Re: Xircom Ethernet/Modem problem
I have the same card, upgrade your kernel to >= 2.2.13.
It fixed my problem.
On Mon, 8 Nov 1999, Mesman, Ben wrote:
> I have a Dell Lattitude CP with a Xircom 33k6 Eth/modem combo. I installed
> slink with no problems. The card is recognised and configured properly and
> the ethernet device works.
> Problem is the modem. I can see no errors in the syslog file (attached), but
> sending ATZ to the modem has no effect.
> I read some HOWTO's and README files, but have not found the problem or the
> solution.
>
> Does this ring a bell to you, or have you got any suggestions where to look?
> please tell me!
>
> Greating,
> Ben Mesman.
>
> --- Part of syslog ---
> Nov 5 09:15:07 nl1019 cardmgr[103]: starting, version is 3.0.5
> Nov 5 09:15:07 nl1019 cardmgr[103]: watching 2 sockets
> Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x1000-0x17ff: excluding
> nothing: probe failed.
> Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x0100-0x04ff: excluding
> 0x210-0x217 0x220-0x22f 0x290-0x297 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
> Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Nov 5 09:15:07 nl1019 kerneld: started, pid=110, qid=0
> Nov 5 09:15:07 nl1019 cardmgr[103]: initializing socket 0
> Nov 5 09:15:07 nl1019 kernel: cs: memory probe 0xa0000000-0xa0ffffff:
> clean.
> Nov 5 09:15:07 nl1019 cardmgr[103]: socket 0: Xircom CEM33 Ethernet/Modem
> Nov 5 09:15:07 nl1019 cardmgr[103]: executing: 'insmod
> /lib/modules/2.0.36/pcmcia/xirc2ps_cs.o'
> Nov 5 09:15:07 nl1019 kernel: xirc2ps_cs.c 1.29 1998/04/27 19:20:19
> (dd9jn+kvh)
> Nov 5 09:15:07 nl1019 cardmgr[103]: executing: 'insmod
> /lib/modules/2.0.36/pcmcia/serial_cs.o'
> Nov 5 09:15:07 nl1019 kernel: eth0: Xircom: port 0x2d0, irq 3, hwaddr
> 00:80:C7:74:30:DC
> Nov 5 09:15:07 nl1019 kernel: tty03 at 0x02e8 (irq = 3) is a 16450
> Nov 5 09:15:07 nl1019 cardmgr[103]: executing: './network start eth0'
> Nov 5 09:15:09 nl1019 kernel: eth0: switching to 10BaseT port
> Nov 5 09:15:09 nl1019 kernel: eth0: media 10Base2, silicon revision 1
> Nov 5 09:15:10 nl1019 kernel: eth0: media 10Base2, silicon revision 1
> Nov 5 09:15:10 nl1019 cardmgr[103]: executing: './serial start ttyS3'
> Nov 5 09:20:50 nl1019 kernel: registered device ppp0
> Nov 5 09:20:50 nl1019 pppd[192]: pppd 2.3.5 started by root, uid 0
> Nov 5 09:20:51 nl1019 chat[193]: abort on (BUSY)
> Nov 5 09:20:51 nl1019 chat[193]: abort on (NO CARRIER)
> Nov 5 09:20:51 nl1019 chat[193]: abort on (VOICE)
> Nov 5 09:20:51 nl1019 chat[193]: abort on (NO DIALTONE)
> Nov 5 09:20:51 nl1019 chat[193]: abort on (NO ANSWER)
> Nov 5 09:20:51 nl1019 chat[193]: send (ATZ^M)
> Nov 5 09:20:51 nl1019 chat[193]: expect (OK)
> Nov 5 09:21:36 nl1019 chat[193]: alarm
> Nov 5 09:21:36 nl1019 chat[193]: Failed
> Nov 5 09:21:36 nl1019 pppd[192]: Connect script failed
> Nov 5 09:21:37 nl1019 pppd[192]: Exit.
> ---End---
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: