Re: [RFR] templates://no-ip/{templates}
Christian Perrier wrote:
> Your review should be sent as an answer to this mail.
> +_Description: noip2 package configuration
> + The noip2 package uses a configuration data file named
> + /etc/noip2.conf. Further questions are meant to fill in settigns in that file.
One typo in the templates file: settings
> + When configured correctly, the client will check the local IP address at a
> + given time interval. If it
> + has changed, the client will notify NO-IP.com DNS servers and update the
> + IP address for your No-IP/No-IP+ host name.
Make that "will notify the No-IP.com DNS servers" (and even out the
line lengths).
--
JBR
Ankh kak! (Ancient Egyptian blessing)
--- ../no-ip.old/debian/templates 2007-09-08 09:31:27.000000000 +0100
+++ debian/templates 2007-09-12 13:25:44.000000000 +0100
@@ -1,30 +1,26 @@
Template: noip2/introduction
Type: note
-_Description: noip2 configuration data file
- noip2 uses a configuration data file that is stored by default on Debian
- systems as /etc/noip2.conf. This setup will help in setting up a
- configuration data file on your system.
+_Description: noip2 package configuration
+ The noip2 package uses a configuration data file named
+ /etc/noip2.conf. Further questions are meant to fill in settings in that file.
.
- You will need to recreate the datafile whenever your account or password
- changes or when you add or delete hosts and/or groups at www.no-ip.com
- You can recreate the configuration data file by simply running the command
- .
- "dpkg-reconfigure noip2"
+ These settings must be updated whenever your account or password
+ changes or when you add or delete hosts and/or groups at
+ www.no-ip.com. This can be done by reconfiguring this package by
+ running 'dpkg-reconfigure noip2' as root.
Template: noip2/username
Type: string
-_Description: No-IP.com username:
- Please enter your No-IP.com account username (usually your email address).
+_Description: No-IP.com user name:
+ Please enter your No-IP.com account user name (usually your email address).
Template: noip2/password
Type: password
_Description: No-IP.com password:
- Please enter your No-IP.com account password.
Template: noip2/updating
Type: string
Default: 30
_Description: Update interval (in minutes):
- Please enter the updating frequency (in minutes) you wish the
- noip2 client to use to update to your most current IP address. Press enter if
- you wish to use the default update interval of 30 minutes.
+ Please enter the updating frequency (in minutes) the noip2 client
+ should use to refresh the record of your IP address.
--- ../no-ip.old/debian/control 2007-09-08 09:31:27.000000000 +0100
+++ debian/control 2007-09-12 13:25:18.000000000 +0100
@@ -12,12 +12,11 @@
Provides: no-ip
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: A second-generation Linux client for dynamic DNS service
- This is the No-IP.com Dynamic DNS update client.
+Description: client for dynamic DNS service
+ This package provides the No-IP.com Dynamic DNS update client.
.
- When configured correctly, the client will check your IP address at a
- given time interval checking to see if your IP has changed. If your
- IP address has changed it will notify our dns servers and update the
- IP corresponding to your No-IP/No-IP+ hostname.
+ When configured correctly, the client will check the local IP address at a
+ given time interval. If it has changed, the client will notify the No-IP.com
+ DNS servers and update the IP address for your No-IP/No-IP+ host name.
.
- Home Page: http://www.no-ip.com
+ Homepage: http://www.no-ip.com
Template: noip2/introduction
Type: note
_Description: noip2 package configuration
The noip2 package uses a configuration data file named
/etc/noip2.conf. Further questions are meant to fill in settings in that file.
.
These settings must be updated whenever your account or password
changes or when you add or delete hosts and/or groups at
www.no-ip.com. This can be done by reconfiguring this package by
running 'dpkg-reconfigure noip2' as root.
Template: noip2/username
Type: string
_Description: No-IP.com user name:
Please enter your No-IP.com account user name (usually your email address).
Template: noip2/password
Type: password
_Description: No-IP.com password:
Template: noip2/updating
Type: string
Default: 30
_Description: Update interval (in minutes):
Please enter the updating frequency (in minutes) the noip2 client
should use to refresh the record of your IP address.
Source: no-ip
Section: net
Priority: optional
Maintainer: Andres Mejia <mcitadel@gmail.com>, Otavio Salvador <otavio@debian.org>
Build-Depends: debhelper (>= 5), po-debconf, quilt
Standards-Version: 3.7.2
XS-Vcs-Git: git://git.debian.org/git/collab-maint/no-ip.git
XS-Vcs-Browser: http://git.debian.org/?p=collab-maint/no-ip.git
Package: noip2
Replaces: no-ip
Provides: no-ip
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: client for dynamic DNS service
This package provides the No-IP.com Dynamic DNS update client.
.
When configured correctly, the client will check the local IP address at a
given time interval. If it has changed, the client will notify the No-IP.com
DNS servers and update the IP address for your No-IP/No-IP+ host name.
.
Homepage: http://www.no-ip.com
Reply to: