[clamav] New translation needed
Me escribe Stephen Gran (clave DSA ID EA59038E) lo siguiente:
------------>
Hello,
I am writing to thank you for your previous translation work on clamav,
and to ask if you would be willing to help with another round of
translation. Some of the strings have been changed, and things like that,
so if you could resubmit any changes to the BTS, it would be greatly
appreciated. Attached are your previous translation, as well as the new
templates.
Thanks,
------------->
Los adjuntos que acompaña y que incluyo son:
* clamav.new.es.po: ampliado y conservando la anterior traducción del cual me
podría ocupar (como siempre con vuestra ayuda).
* clamav-daemon.templates.master
* clamav-freshclam.templates.master
De estos dos últimos desconozco "el formato" que debe seguir la
traducción. Nunca traduje una plantilla maestra. :-?
Gracias y un saludo.
Javi.
# clamav debconf translation to spanish
# Copyright (C) 2004 Software in the Public Interest
# This file is distributed under the same license as the clamav package.
#
# Changes:
# - Initial translation
# Fco. Javier Sánchez Castelo <javicastelo@ono.com>, 2004
# - Revision
# Ruben Porras <nahoo@inicia.es>
# Javier Fernández-Sanguino <jfs@debian.org>
# Santiago Vila <sanvila@unex.org>
#
# Traductores, si no conoce el formato PO, merece la pena leer la
# documentación de gettext, especialmente las secciones dedicadas a este
# formato, por ejemplo ejecutando:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
#
# Equipo de traducción al español, por favor lean antes de traducir
# los siguientes documentos:
#
# - El proyecto de traducción de Debian al español
# http://www.debian.org/intl/spanish/coordinacion
# especialmente las notas de traducción en
# http://www.debian.org/intl/spanish/notas
#
# - La guía de traducción de po's de debconf:
# /usr/share/doc/po-debconf/README-trans
# o http://www.debian.org/intl/l10n/po-debconf/README-trans
#
msgid ""
msgstr ""
"Project-Id-Version: clamav 0.60-10\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2004-02-12 22:13-0500\n"
"PO-Revision-Date: 2004-01-26 20:41+100\n"
"Last-Translator: Fco. Javier Sánchez Castelo <javicastelo@ono.com>\n"
"Language-Team: Debian Spanish <debian-l10n-spanish@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: note
#. Description
#: ../clamav-freshclam.templates.master:3
msgid "mirrors.txt is no longer supported"
msgstr ""
#. Type: note
#. Description
#: ../clamav-freshclam.templates.master:3
msgid ""
"Through the transition on handling it's mirror database through DNS, the "
"clamav team dropped support for them 'mirrors.txt' config file."
msgstr ""
#. Type: note
#. Description
#: ../clamav-freshclam.templates.master:3
msgid ""
"It looks like you entered additional mirrors there, so I did a backup of "
"that file as /var/lib/clamav/mirrors.txt.BACKUP."
msgstr ""
#. Type: note
#. Description
#: ../clamav-freshclam.templates.master:3
msgid ""
"All of your old mirrors (which may be way too much) are also added to the "
"new /etc/clamav/freshclam.conf configuration file, using the DatabaseMirror "
"keyword. Please examine it carefully after the update is through."
msgstr ""
#. Type: select
#. Choices
#: ../clamav-freshclam.templates.master:17
msgid "daemon, ifup.d, cron, manual"
msgstr ""
#. Type: select
#. Description
#: ../clamav-freshclam.templates.master:19
msgid "What is your prefered way to update the virus databases?"
msgstr ""
#. Type: select
#. Description
#: ../clamav-freshclam.templates.master:19
msgid ""
"daemon: freshclam is running as daemon all the time. You should choose this "
"if you have a permanent network connection."
msgstr ""
#. Type: select
#. Description
#: ../clamav-freshclam.templates.master:19
msgid ""
"ifup.d: freshclam will be running as daemon as long as your internet "
"connection is up. Choose this one if you have a dialup internet connection "
"and don't want freshclam to initiate new connections"
msgstr ""
#. Type: select
#. Description
#: ../clamav-freshclam.templates.master:19
msgid ""
"cron: freshclam is started from cron. Choose if you want full control of "
"when the database is updated."
msgstr ""
#. Type: select
#. Description
#: ../clamav-freshclam.templates.master:19
msgid ""
"manual: No automatic invocation of freshclam. This is not recommended, as "
"clamav's database is constantly updated."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:36
msgid "Enter a list of mirrors to download from, seperated by spaces"
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:43
msgid "Enter http proxy information, or leave blank for none:"
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:43
msgid ""
"If you need to use a http proxy to access the outside world, enter the proxy "
"information here. Otherwise, leave this blank."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:43
msgid "Please use URL syntax (\"http://host[:port]\";) here."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:51
msgid "Enter proxy user information, or leave blank for none"
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:51
msgid ""
"If you need supply a username and password to the proxy enter it here. "
"Otherwise, leave this blank."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:51
msgid "When entering user information, use the standard form of \"user:pass\""
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:61
msgid "How often should freshclam update the database (updates/day)?"
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:66
msgid "What network interface is connected to the internet?"
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:66
msgid ""
"If the daemon runs when the network is down the log file is filled with a "
"lot of entries like 'ERROR: Connection with database.clamav.net failed.', "
"making it easy to miss when freshclam really can't update the database."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:66
msgid ""
"If you don't know what network interface you use to connect to the internet "
"leave this field blank and the daemon will be started from the init scripts "
"instead."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:66
msgid ""
"If you do leave it blank make sure the computer is connected to the internet "
"at all times or your logs will be really hard to interpret."
msgstr ""
#. Type: string
#. Description
#: ../clamav-freshclam.templates.master:66
msgid "Example: eth0"
msgstr ""
#. Type: boolean
#. Description
#: ../clamav-freshclam.templates.master:83
msgid "Should clamd be notified after updates?"
msgstr ""
#. Type: boolean
#. Description
#: ../clamav-freshclam.templates.master:83
msgid ""
"Should clamd be notified to reload the database after successful updates?"
msgstr ""
#. Type: boolean
#. Description
#: ../clamav-freshclam.templates.master:83
msgid ""
"If you choose <no> here, clamd's database reloads will be notably delayed "
"(it performs this check every 6 hours by default), posing the risk a new "
"virus slips through although your database is up to date."
msgstr ""
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
msgid "Do you want to handle the daemon configuration with debconf?"
msgstr "¿Quiere gestionar la configuración del demonio mediante debconf?"
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
msgid ""
"There are quite a few options to be configured for clamav-daemon. The number "
"of questions asked to configure these options depends on the amount of "
"functionality activated as well as the debconf priority:"
msgstr ""
"Se pueden configurar bastantes opciones del demonio de clamav. El número de "
"preguntas que se realizarán para configurar estas opciones depende tanto de "
"la cantidad de funciones del programa que se deseen activar como del nivel "
"de prioridad de debconf definido:"
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
msgid "Critical, High: 0 questions"
msgstr "Crítico/alto: ninguna pregunta"
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
msgid "Medium: 5-12 questions"
msgstr "Medio: de 5 a 12 preguntas"
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
#, fuzzy
msgid "Low: 15-28 questions"
msgstr "Bajo: de 15 a 29 preguntas"
#. Type: boolean
#. Description
#: ../clamav-daemon.templates.master:4
msgid ""
"The daemon won't work if it isn't configured. If you have priority>= High "
"the daemon will be configured with default options. If you don't choose "
"debconf you'll have to configure /etc/clamav.conf manually or run 'dpkg-"
"reconfigure clamav-daemon' later. No matter if you choose debconf or not "
"manual changes in /etc/clamav.conf will be respected."
msgstr ""
"El demonio no funcionará si no está correctamente configurado. Si ha "
"configurado un nivel de prioridad alto o crítico en debconf, el demonio se "
"configurará con las opciones por omisión. Si no escoje que debconf configure "
"el demonio tendrá que configurar «/etc/clamav.conf» manualmente o ejecutar "
"posteriormente 'dpkg-reconfigure clamav-daemon'. Independientemente de si "
"escoje configuración a través de debconf o no lo hace, se respetarán los "
"cambios manuales en «/etc/clamav.conf»."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:25
msgid "Do you want the daemon to listen to a TCP or a UNIX socket?"
msgstr "¿Quiere que el demonio escuche en un puerto TCP o UNIX?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:25
msgid ""
"If you choose TCP the daemon can be accessed remotely. This isn't "
"recommended since the daemon runs as root and its a very young project. If "
"you choose local UNIX sockets the daemon can be accessed through a file."
msgstr ""
"Si escoje TCP se podrá acceder al demonio de forma remota. Esto no es "
"recomendable ya que el demonio se ejecuta como «root» y se trata aún de un "
"proyecto joven. Si escoje puertos UNIX locales el demonio sólo será "
"accesible a través de un fichero."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:25
msgid "Approximately question 2/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:35
msgid "What local (Unix) socket do you want the daemon to listen to?"
msgstr "¿En qué puerto local (Unix) quiere que escuche el demonio?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:43
#, fuzzy
msgid ""
"Do you want the daemon to gracefully handle left-over Unix socket files?"
msgstr "¿Quiere que el demonio analize todo fichero que sea abierto?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:50
#, fuzzy
msgid "What TCP port do you want the daemon to listen to?"
msgstr "¿En qué puerto TCP quiere que escuche el demonio?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:50
msgid "Approximately question 3/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:57
#, fuzzy
msgid "What TCP address do you want the daemon to listen to?"
msgstr "¿En qué puerto TCP quiere que escuche el demonio?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:57
msgid ""
"Type \"any\" to listen on every TCP address configured, or exactly one "
"address (e.g. \"127.0.0.1\") or hostname where the daemon should listen to."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:57
msgid "Approximately question 4/28."
msgstr ""
#. Type: note
#. Description
#: ../clamav-daemon.templates.master:65
msgid "Please enter a number"
msgstr "Por favor introduzca un número"
#. Type: note
#. Description
#: ../clamav-daemon.templates.master:65
msgid "A non numerical answer to this question cannot be understood."
msgstr "No se puede interpretar una respuesta no numérica a esta pregunta."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:72
msgid "Do you want to enable mail scanning?"
msgstr "¿Quiere habilitar el análisis del correo?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:72
msgid ""
"This option enables the daemon to scan mail contents for viruses. Do NOT "
"ENABLE THIS FEATURE on daemons with public access or production boxes. As "
"of writing this (20030920) new flaws in the mail code has been discovered "
"every week for months."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:72
msgid "Approximately question 5/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:84
msgid "Do you want to enable archive scanning?"
msgstr "¿Quiere habilitar el análisis de archivos?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:84
#, fuzzy
msgid ""
"If archive scanning is enabled the daemon will extract archives such as bz2, "
"tar.gz, deb and many more to check their contents for viruses."
msgstr ""
"Si se habilita el análisis de archivos el demonio extraerá el contenido de "
"archivos tales como .bz2, .tar.gz, .deb así como de otros tipos para buscar "
"virus en éstos."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:84
msgid ""
"For more information about what archives are supported see /usr/share/doc/"
"clamav/clamdeb.pdf.gz or the manpage clamscan(5)."
msgstr ""
"Para más información sobre los tipos de archivos que serán analizados vea «/"
"usr/share/doc/clamav/clamdeb.pdf.gz» o la página de manual clamscan(5)."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:84
msgid "Approximately question 6/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:97
#, fuzzy
msgid "Do you want to enable RAR archive scanning?"
msgstr "¿Quiere habilitar el análisis de archivos?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:97
msgid ""
"This enables the builtin RAR archiver. Use with caution, as the RAR code "
"may have memory leaks."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:97
msgid "Approximately question 7/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:107
msgid "Do you want to save streams to disk?"
msgstr "¿Quiere guardar secuencias en disco?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:107
#, fuzzy
msgid ""
"In order for archive scanning on streams to work the stream data needs to "
"saved on disk so they can be extracted. Mandatory if you want to use clamav-"
"milter."
msgstr ""
"Para que funcione el análisis de secuencias en archivos la secuencia de "
"datos necesita ser almacenada en disco de manera que puedan ser extraídos."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:107
msgid "Approximately question 8/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:117
msgid "Whats the maximum stream length (unit Mb) allowed?"
msgstr ""
"¿Cuál será la longitud máxima de secuencia permitida (en unidades de Mb)?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:117
msgid ""
"If you want you can set a limit on the stream length that can be scanned. "
"The value 0 disables this limit."
msgstr ""
"Si lo desea puede ajustar el límite de longitud de la secuencia que podrá "
"ser rastreada. El valor 0 desactiva este límite."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:126
msgid "What's the limit on the Archive recursion level?"
msgstr "¿Cuál es el límite para la extracción recursiva de archivos?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:126
msgid "The value 0 disables the recursion limit."
msgstr "El valor 0 desactiva el límite de recursión."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:134
msgid "What limit for the maximum number of files in an archive do you want?"
msgstr ""
"¿Cuál es el límite para el número máximo de ficheros dentro de un archivo?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:134
msgid "Approximately question 9/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:140
msgid "What's the largest file size in Mb you will scan inside archives?"
msgstr ""
"¿Cuál es el tamaño más grande de fichero en Mb que analizará dentro de los "
"archivos?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:140
msgid "The value 0 disables the size limit."
msgstr "El valor 0 inhabilita el límite de tamaño."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:140
msgid "Approximately question 10/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:148
msgid "What's the maximal directory depth that will be allowed?"
msgstr "¿Cuál es la máxima profundidad de directorio permitida?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:148
msgid ""
"You need to answer this question if you want to allow the daemon to follow "
"directory symlinks."
msgstr ""
"Necesita responder a esta pregunta si quiere permitir al demonio que siga "
"enlaces simbólicos a directorios."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:148
msgid "Enter 0 to disable maximal directory depth limit."
msgstr ""
"Introduzca 0 para desactivar el límite máximo de profundidad en directorios."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:148
msgid "Approximately question 11/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:160
msgid "Do you want the daemon to follow directory symlinks?"
msgstr "¿Quiere que el demonio siga los enlaces simbólicos a directorios?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:160
msgid "Approximately question 12/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:167
msgid "Do you want the daemon to follow regular file symlinks?"
msgstr ""
"¿Quiere que el demonio siga los enlaces simbólicos a ficheros normales?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:167
msgid "Approximately question 13/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:173
msgid "After how many seconds will the thread-scanner stop?"
msgstr "¿Después de cuántos segundos se detendrá el análisis en hilos?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:173
msgid "The value 0 disables the timeout."
msgstr "El valor 0 desactiva este límite de tiempo"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:173
msgid "Approximately question 14/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:181
msgid "How many threads will you allow the daemon to have?"
msgstr "¿Cuántos hilos podrá tener el demonio?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:181
msgid "Approximately question 15/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:188
#, fuzzy
msgid "Do you want to run the daemon process based instead of thread based?"
msgstr "¿Quiere que el demonio analize todo fichero que sea cerrado?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:188
msgid ""
"Note that process based execution is a new feature in version 0.65 and "
"probably not as stable as threads"
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:188
msgid "Approximately question 16/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:197
msgid "How many pending connections will you allow?"
msgstr "¿Cuántas conexiones pendientes permitirá?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:197
msgid "Approximately question 17/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:203
msgid "What paths do want to perform on-access scanning on?"
msgstr "¿En qué rutas quiere realizar análisis en función del acceso?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:203
msgid ""
"Separate the paths with colons. Leave the field blank to disable on-access "
"scanning. On-access scanning gives you the opportunity to scan all files "
"accessed for viruses. You need the dazuko kernel module for on-access "
"scanning."
msgstr ""
"Separe las rutas con dos puntos. Deje el campo en blanco para desactivar el "
"análisis en función del acceso. El análisis en función del acceso le da la "
"oportunidad de analizar todos los ficheros que sean accedidos en busca de "
"virus. Necesita el módulo «dazuko» en el núcleo para poder realizar análisis "
"en función del acceso."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:203
msgid "Approximately question 18/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:213
msgid "What paths shouldn't be on-access scanned?"
msgstr "¿Qué rutas no se deberían rastrear cuando sean accedidas?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:213
msgid ""
"/proc and /var/lib/clamav/ will be automatically added to this list, "
"otherwise clamscan will be disabled."
msgstr ""
"Se añadirán automáticamente «/proc» y «/var/lib/clamav/» a esta lista, si no "
"se incluyen se desactivará clamscan."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:213
msgid "Separate the paths with colons."
msgstr "Separe las rutas con dos puntos."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:213
msgid "Approximately question 19/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:225
msgid "Do you want the daemon to scan every file that's opened?"
msgstr "¿Quiere que el demonio analize todo fichero que sea abierto?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:225
msgid "Approximately question 20/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:233
msgid "Do you want the daemon to scan every file that's closed?"
msgstr "¿Quiere que el demonio analize todo fichero que sea cerrado?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:233
msgid "Approximately question 21/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:241
msgid "Do you want the daemon to scan every file that's executed?"
msgstr "¿Quiere que el demonio analize cada fichero que sea ejecutado?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:241
msgid "Approximately question 22/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:249
msgid "Do you want on-access scanning to scan into archives?"
msgstr ""
"¿Quiere que el análisis en función del acceso busque dentro de archivos?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:249
msgid ""
"Enable archive scanning. It uses the same Max limits as the TCP/UNIX "
"listening part of the daemon."
msgstr ""
"Al habilitar el análisis de archivos se utilizan los mismos límites máximos "
"especificados para el demonio que los específicos para los puertos TCP/UNIX "
"del demonio."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:249
msgid "Approximately question 23/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:258
msgid "What's the maximal file size (in Mb) allowed for on-access scanning?"
msgstr ""
"¿Cuál es el tamaño de fichero máximo (en Mb) que será analizado en función "
"del acceso?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:258
msgid "Sets a size limit on the on-access thread."
msgstr ""
"Establezca un tamaño límite para el análisis en función del acceso en hilos."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:258
msgid "Approximately question 24/28."
msgstr ""
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:267
msgid "Do you want to use the system logger?"
msgstr "¿Quiere usar el servico de registro de actividades del sistema?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:267
msgid ""
"It is possible to log daemon activity to the system logger. This can be done "
"independently of whether you want clamav-daemon to log system activities to "
"a special file"
msgstr ""
"Es posible registrar la actividad del demonio a través del sistema de "
"registro de actividades del sistema. Puede hacerlo independientemente de que "
"desee que el demonio clamav registre además las actividades del sistema en "
"un fichero específico."
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:267
msgid "Approximately question 25/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:277
msgid "Do you want the daemon to log its activities into a specified file?"
msgstr "¿Quiere que el demonio registre su actividad en un fichero específico?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:277
msgid ""
"If you don't want any logging just leave the field blank. If you activate "
"this feature you should make sure that you have the program logrotate "
"installed."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:277
msgid "Approximately question 26/28."
msgstr ""
#. Type: select
#. Choices
#: ../clamav-daemon.templates.master:285
msgid "Yes, No"
msgstr "Sí, No"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:287
msgid "Do you want to log time information with each message?"
msgstr "¿Quiere registrar información de hora con cada mensaje?"
#. Type: select
#. Description
#: ../clamav-daemon.templates.master:287
msgid "Approximately question 27/28."
msgstr ""
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:294
msgid "How often (in seconds) should the daemon perform a SelfCheck?"
msgstr ""
"¿Con qué frecuencia (en segundos) debería realizar el demonio una "
"autocomprobación?"
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:294
msgid ""
"During the SelfCheck the daemon checks if it needs to reload the virus "
"database. It also tries to repair problems caused by bugs in the daemon, i.e "
"in some cases its able to repair broken data structures."
msgstr ""
"Durante la autocomprobación el demonio determina si necesita recargar la "
"base de datos de virus. También intentará reparar problemas provocados por "
"fallos del demonio, por ejemplo, en algunos casos será posible reparar "
"estructuras de datos dañadas."
#. Type: string
#. Description
#: ../clamav-daemon.templates.master:294
msgid "Approximately question 28/28."
msgstr ""
#~ msgid "This option enables the daemon to scan mail contents for viruses."
#~ msgstr ""
#~ "Esta opción configura al demonio para que analize el contenido del correo "
#~ "en busca de virus."
#~ msgid "If you don't want any logging just leave the field blank."
#~ msgstr ""
#~ "Si no quiere que se realize ningún tipo de registro deje el campo en "
#~ "blanco"
#~ msgid "How large log file (Mb) will you allow?"
#~ msgstr "¿Qué tamaño máximo podrá tener el fichero de registro (en Mb)?"
#~ msgid "The value 0 disables the size check"
#~ msgstr "El valor 0 desactiva la comprobación del tamaño."
#~ msgid "Do you want to download new virus databases using a cron script?"
#~ msgstr ""
#~ "¿Quiere descargar una nueva base de datos de virus programando el «cron»?"
#~ msgid ""
#~ "V 0.50 of Clam Antivirus doesn't support the oav-database anymore. In "
#~ "order to be able to update the database faster (oav has been dead for "
#~ "long periods) the main database is now hosted by the author of Clam "
#~ "Antivirus (Tomasz Kojm). To detect new type of viruses (polymorphic and "
#~ "metapolymorphic) the database format has been changed."
#~ msgstr ""
#~ "A partir de la versión 0.50, el Antivirus Clam no aceptará la base de "
#~ "datos oav. Con el fin de que sea posible actualizar más rápido la base de "
#~ "datos (ha habido largos periodos en los que no ha habido actividad en "
#~ "oav) la base de datos principal la aloja ahora el autor del Antivirus "
#~ "Clam (Tomasz Kojm). Se ha cambiado el formato de la base de datos para "
#~ "poder detectar nuevos tipos de virus (polimórficos y metapolimórficos)."
#~ msgid ""
#~ "Freshclam has been fixed and now includes proxy support. The default way "
#~ "to update the database is to run freshclam from a cron script."
#~ msgstr ""
#~ "Freshclam ha sido reparado y ahora incluye soporte de proxies. El modo "
#~ "por omisión de actualizar la base de datos es ejecutar freshclam a través "
#~ "de un script del cron."
#~ msgid "The --daemon-notify option will be removed from /etc/cron.d/clamav."
#~ msgstr "Se eliminará la opción --daemon-notify de «/etc/cron.d/clamav»."
#~ msgid ""
#~ "0.54-11, 0.60-1 or 0.60-2 downloads a new database with the daemon-notify "
#~ "option, which caused problems."
#~ msgstr ""
#~ "Las versiones 0.54-11, 0.60-1 ó 0.60-2 descargan una base de datos nueva "
#~ "con la opción daemon-notify, lo que ocasionó problemas."
#~ msgid ""
#~ "Daemon-notify isn't needed since the daemon reloads the database often. "
#~ "The daemon reloads the database if needed every time it runs SelfCheck "
#~ "(default every 3600 seconds}. For more info about SelfCheck see clamav."
#~ "conf(5) in the clamav-daemon package."
#~ msgstr ""
#~ "No se necesita la opción daemon-notify ya que el demonio relee la base de "
#~ "datos con cierta frecuencia. El demonio relee la base de datos, si es "
#~ "necesario, cada vez que ejecuta la autocomprobación (por omisión cada "
#~ "3600 segundos). Para más información sobre la autocomprobación vea clamav."
#~ "conf(5), disponible en el paquete clamav-daemon."
#~ msgid "Freshclam will be executed as clamav user"
#~ msgstr "Se ejecutará Freshclam con el usuario clamav"
#~ msgid ""
#~ "If you have installed an old version (<0.60-1) of clamav/clamav-"
#~ "freshclam, freshclam downloads new databases as the root user. This could "
#~ "possibly lead to security problems, so 0.60-2+ defaults to the clamav "
#~ "user instead. . This update will replace the string 'root' in /etc/cron.d/"
#~ "clamav with 'clamav'. A change that won't touch any other changes made in "
#~ "the /etc/cron.d/clamav file. If you have already changed /etc/cron.d/"
#~ "clamav there is no need to worry. The change is ucf managed, so you'll "
#~ "have full control over conflicting changes."
#~ msgstr ""
#~ " Si ha instalado una versión anterior (< 0.60-1) de clamav/clamav-"
#~ "freshclam, freshclam descarga nuevas bases de datos como usuario root. "
#~ "Esto podría llevar a problemas de seguridad, por ello, desde la versión "
#~ "0.60-2, se realiza por omisión con el usuario clamav. Esta mejora cambia "
#~ "la cadena 'root' por 'clamav' en el fichero «/etc/cron.d/clamav». Es un "
#~ "cambio que no afecta a ninguna otra modificación hecha en el fichero «/"
#~ "etc/cron.d/clamav». No se preocupe si ya ha modificado «/etc/cron.d/"
#~ "clamav». El cambio será gestionado mediante ucf, de esta forma tendrá un "
#~ "control completo sobre cualquier modificación que introduzca un conflicto."
Template: clamav-daemon/debconf
Type: boolean
Default: true
_Description: Do you want to handle the daemon configuration with debconf?
There are quite a few options to be configured for clamav-daemon. The
number of questions asked to configure these options depends on the amount
of functionality activated as well as the debconf priority:
.
Critical, High: 0 questions
.
Medium: 5-12 questions
.
Low: 15-28 questions
.
The daemon won't work if it isn't configured. If you have priority>= High
the daemon will be configured with default options. If you don't choose
debconf you'll have to configure /etc/clamav.conf manually or run
'dpkg-reconfigure clamav-daemon' later. No matter if you choose debconf or
not manual changes in /etc/clamav.conf will be respected.
Template: clamav-daemon/TcpOrLocal
Type: select
Choices: TCP, UNIX
Default: UNIX
_Description: Do you want the daemon to listen to a TCP or a UNIX socket?
If you choose TCP the daemon can be accessed remotely. This isn't
recommended since the daemon runs as root and its a very young project. If
you choose local UNIX sockets the daemon can be accessed through a file.
.
Approximately question 2/28.
Template: clamav-daemon/LocalSocket
Type: string
Default: /var/run/clamav/clamd.ctl
_Description: What local (Unix) socket do you want the daemon to listen to?
.
Approximately question 3/28.
Template: clamav-daemon/FixStaleSocket
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want the daemon to gracefully handle left-over Unix socket files?
.
Approximately question 4/28.
Template: clamav-daemon/TCPSocket
Type: string
Default: 3310
_Description: What TCP port do you want the daemon to listen to?
.
Approximately question 3/28.
Template: clamav-daemon/TCPAddr
Type: string
Default: any
_Description: What TCP address do you want the daemon to listen to?
Type "any" to listen on every TCP address configured, or exactly one address
(e.g. "127.0.0.1") or hostname where the daemon should listen to.
.
Approximately question 4/28.
Template: clamav-daemon/numinfo
Type: note
_Description: Please enter a number
A non numerical answer to this question cannot be understood.
Template: clamav-daemon/ScanMail
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want to enable mail scanning?
This option enables the daemon to scan mail contents for viruses.
Do NOT ENABLE THIS FEATURE on daemons with public access or production
boxes. As of writing this (20030920) new flaws in the mail code has
been discovered every week for months.
.
Approximately question 5/28.
Template: clamav-daemon/ScanArchive
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want to enable archive scanning?
If archive scanning is enabled the daemon will extract archives such as
bz2, tar.gz, deb and many more to check their contents for viruses.
.
For more information about what archives are supported see
/usr/share/doc/clamav/clamdeb.pdf.gz or the manpage clamscan(5).
.
Approximately question 6/28.
Template: clamav-daemon/ScanRAR
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want to enable RAR archive scanning?
This enables the builtin RAR archiver. Use with caution, as
the RAR code may have memory leaks.
.
Approximately question 7/28.
Template: clamav-daemon/StreamSaveToDisk
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want to save streams to disk?
In order for archive scanning on streams to work the stream data needs to
saved on disk so they can be extracted.
Mandatory if you want to use clamav-milter.
.
Approximately question 8/28.
Template: clamav-daemon/StreamMaxLength
Type: string
Default: 0
_Description: Whats the maximum stream length (unit Mb) allowed?
If you want you can set a limit on the stream length that can be scanned.
The value 0 disables this limit.
.
Approximately question 9/28.
Template: clamav-daemon/ArchiveMaxRecursion
Type: string
Default: 5
_Description: What's the limit on the Archive recursion level?
The value 0 disables the recursion limit.
.
Approximately question 10/28.
Template: clamav-daemon/ArchiveMaxFiles
Type: string
Default: 1000
_Description: What limit for the maximum number of files in an archive do you want?
Approximately question 9/28.
Template: clamav-daemon/ArchiveMaxFileSize
Type: string
Default: 10
_Description: What's the largest file size in Mb you will scan inside archives?
The value 0 disables the size limit.
.
Approximately question 10/28.
Template: clamav-daemon/MaxDirectoryRecursion
Type: string
Default: 0
_Description: What's the maximal directory depth that will be allowed?
You need to answer this question if you want to allow the daemon to follow
directory symlinks.
.
Enter 0 to disable maximal directory depth limit.
.
Approximately question 11/28.
Template: clamav-daemon/FollowDirectorySymlinks
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want the daemon to follow directory symlinks?
Approximately question 12/28.
Template: clamav-daemon/FollowFileSymlinks
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want the daemon to follow regular file symlinks?
Approximately question 13/28.
Template: clamav-daemon/ThreadTimeout
Type: string
Default: 180
_Description: After how many seconds will the thread-scanner stop?
The value 0 disables the timeout.
.
Approximately question 14/28.
Template: clamav-daemon/MaxThreads
Type: string
Default: 5
_Description: How many threads will you allow the daemon to have?
Approximately question 15/28.
Template: clamav-daemon/UseProcesses
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want to run the daemon process based instead of thread based?
.
Note that process based execution is a new feature in version 0.65 and probably not as stable as threads
.
Approximately question 16/28.
Template: clamav-daemon/MaxConnectionQueueLength
Type: string
Default: 15
_Description: How many pending connections will you allow?
.
Approximately question 17/28.
Template: clamav-daemon/ClamukoIncludePath
Type: string
_Description: What paths do want to perform on-access scanning on?
Separate the paths with colons. Leave the field blank to disable on-access
scanning. On-access scanning gives you the opportunity to scan all files
accessed for viruses. You need the dazuko kernel module for on-access
scanning.
.
Approximately question 18/28.
Template: clamav-daemon/ClamukoExcludePath
Type: string
_Description: What paths shouldn't be on-access scanned?
/proc and /var/lib/clamav/ will be automatically added to this list,
otherwise clamscan will be disabled.
.
Separate the paths with colons.
.
Approximately question 19/28.
Template: clamav-daemon/ClamukoScanOnOpen
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want the daemon to scan every file that's opened?
.
Approximately question 20/28.
Template: clamav-daemon/ClamukoScanOnClose
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want the daemon to scan every file that's closed?
.
Approximately question 21/28.
Template: clamav-daemon/ClamukoScanOnExec
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want the daemon to scan every file that's executed?
.
Approximately question 22/28.
Template: clamav-daemon/ClamukoScanArchive
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want on-access scanning to scan into archives?
Enable archive scanning. It uses the same Max limits as the TCP/UNIX
listening part of the daemon.
.
Approximately question 23/28.
Template: clamav-daemon/ClamukoMaxFileSize
Type: string
Default: 5
_Description: What's the maximal file size (in Mb) allowed for on-access scanning?
Sets a size limit on the on-access thread.
.
Approximately question 24/28.
Template: clamav-daemon/LogSyslog
Type: select
_Choices: Yes, No
Default: No
_Description: Do you want to use the system logger?
It is possible to log daemon activity to the system logger. This can be
done independently of whether you want clamav-daemon to log system
activities to a special file
.
Approximately question 25/28.
Template: clamav-daemon/LogFile
Type: string
Default: /var/log/clamav/clamav.log
_Description: Do you want the daemon to log its activities into a specified file?
If you don't want any logging just leave the field blank. If you activate this
feature you should make sure that you have the program logrotate installed.
.
Approximately question 26/28.
Template: clamav-daemon/LogTime
Type: select
_Choices: Yes, No
Default: Yes
_Description: Do you want to log time information with each message?
.
Approximately question 27/28.
Template: clamav-daemon/SelfCheck
Type: string
Default: 3600
_Description: How often (in seconds) should the daemon perform a SelfCheck?
During the SelfCheck the daemon checks if it needs to reload the virus
database. It also tries to repair problems caused by bugs in the daemon,
i.e in some cases its able to repair broken data structures.
.
Approximately question 28/28.
Template: clamav-freshclam/mirrors.txt-note
Type: note
_Description: mirrors.txt is no longer supported
Through the transition on handling it's mirror database through DNS,
the clamav team dropped support for them 'mirrors.txt' config file.
.
It looks like you entered additional mirrors there, so I did a backup
of that file as /var/lib/clamav/mirrors.txt.BACKUP.
.
All of your old mirrors (which may be way too much) are also added to
the new /etc/clamav/freshclam.conf configuration file, using the
DatabaseMirror keyword. Please examine it carefully after the update
is through.
Template: clamav-freshclam/autoupdate_freshclam
Type: select
_Choices: daemon, ifup.d, cron, manual
Default: daemon
_Description: What is your prefered way to update the virus databases?
daemon: freshclam is running as daemon all the time. You should choose
this if you have a permanent network connection.
.
ifup.d: freshclam will be running as daemon as long as your internet
connection is up. Choose this one if you have a dialup internet
connection and don't want freshclam to initiate new connections
.
cron: freshclam is started from cron. Choose if you want full control
of when the database is updated.
.
manual: No automatic invocation of freshclam. This is not recommended,
as clamav's database is constantly updated.
Template: clamav-freshclam/mirrors
Type: string
Default: database.clamav.net
_Description: Enter a list of mirrors to download from, seperated by spaces
Freshclam needs to know where it should download databases from.
The default is to use database.clamav.net, which automatically uses one
of the many official mirrors throughout the world.
Template: clamav-freshclam/http_proxy
Type: string
_Description: Enter http proxy information, or leave blank for none:
If you need to use a http proxy to access the outside world, enter the
proxy information here. Otherwise, leave this blank.
.
Please use URL syntax ("http://host[:port]";) here.
Template: clamav-freshclam/proxy_user
Type: string
_Description: Enter proxy user information, or leave blank for none
If you need supply a username and password to the proxy enter it here.
Otherwise, leave this blank.
.
When entering user information, use the standard form of
"user:pass"
Template: clamav-freshclam/update_interval
Type: string
Default: 5
_Description: How often should freshclam update the database (updates/day)?
Template: clamav-freshclam/internet_interface
Type: string
Default:
_Description: What network interface is connected to the internet?
If the daemon runs when the network is down the log file is filled with a lot
of entries like 'ERROR: Connection with database.clamav.net failed.',
making it easy to miss when freshclam really can't update the database.
.
If you don't know what network interface you use to connect to the internet
leave this field blank and the daemon will be started from the init scripts
instead.
.
If you do leave it blank make sure the computer is connected to
the internet at all times or your logs will be really hard to interpret.
.
Example: eth0
Template: clamav-freshclam/NotifyClamd
Type: boolean
Default: yes
_Description: Should clamd be notified after updates?
Should clamd be notified to reload the database after successful updates?
.
If you choose <no> here, clamd's database reloads will be notably delayed
(it performs this check every 6 hours by default), posing the risk a new
virus slips through although your database is up to date.
Reply to: