grub2 1.98+20100710-2: Please update debconf PO translation for the package grub2
Hi,
You are noted as the last translator of the debconf translation for
grub2.
GRUB 2 package templates are likely to be important ones for Squeeze because
of issues related to upgrading from GRUB legacy.
Indeed, they're important enough for being counted as part of "D-I level 2"
even though not strictly related to D-I.
I issue this specific call for translaiton updates because technical issues prevent
us from including grub2 package debconf statistics in the standard D-I
statistics and pages.
I would be grateful if you could take the time and update it.
Please send the updated file as a wishlist bug
against grub2. PLEASE AVOID SENDING IT DIRECTLY TO ME.
There is no strict deadline for receiving the updated translation.
Thanks in advance,
# grub2 po-debconf translation to Spanish
# Copyright (C) 2007, 2009 Software in the Public Interest
# This file is distributed under the same license as the grub2 package.
#
# Changes:
# - Initial translation
# Maria Germana Oliveira Blazetic<germanaoliveirab@gmail.com>, 2007
#
# - Updates
# Gary Ariel Sandi Vigabriel <gary.gsv@gmail.com>, 2009
# Francisco Javier Cuadrado <fcocuadrado@gmail.com>, 2009
#
# Traductores, si no conocen el formato PO, merece la pena leer la
# documentación de gettext, especialmente las secciones dedicadas a este
# formato, por ejemplo ejecutando:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
#
# Equipo de traducción al español, por favor lean antes de traducir
# los siguientes documentos:
#
# - El proyecto de traducción de Debian al español
# http://www.debian.org/intl/spanish/
# especialmente las notas y normas de traducción en
# http://www.debian.org/intl/spanish/notas
#
# - La guía de traducción de po's de debconf:
# /usr/share/doc/po-debconf/README-trans
# o http://www.debian.org/intl/l10n/po-debconf/README-trans
#
msgid ""
msgstr ""
"Project-Id-Version: grub2 1.96+20090829-2\n"
"Report-Msgid-Bugs-To: grub2@packages.debian.org\n"
"POT-Creation-Date: 2010-07-02 12:55+0100\n"
"PO-Revision-Date: 2009-08-30 19:42+0100\n"
"Last-Translator: Francisco Javier Cuadrado <fcocuadrado@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "¿Desea realizar la carga en cadena desde el archivo «menu.lst»?"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr ""
"Los scripts de actualización han detectado en «/boot/grub» una configuración "
"heredada de una versión anterior de GRUB."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to chainload GRUB 2 from "
"your existing GRUB Legacy setup. This step may be automaticaly performed "
"now."
msgstr ""
"Para reemplazar la versión anterior de GRUB en el sistema, se recomienda que "
"se configure «/boot/grub/menu.lst» para que cargue en cadena GRUB 2 a partir "
"de la configuración heredada de GRUB. Este paso se debería hacer de forma "
"automática."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that your new GRUB 2 setup is functional for you, before you install "
"it directly to your MBR (Master Boot Record)."
msgstr ""
"Antes de instalar GRUB 2 directamente en el MBR («Master Boot Record») se "
"recomienda que acepte cargarlo en cadena desde el archivo «menu.lst» y que "
"verifique que puede utilizar la nueva configuración de GRUB 2."
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In either case, whenever you want GRUB 2 to be loaded directly from MBR, you "
"can do so by issuing (as root) the following command:"
msgstr ""
"En cualquier caso, cuando quiera que GRUB 2 se cargue directamente desde el "
"MBR, puede hacerlo ejecutando (como usuario «root») la siguiente orden:"
#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB, ${MODEL})"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "GRUB installation failed. Continue?"
msgstr ""
#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway? If you do, your computer may not start up "
"properly."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid "GRUB installation failed. Try again?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device. Otherwise, the upgrade "
"from GRUB Legacy will be cancelled."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"You chose not to install GRUB to any devices. If you continue, the boot "
"loader may not be properly configured, and when your computer next starts up "
"it will use whatever was previously in the boot sector. If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"If you are already running a different boot loader and want to carry on "
"doing so, or if this is a special environment where you do not need a boot "
"loader, then you should continue anyway. Otherwise, you should install GRUB "
"somewhere."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""
#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Linea de órdenes de Linux:"
#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"La siguiente linea de órdenes de Linux se extrajo del archivo «/etc/default/"
"grub» o del parámetro «kopt» en el archivo «menu.lst» de la versión anterior "
"de GRUB. Por favor, compruebe que esto es correcto y modifíquelo si es "
"necesario."
#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Linea de órdenes predeterminada de Linux:"
#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr ""
"La siguiente cadena se utilizará como parámetros de Linux para la entrada "
"predeterminada del menú pero no para el modo de recuperación."
#. Type: string
#. Description
#: ../templates.in:3001
msgid "kFreeBSD command line:"
msgstr "Linea de órdenes de kFreeBSD:"
#. Type: string
#. Description
#: ../templates.in:3001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"La siguiente linea de órdenes de kFreeBSD se extrajo del archivo «/etc/"
"default/grub» o del parámetro «kopt» en el archivo «menu.lst» de la versión "
"anterior de GRUB. Por favor, compruebe que esto es correcto y modifíquelo si "
"es necesario."
#. Type: string
#. Description
#: ../templates.in:4001
msgid "kFreeBSD default command line:"
msgstr "Linea de órdenes predeterminada de kFreeBSD:"
#. Type: string
#. Description
#: ../templates.in:4001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr ""
"La siguiente cadena se utilizará como parámetros de kFreeBSD para la entrada "
"predeterminada del menú pero no para el modo de recuperación."
#. Type: note
#. Description
#: ../templates.in:5001
msgid "/boot/grub/device.map has been regenerated"
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"The file /boot/grub/device.map has been rewritten to use stable device "
"names. In most cases, this should significantly reduce the need to change "
"it in future, and boot menu entries generated by GRUB should not be affected."
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"However, since you have more than one disk in your system, it is possible "
"that you were depending on the old device map. Please check whether you "
"have any custom boot menu entries that rely on GRUB's (hdN) drive numbering, "
"and update them if necessary."
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"If you do not understand this message, or if you do not have any custom boot "
"menu entries, you can ignore this message."
msgstr ""
#~ msgid "GRUB 1.95 numbering scheme transition"
#~ msgstr "Esquema de transición numérica de GRUB 1.95"
#~ msgid ""
#~ "As of version 1.95, GRUB 2 has changed its numbering scheme. Partitions "
#~ "are now counted starting from 1 rather than 0. This is to make it "
#~ "consistent with device names of Linux and the other kernels used in "
#~ "Debian. For example, when using Linux as the kernel, \"(hd0,1)\" refers "
#~ "to the same partition as the /dev/sda1 device node."
#~ msgstr ""
#~ "GRUB 2 ha cambiado el esquema de numeración, como en la versión 1.95. "
#~ "Ahora las particiones comienzan en el número 1 en vez de en el número 0. "
#~ "Esto sirve para hacerlo consistente con los nombres de dispositivos de "
#~ "Linux y otros núcleos que se usan en Debian. Por ejemplo, cuando se usa "
#~ "Linux como núcleo, «(hd0, 1)» se refiere a la misma partición que el "
#~ "dispositivo «/dev/sda1»."
#~ msgid ""
#~ "Because of this, there's a chance your system becomes unbootable if "
#~ "update-grub(8) is run before GRUB is updated, generating a grub.cfg file "
#~ "that your installed GRUB won't yet be able to parse correctly. To ensure "
#~ "your system will be able to boot, you have to:"
#~ msgstr ""
#~ "Por este motivo, existe la posibilidad de que su sistema no sea capaz de "
#~ "arrancar si se ejecuta update-grub(8) antes de actualizar GRUB, ya que se "
#~ "generaría un archivo «grub.cfg» que la versión instalada de GRUB no "
#~ "podría leer correctamente. Para asegurarse de que el sistema arrancará, "
#~ "debe:"
#~ msgid ""
#~ " - Reinstall GRUB (typically, by running grub-install).\n"
#~ " - Rerun update-grub to generate a new grub.cfg."
#~ msgstr ""
#~ " - Reinstalar GRUB (normalmente, ejecutando grub-install).\n"
#~ "- Volver a ejecutar update-grub para generar un nuevo archivo «grub.cfg»."
Reply to: