The nut package introduced new or modified debconf templates. This is the perfect moment for a review to help the package maintainer following the general suggested writing style and track down typos and errors in the use of English language. If someone wants to pick up this review, please answer to this mail, in the mailing list, with an [ITR] (Intent To Review) label. The templates file is attached. To propose the file you reviewed for peer review, please send a [RFR] (Request For Review) mail with the reviewed file attached...then a few days later, when no more contributions come, a summary mail with a [LCFC] (Last Chance For Comments) label. Finally, after no more comments coming to the LCFC mail, you can send the reviewed templates file as a bug report against the package. Then, please notify the list with a last mail using a [BTS] label with the bug number. Helping the package maintainer to deal with induced translation updates at that moment will be nice. If you're not comfortable with that part of the process, please hand it off to a translator. --
Template: nut/major_upstream_changes Type: note _Description: Please manually modify your configuration files This is a serious advisory. Please take note. . There have been significant changes by the upstream authors to the behaviour of this software. Specifically, the configuration files in /etc/nut are different, some drivers have been renamed, ... . If you continue with the installation of this package, NUT will NOT restart unless you manually change your configuration files and edit /etc/nut/nut.conf. You have been warned! Please read /usr/share/doc/nut/UPGRADING.gz for the upgrading procedure.
Source: nut
Section: admin
Priority: optional
Maintainer: Arnaud Quette <aquette@debian.org>
Uploaders: Luca Filipozzi <lfilipoz@debian.org>
Build-Depends: debhelper (>= 6.0.7~), autoconf, automake, libtool, libgd2-xpm-dev | libgd2-noxpm-dev, libsnmp-dev | libsnmp9-dev, libusb-dev (>= 0.1.8), libhal-dev (>= 0.5.8), hal, libdbus-1-dev, libdbus-glib-1-dev, libglib2.0-dev, po-debconf, libneon27-gnutls-dev | libneon26-gnutls-dev | libneon-dev | libneon27-dev | libneon26-dev, libpowerman0-dev (>= 2.3.3), libwrap0-dev (>= 7.6)
Standards-Version: 3.8.0
Homepage: http://www.networkupstools.org
Vcs-Browser: http://svn.debian.org/wsvn/nut
Vcs-Svn: svn://svn.debian.org/nut/trunk
Package: nut
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, debconf (>= 0.5.00), adduser, lsb-base (>= 3.0-6), ${udev}
Recommends: bash-completion
Suggests: nut-cgi, nut-snmp, nut-dev, nut-xml
Provides: ups-monitor, nut-doc, nut-usb
Conflicts: ups-monitor, nut-doc, nut-hal-drivers, nut-usb (<< 2.1.0-3), nut-dev (<< 2.2.2)
Replaces: nut-doc
Description: The core system of the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains the core system, and the serial and USB UPS drivers.
In most cases it is sufficient for a basic UPS monitoring system.
Package: nut-cgi
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, debconf (>= 0.5.00), adduser
Recommends: apache | httpd
Suggests: nut
Replaces: nut (<< 1.1.11)
Description: A web interface sub system for the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains the web interface for Network UPS Tools. It adds
http interface to the core nut system so that one is able to monitor
the core system with a web browser.
Package: nut-snmp
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 1.4.1-pre1)
Conflicts: nut (<= 1.4.0)
Description: A meta SNMP Driver subsystem for the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains snmp-ups, the Meta SNMP UPS Driver, which support
different MIBS (IETF, MGE, APC) for Network UPS Tools. It adds an SNMP
Manager interface to the core system. You probably don't need it if
you don't understand what this is all about.
Package: nut-hal-drivers
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, ${udev}
Conflicts: nut
Provides: hal-ups-support
Description: HAL interface for NUT - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains addons for the hardware abstraction layer (HAL) that
allow desktop environments to monitor locally-connected UPS equipment. The
HAL drivers cannot be used at the same time as the normal NUT upsd.
Package: nut-xml
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 2.2.2)
Description: MGE XML/HTTP Driver subsystem for the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains netxml-ups, which support all recent MGE models which
use a Network Management Card or Proxy (MGE XML/HTTP protocol based). This
applies to both MGE Office Protection Systems and to MGE UPS SYSTEMS.
You probably don't need it if you don't understand what this is all about.
Package: nut-powerman-pdu
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, nut (>= 2.4.0), powerman (>= 2.3.3)
Description: PowerMan PDU Driver subsystem for the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains powerman-pdu, which support client communication with the
PowerMan daemon to provide Power Distribution Units support.
You probably don't need it if you don't understand what this is all about.
Package: libupsclient1
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: Client library for the nut - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains the shared client library.
Package: libupsclient1-dev
Section: libdevel
Architecture: any
Depends: libupsclient1 (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Provides: nut-dev
Conflicts: nut-dev (<< 2.2.2)
Description: Development files for NUT - Network UPS Tools
nut is a client/server uninterruptible power supply (UPS) monitoring system
that permits the sharing of one (or more) UPS between several machines. The
'server' monitors the UPS and notifies the 'clients' when the UPS is on
or has a low battery.
.
This package contains the development files.
Attachment:
signature.asc
Description: Digital signature