This is the last call for comments for the review of debconf templates for openslp. The reviewed templates will be sent on Saturday, September 22, 2007 to the package maintainer as a bug report and a mail will be sent to this list with "[BTS]" as a subject tag. --
Template: libslp1/multicast Type: error _Description: IP multicast enabled kernel needed to reduce traffic The current kernel does not support IP multicast. OpenSLP will continue to work even without multicast support in the kernel, by using broadcasts. However, broadcasts are less efficient on the network, so please consider upgrading to a multicast-enabled kernel. Template: libslp1/multicast-route Type: error #flag:translate!:3 _Description: Multicast route needed in /etc/network/interfaces There seem to be no multicast route configured. OpenSLP can take advantage of multicast packets and reduce traffic on the network. You can set up a multicast route automatically on system startup by adding the following commands to the "interface" line(s) in the /etc/network/interfaces file. . up route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 down route del -net 224.0.0.0 netmask 240.0.0.0 dev eth0
Source: openslp Section: net Priority: extra Maintainer: Ganesan Rajagopal <rganesan@debian.org> Build-Depends: debhelper (>= 4.1.26), debconf | debconf-2.0, autotools-dev Build-Conflicts: libssl-dev Standards-Version: 3.6.2 Package: slpd Section: net Priority: extra Architecture: any Depends: ${shlibs:Depends} Suggests: openslp-doc (= ${Source-Version}) Description: OpenSLP (Service Location Protocol) - server Service Location Protocol is an IETF standard protocol that is used to discover/advertise services on the network. It can be used for anything from locating a suitable printer in the neighborhood to discovering what LDAP directories are available in the organization. . This package provides slpd, the OpenSLP daemon, which provides an SLPv2 (RFC 2608) compliant Service Agent and Directory Agent. Package: openslp-doc Section: doc Priority: extra Architecture: all Description: OpenSLP (Service Location Protocol) - documentation Service Location Protocol is an IETF standard protocol that is used to discover/advertise services on the network. It can be used for anything from locating a suitable printer in the neighborhood to discovering what LDAP directories are available in the organization. . This package provides comprehensive documentation on SLP and the OpenSLP implementation; it contains an Introduction to SLP, a User's Guide, a Programmer's Guide and related RFCs. Package: libslp1 Section: libs Priority: optional Architecture: any Depends: ${shlibs:Depends}, debconf | debconf-2.0, net-tools Suggests: slpd (= ${Source-Version}), openslp-doc (= ${Source-Version}) Description: OpenSLP (Service Location Protocol) - libraries Service Location Protocol is an IETF standard protocol that is used to discover/advertise services on the network. It can be used for anything from locating a suitable printer in the neighborhood to discovering what LDAP directories are available in the organization. . This package provides the OpenSLP run-time library package that is linked to SLP aware applications. This library implements RFC 2614 - An API for Service Location. Unless there is an SLP DA on the network, you must install the slpd package to be able to advertise the services. Package: slptool Section: utils Priority: extra Architecture: any Depends: libslp1 (= ${Source-Version}) Suggests: openslp-doc (= ${Source-Version}) Description: OpenSLP (Service Location Protocol) - command line tool Service Location Protocol is an IETF standard protocol that is used to discover/advertise services on the network. It can be used for anything from locating a suitable printer in the neighborhood to discovering what LDAP directories are available in the organization. . This package provides a utility which can be used to practice with SLP. Package: libslp-dev Section: libdevel Priority: extra Architecture: any Depends: libslp1 (= ${Source-Version}), libc6-dev Suggests: openslp-doc (= ${Source-Version}) Conflicts: libxdelta3-dev Description: OpenSLP (Service Location Protocol) - development libraries Service Location Protocol is an IETF standard protocol that is used to discover/advertise services on the network. It can be used for anything from locating a suitable printer in the neighborhood to discovering what LDAP directories are available in the organization. . This package allows the development of SLP applications using the OpenSLP libraries. It includes headers, libraries and links to allow static and dynamic linking. It also includes slptool, a utility to test service advertisement/lookup. The library implements RFC 2614 - An API for Service Location.
Attachment:
signature.asc
Description: Digital signature