This is the last call for comments for the review of debconf templates for nut. The reviewed templates will be sent on Friday, March 20, 2009 to the package maintainer as a bug report and a mail will be sent to this list with "[BTS]" as a subject tag. --
Template: nut/major_upstream_changes Type: error _Description: Configuration changes required Because of numerous changes by upstream authors to NUT's behavior and configuration file handling, /etc/nut/nut.conf must be modified before NUT can be restarted. . Please read /usr/share/doc/nut/UPGRADING.gz for the upgrading procedure.
Source: nut Section: admin Priority: optional Maintainer: Arnaud Quette <aquette@debian.org> Uploaders: Luca Filipozzi <lfilipoz@debian.org> Build-Depends: debhelper (>= 6.0.7~), autoconf, automake, libtool, libgd2-xpm-dev | libgd2-noxpm-dev, libsnmp-dev | libsnmp9-dev, libusb-dev (>= 0.1.8), libhal-dev (>= 0.5.8), hal, libdbus-1-dev, libdbus-glib-1-dev, libglib2.0-dev, po-debconf, libneon27-gnutls-dev | libneon26-gnutls-dev | libneon-dev | libneon27-dev | libneon26-dev, libpowerman0-dev (>= 2.3.3), libwrap0-dev (>= 7.6) Standards-Version: 3.8.0 Homepage: http://www.networkupstools.org Vcs-Browser: http://svn.debian.org/wsvn/nut Vcs-Svn: svn://svn.debian.org/nut/trunk Package: nut Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, debconf (>= 0.5.00), adduser, lsb-base (>= 3.0-6), ${udev} Recommends: bash-completion Suggests: nut-cgi, nut-snmp, nut-dev, nut-xml Provides: ups-monitor, nut-doc, nut-usb Conflicts: ups-monitor, nut-doc, nut-hal-drivers, nut-usb (<< 2.1.0-3), nut-dev (<< 2.2.2) Replaces: nut-doc Description: network UPS tools - core system NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides NUT's core system, and the serial and USB UPS drivers. In most cases it is sufficient for a basic UPS monitoring system. Package: nut-cgi Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, debconf (>= 0.5.00), adduser Recommends: apache | httpd Suggests: nut Replaces: nut (<< 1.1.11) Description: network UPS tools - web interface NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides an HTTP interface for Network UPS Tools which makes it possible to monitor the core NUT system with a web browser. Package: nut-snmp Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 1.4.1-pre1) Conflicts: nut (<= 1.4.0) Description: network UPS tools - SNMP driver NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides snmp-ups, the SNMP multi-MIB driver for UPS, which supports various MIBs including IETF, MGE, and APC. It adds an SNMP Manager interface to the core NUT system. Package: nut-hal-drivers Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, ${udev} Conflicts: nut Provides: hal-ups-support Description: network UPS tools - HAL interface NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides add-ons for the hardware abstraction layer (HAL) that allow desktop environments to monitor locally-connected UPS equipment. The HAL drivers cannot be used at the same time as the normal NUT upsd. Package: nut-xml Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 2.2.2) Description: network UPS tools - MGE XML/HTTP driver NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides netxml-ups, which supports all recent MGE models that use a Network Management Card or Proxy (MGE XML/HTTP protocol based). This applies to both MGE Office Protection Systems and to MGE UPS Systems. Package: nut-powerman-pdu Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 2.4.0), powerman (>= 2.3.3) Description: network UPS tools - PowerMan PDU driver NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides powerman-pdu, which allows NUT clients to communicate with the PowerMan daemon to support Power Distribution Units. Package: libupsclient1 Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: network UPS tools - client library NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides the shared client library. Package: libupsclient1-dev Section: libdevel Architecture: any Depends: libupsclient1 (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends} Provides: nut-dev Conflicts: nut-dev (<< 2.2.2) Description: network UPS tools - development files NUT is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) hardware. The server monitors the UPS and notifies its clients when the UPS is on or has a low battery. . This package provides the development files.
Attachment:
signature.asc
Description: Digital signature