Re: Back to Windows??
On Sat, 17 Feb 2001, Jan van Veldhuizen wrote:
> This afternoon I bought a box with Suse Linux 7 and a set of books.
> It took me 2 hours, but now X Windows is running properly. But my printer is
> not supported, and I have not yet configured my ISDN modem.
That's often the problem with first having the hardware and then deciding
to install linux on it.
For you printer have a look at http://www.linuxprointing.org (if I'm
correct), it has a complate listing of what's supported what's
half-supported and what's not.
FOr your isdn-stuff, see the Documentation/sidn/ dir in any kernel-sources
(there probably is a isdn-howto or more info on
http://metlab.unc.edu/LDP/)
> I'm feeling 20 years in the past, when configuring all peripheral hardware
> was a specialist's job...
> Or have I become dull by Microsoft's Plug'n Play.....
I'm sorry I ahve to say yes to the latter point.
I have to agree with both former repliers to this message, linux ain't
easy but at least you have the freedom of choosing what and what not to
do.
And if it helps any, you've not choosen greatly by trying your first
install on a laptop. Laptops are a big pain in the ass to install corectly
becaue of all the specialized hardware these things hold.
> -----Oorspronkelijk bericht-----
> Van: A. Demarteau (linux rules!) [mailto:linux@disnet.demon.nl]
> Verzonden: zaterdag 17 februari 2001 10:59
> Aan: Jan van Veldhuizen
> CC: 'Debian-Laptop (E-mail)
> Onderwerp: RE: hisax parameters needed!
>
>
> On Sat, 17 Feb 2001, Jan van Veldhuizen wrote:
>
> > I already checked this textfile, but my modem is not there..... :-((
> Well, as hard as it may seem, if it's not in there there's probably no
> support for it.
> Unless you're running a 2.2x kernel and 2.4.x has the support you need or
> it's 100% compatible to another brand of isdn-modem.
> What you can do is the following:
> compile isdn-support as modules, compile hisax as module and include all
> possible drivers for it, load the module wiht differnet cardtypes, check
> dmesg-commandoutput if initialization was correct (if needed).
> If it's a pcmcia-card, you have to check pcmcia-cs docs for more details
> cause for those cards (at least in 2.2.x kernels) you need support
> there. 2.4.x has that support in the kernel itself.
> Also be sure it's a hisax-compatible driver at the first place and se if
> there maybe another dirver in the kernel which will do the trick.
> Ultimately, contact the hardware-vendor to see if they know if it's
> supported.
> success!
>
> > -----Oorspronkelijk bericht-----
> > Van: A. Demarteau (linux rules!) [mailto:linux@disnet.demon.nl]
> > Verzonden: vrijdag 16 februari 2001 20:46
> > Aan: Jan van Veldhuizen
> > CC: 'Debian-Laptop (E-mail)
> > Onderwerp: Re: hisax parameters needed!
> >
> >
> > have a look in /usr/src/linux/Documentation/README.hisax (provided you
> > have the kernel-sources somewhere ofcorurse).
> > All supported cards are right in here with there specific paramters (if
> > any are needed)
> > Be wanred though, form my experience isdn is a big pain in the ass to
> > setup and maintain, be wanred for stainge things like connection getting
> > asseblished and dropped again with no immediately apperent reasons.
> > Then again, once it works, it does fine.
> >
> > On Thu, 15 Feb 2001, Jan van Veldhuizen wrote:
> >
> > > Yes! My analog modem works! I succesfully configured the pppconfig.
> > > I could not configure the ISDN-part of the card.
> > > Does anyone know the hisax-parameters of this card?
> > >
> > >
> > > -----Oorspronkelijk bericht-----
> > > Van: Drew Parsons [mailto:dparsons@emerall.com]
> > > Verzonden: donderdag 15 februari 2001 14:46
> > > Aan: 'Debian-Laptop (E-mail)
> > > Onderwerp: Re: pcmcia card activation
> > >
> > >
> > > On Thu, Feb 15, 2001 at 02:09:37PM +0100, Jan van Veldhuizen wrote:
> > > > I am really a stupid newbie!!
> > > >
> > > > Now I've read that my xircom card is supported by pcmcia-cs, whatever
> > that
> > > > may be.
> > > > But my installation notes from Debian do not tell me exactly what to
> do.
> > > > Perhaps it does, but I can't find it.
> > > >
> > > > Which file must I edit, or what is the name of the configuration tool
> > that
> > > I
> > > > can use to tell Linux which card I have, what the IP-number should be,
> > > > etc....
> > > >
> > >
> > >
> > > If you have both pcmcia-cs and pcmcia-modules installed, with the latter
> > > compiled for the kernel you're using, your computer should locate your
> > card
> > > as soon as it's inserted, with no extra configuration required. You
> > should
> > > hear a high beep as soon as it goes in, and you can check in
> > /var/log/syslog
> > > that your computer identified the card properly (the xirc2ps driver will
> > > probably be used for it). You'll see something like:
> > >
> > > Feb 15 23:08:17 localhost cardmgr[163]: socket 0: Xircom CEM56
> > > Ethernet/Modem
> > > Feb 15 23:08:17 localhost cardmgr[163]: executing: 'modprobe xirc2ps_cs'
>
> > > Feb 15 23:08:17 localhost anacron[174]: Anacron 2.3 started on
> 2001-02-15
> > > Feb 15 23:08:17 localhost kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55
> > > (dd9jn+k
> > > Feb 15 23:08:17 localhost cardmgr[163]: executing: 'modprobe serial_cs'
> > >
> > > Then, to use the card, you put the settings into
> /etc/pcmcia/network.opts.
> > > The sample settings already there should be simple enough to follow,
> > > hopefully. You'll want to pop the card out and reinsert, to make any
> new
> > > network settings operative.
> > >
> > > Drew
> > >
> > > --
> > > PGP public key available at http://dparsons.webjump.com/drewskey.txt
> > > Fingerprint: A110 EAE1 D7D2 8076 5FE0 EC0A B6CE 7041 6412 4E4A
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> > > with a subject of "unsubscribe". Trouble? Contact
> > > listmaster@lists.debian.org
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> > > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> > >
> > >
> >
> > -----------
> > Andor Demarteau
> > linux@disnet.demon.nl
> > -----------
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> >
> >
>
> -----------
> Andor Demarteau
> linux@disnet.demon.nl
> -----------
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
-----------
Andor Demarteau
linux@disnet.demon.nl
-----------
Reply to: