM"
> cis "cis/PCMLM28.dat"
> bind "pcnet_cs", "serial_cs"
>
> card "Psion Gold Card Netglobal 56K+10Mb Ethernet"
> manfid 0x016c, 0x0020
> bind "smc91c92_cs" to 0, "serial_cs" to 1
>
> card "Rover ComboCard Ethernet/Modem"
> version "PCMCIAs", "ComboCard"
> bind "pcnet_cs", "serial_cs"
>
> card "Socket ES-1000 Ethernet/RS-232"
> manfid 0x0104, 0x000a
> bind "pcnet_cs", "serial_cs"
>
> card "TDK Global Networker Ethernet/Modem"
> version "TDK", "GlobalNetworker 3410/3412"
> bind "serial_cs"
>
> card "TDK 3000/3400/5670 Fast Ethernet/Modem"
> manfid 0x0143, 0x3341
> bind "pcnet_cs", "serial_cs"
>
> card "TDK DFL5610WS Ethernet/Modem"
> manfid 0x0105, 0xea15
> bind "pcnet_cs", "serial_cs"
>
> card "Telecom Device SuperSocket LM336 Ethernet/Modem"
> version "PCMCIAs", "LanModem"
> bind "pcnet_cs", "serial_cs"
>
> card "Xircom CE II Ethernet/Modem"
> version "Xircom", "CreditCard Ethernet+Modem II"
> bind "xirc2ps_cs", "serial_cs"
>
> card "Xircom CEM28 Ethernet/Modem"
> version "Xircom", "*", "CEM28"
> bind "xirc2ps_cs", "serial_cs"
>
> card "Xircom CEM33 Ethernet/Modem"
> version "Xircom", "*", "CEM33"
> bind "xirc2ps_cs", "serial_cs"
>
> card "Xircom CEM56 Ethernet/Modem"
> version "Xircom", "*", "CEM56"
> bind "xirc2ps_cs", "serial_cs"
>
> card "Xircom RealPort REM10BT Ethernet/Modem"
> version "Xircom", "*", "REM10"
> bind "xirc2ps_cs", "serial_cs"
>
> card "Xircom XEM5600 Ethernet/Modem"
> version "Xircom", "*", "XEM5600"
> bind "xirc2ps_cs", "serial_cs"
>
> #
> # ATA/IDE fixed disk devices
> #
> card "ATA/IDE Fixed Disk"
> function fixed_disk
> bind "ide_cs"
>
> card "ACE DoubleFlash 20MB"
> version "IBM", "IBM17JSSFP20"
> bind "ide_cs"
>
> card "Argosy EIDE CD-ROM"
> version "ARGOSY", "CD-ROM"
> bind "ide_cs"
>
> card "Caravelle CD-36N/CD-36E CD-ROM"
> version "Caravelle", "PSC-IDE ", "PSC000"
> bind "ide_cs"
>
> card "CNF CARDport CD-ROM"
> version "CNF CD-M", "CD-ROM"
> bind "ide_cs"
>
> card "Creative Technology CD-ROM"
> version "Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card"
> bind "ide_cs"
>
> card "Digital Mobile Media CD-ROM"
> version "Digital Equipment Corporation.", "Digital Mobile Media CD-ROM"
> bind "ide_cs"
>
> card "EXP CD940 CD-ROM"
> version "EXP ", "CD-ROM"
> bind "ide_cs"
>
> card "EXP Traveler 620 CD-ROM"
> version "EXP", "CD+GAME", "C1"
> bind "ide_cs"
>
> card "Freecom IQ-drive"
> version "FREECOM", "PCCARD-IDE"
> bind "ide_cs"
>
> card "Generic ATAPI CD-ROM"
> version "PCMCIA", "CD-ROM"
> bind "ide_cs"
>
> card "IBM Max Portable CD-ROM"
> manfid 0x00a4, 0x002d
> bind "ide_cs"
>
> card "IBM Portable Drive Bay"
> version "PCMCIA", "IDE CARD", "F1"
> bind "ide_cs"
>
> card "IO DATA CDP-TX/PCIDE"
> version "IO DATA", "PCIDE"
> bind "ide_cs"
>
> card "IO DATA PCIDE II"
> version "IO DATA", "PCIDEII"
> bind "ide_cs"
>
> card "IO DATA CBIDE"
> version "WIT", "IDE16"
> bind "ide_cs"
>
> card "IO DATA CBIDE2"
> version "IO DATA", "CBIDE2 "
> bind "ide_cs"
>
> card "MCD601p CD-ROM"
> version "CDROM", "IDE", "MCD-601p"
> bind "ide_cs"
>
> card "Ninja ATA"
> version " ", "NinjaATA-"
> bind "ide_cs"
>
> card "Simple Tech Compact Flash"
> version "STI Flash"
> bind "ide_cs"
>
> card "Toshiba CD-ROM"
> version "LOOKMEET", "CBIDE2 "
> bind "ide_cs"
>
> #
> # Non-ATA/IDE CD-ROM's
> #
> card "Innovative Communications CyberRom CD"
> version "Innovative Communications", "CyberRom CD"
> bind "oti12_cs"
>
> #
> # Miscellaneous card definitions
> #
> #card "Canon FDCard"
> # version "Canon Electronics INC.", "FDCard Ver. 1.00"
> #
> #card "New Media .WAVjammer"
> #version "New Media Corporation", ".WAVjammer"
>
> card "IBM Smart Capture Card"
> version "IBM Corp.", "Video Capture"
> bind "iscc_cs"
>
> card "Parallel Port Card"
> function parallel_port
> bind "parport_cs"
>
> card "Quatech SPP-100 Parallel Port Card"
> manfid 0x0137, 0x0003
> bind "parport_cs"
>
> card "TELES S0/PC ISDN"
> version "TELES", "S0/PC"
> bind "teles_cs"
>
> #
> # CardBus cards
> #
> card "3Com 3c575-TX Fast EtherLink XL"
> manfid 0x0101, 0x5057
> bind "3c575_cb"
>
> card "3Com 3CCFE575B/3CXFE575B Fast EtherLink XL"
> manfid 0x0101, 0x5157
> bind "3c575_cb"
>
> card "3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL"
> manfid 0x0101, 0x5257
> bind "3c575_cb"
>
> card "3Com 3CCFEM656B w/Winmodem"
> manfid 0x0102, 0x6560
> bind "3c575_cb"
>
> card "3Com 3CCFEM656B w/Winmodem"
> manfid 0x0102, 0x6562
> bind "3c575_cb"
>
> card "3Com 3CXFEM656C w/Winmodem"
> manfid 0x0102, 0x6564
> bind "3c575_cb"
>
> card "Accton EN2220 Fast Ethernet"
> version "Accton", "EN2220 CardBus Fast Ethernet Card"
> bind "tulip_cb"
>
> card "Adaptec APA-1480 SCSI Host Adapter"
> manfid 0x012f, 0xcb01
> bind "apa1480_cb"
>
> #Conflicts with corega PCC-T!
> #card "Allied Telesyn AT-2800 10/100 Fast Ethernet"
> # manfid 0xc00f, 0x0000
> # bind "tulip_cb"
>
> card "Ambicom AMB8100 Fast Ethernet"
> manfid 0x9513, 0x0081
> bind "tulip_cb"
>
> card "Asante FriendlyNET 10/100 CardBus"
> version "Asante", "FriendlyNET 10/100 CardBus"
> bind "tulip_cb"
>
> card "Billionton LND-100B Fast Ethernet"
> version "Billionton", "LND-100B"
> bind "tulip_cb"
>
> card "D-Link DFE-660 Fast Ethernet"
> manfid 0x50c7, 0xcafe
> bind "tulip_cb"
>
> card "Farallon EtherTX 10/100 Fast Ethernet"
> version "Farallon", "10/100", "Ethernet"
> bind "tulip_cb"
>
> card "Fujitsu FMV-J184 Fast Ethernet"
> version "FUJITSU", "LAN Card(100BASE-TX)(FMV-J184)"
> bind "tulip_cb"
>
> card "Fujitsu FMV-J185 Fast Ethernet"
> version "FUJITSU", "LAN Card(100BASE-TX)(FMV-J185)"
> bind "eepro100_cb"
>
> card "Genius MF3000 Fast Ethernet"
> version "CardBus", "10/100Mbps LanCard"
> bind "tulip_cb"
>
> card "IBM 10/100 EtherJet CardBus"
> manfid 0x00a4, 0x0113
> bind "tulip_cb"
>
> card "IBM 10/100 EtherJet 56K CardBus"
> manfid 0x00a4, 0x0103
> bind "tulip_cb", "serial_cb"
>
> card "Intel EtherExpress PRO/100 CardBus"
> manfid 0x0089, 0x0102
> bind "tulip_cb"
>
> card "Intel EtherExpress PRO/100 CardBus Mobile Adapter32"
> manfid 0x0089, 0x0113
> bind "tulip_cb"
>
> card "Intel EtherExpress PRO/100 CardBus"
> manfid 0x0089, 0x0113
> bind "tulip_cb"
>
> card "Intel EtherExpress PRO/100 CardBus II"
> manfid 0x0089, 0x0103
> bind "eepro100_cb"
>
> card "Intel EtherExpress PRO/100 LAN+Modem 56K CardBus II"
> manfid 0x0089, 0x1103
> bind "eepro100_cb" to 0, "serial_cb" to 1
>
> card "Kingston KNE-CB4TX Fast Ethernet"
> manfid 0x0186, 0x0101
> bind "tulip_cb"
>
> card "Linksys EtherFast 10/100"
> manfid 0x0149, 0x0231
> bind "tulip_cb"
>
> card "Linksys EtherFast 10/100"
> manfid 0x0149, 0xc2ab
> bind "tulip_cb"
>
> card "NDC Communications Sohoware NCB100 Fast Ethernet"
> version "NDC Communications, Inc.", "NCB100"
> bind "tulip_cb"
>
> card "NetGear FA510C Fast Ethernet"
> manfid 0x9513, 0x0081
> bind "tulip_cb"
>
> card "PLANET ENW-3502-FC"
> version "PLANET", "ENW-3502-FC"
> bind "tulip_cb"
>
> card "PrimeXPress 10/100 Fast Ethernet"
> manfid 0x021b, 0x0510
> bind "tulip_cb"
>
> card "Silicom FEM56 Fast Ethernet"
> manfid 0x01da, 0x0090
> bind "tulip_cb"
>
> card "SMC EZ 10/100 Fast Ethernet"
> manfid 0x01bf, 0x2220
> bind "tulip_cb"
>
> card "SMC EZ 10/100 Fast Ethernet"
> manfid 0x01bf, 0x2225
> bind "tulip_cb"
>
> #card "SVEC 10/100 Fast Ethernet"
> # manfid 0x8a01, 0x0100
> # bind "tulip_cb"
>
> card "TDK NetworkFlyer 10/100 Fast Ethernet"
> manfid 0x0105, 0x0500
> bind "tulip_cb"
>
> card "Tulip-based CardBus Fast Ethernet"
> version "CardBus", "10/100Mbps LAN Card"
> bind "tulip_cb"
>
> card "UMAX Technologies UMAX250 Fast Ethernet"
> manfid 0x9513, 0x0081
> bind "tulip_cb"
>
> card "Ositech Seven of Spades Fast Ethernet"
> manfid 0x0140, 0x0011
> bind "epic_cb"
>
> card "Ositech Jack of Spades Fast Ethernet/Modem"
> manfid 0x0140, 0x000f
> bind "epic_cb" to 0, "serial_cb" to 1
>
> card "Ositech Jack of Spades Fast Ethernet/Modem"
> manfid 0x0140, 0x0012
> bind "epic_cb" to 0, "serial_cb" to 1
>
> card "Psion Gold Card Netglobal 56K+10/100Mb CardBus"
> manfid 0x016c, 0x0021
> bind "epic_cb" to 0, "serial_cb" to 1
>
> card "Xircom CBEII-10/100 CardBus 10/100 Ethernet"
> version "Xircom", "*", "CBEII-10/100"
> bind "tulip_cb"
>
> card "Xircom R2BE-100BTX CardBus 10/100 Ethernet"
> version "Xircom", "*", "R2BE-100BTX"
> bind "tulip_cb"
>
> card "Xircom CBEM56G-100 CardBus 10/100 Ethernet + 56K Modem"
> version "Xircom", "*", "CBEM56G"
> bind "tulip_cb" to 0, "serial_cb" to 1
>
> card "Xircom RBM56G Modem"
> manfid 0x0105, 0x1000
> bind "serial_cb"
>
> # Include configuration files for add-on drivers
>
> source ./*.conf
>
> # Include local configuration settings
>
> source ./config.opts
> no product info available
> Socket 1:
> product info: "Xircom", "CreditCard 10/100", "CE3-10/100", "1.00"
> manfid: 0x0105, 0x010a
> function: 6 (network)
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>
Reply to: